Rako RMT-PILL Technical Specifications

Page 1

Datasheet RMT-PILL 250W Trailing Edge Dimmer What is the RMT-PILL? Technical Data The RMT-PILL trailing edge dimmer is suitable for mains Dimensions 50x50x19.5mm dimmable LEDs or halogens. It is intended to be installed in Input Supply 230V AC 50Hz, a backbox as a retrofit solution. Weight 46g The RMT-PILL requires a neutral connection for LED Housing UL94-V0 loads. Connections Input: 2-way screw terminal RMT-PILL modules can be controlled by any Rako device Output: 2-way screw terminal that transmits wireless messages. Climate Range Temperature +2C to +40C Humidity +5% to 95% The RMT-PILL is not suitable for inductive loads. non-condensing Load Types Trailing edge dimmable only: Features Mains LED (with neutral) Electronic low voltage transformer • Up to 16 custom Scenes Minimum Load With neutral - 1W • Keypad or software programmable Without neutral - 60W Maximum Load 250W • Customisable fade rates and dimming profiles 2 • LED diagnostic feedback Terminal Size 4.0mm • Manual test/programming button Standards RoHS UKCA, CE Connections/Dimensions EN 60669-2-5:2016 Communication FM radio, 433.9MHz Installation and Setup For information on installing and setting up the RMT-PILL, see the RMT-PILL Manual. Document Version 2.0.0 telephone +44 (0) 1634 226666 | www.rakocontrols.com WE RESERVE THE RIGHT TO CHANGE THE SPECIFICATION AND DATA HEREWITH WITHOUT NOTICE. © 2024 RAKO CONTROLS LIMITED