Rako RDA-800 Technical Specifications

Page 1

Datasheet RDA-800 0-10V/DSI/DLI Controller What is the RDA-800? Technical Data The RDA-800 is a multifunctional dimming unit that controls Dimensions 172x46x40mm 0-10V, DLI, or DSI drivers. Input Supply 230V AC 50Hz The mains supply to the drivers can be controlled by the Weight 205g mains output using the built-in relay. Housing UL94-V0 Mains IN/OUT - 3way screw terminal The RDA-800 has been designed for flexible installation, Connections Dimming Control - 2 way screw terminal for a retrofit solution it can be installed behind a ceiling or if the lighting is wired back to a central location it can be Climate Range Temperature +2C to +40C mounted centrally using the supplied mounting bracket. Humidity +5% to 95% non-condensing Fuse 5A 20mm Features Load Types 0-10V, DSI and DALI Ballasts • Up to 16 custom Scenes • Keypad or software programmable Minimum Load N/A • Customisable fade rates and dimming profiles Maximum Load 800W (mains output) • LED diagnostic feedback 2 • Configurable for 0-10V, DLI or DSI Terminal Size 4.0mm Standards RoHS UKCA, CE Connections/Dimensions EN 60669-2-5:2016 Communication FM radio, 433.9MHz Installation and Setup For information on installing and setting up the RDA-800, see the RDA-800 Manual. Document Version 2.0.0 telephone +44 (0) 1634 226666 | www.rakocontrols.com WE RESERVE THE RIGHT TO CHANGE THE SPECIFICATION AND DATA HEREWITH WITHOUT NOTICE. © 2024 RAKO CONTROLS LIMITED