Rako RAK8-S Technical Specifications

Page 1

Datasheet RAK8-S 8-Channel Switching RAK What is the RAK8-S Technical Data The RAK8-S is an 8-Channel switching board designed to Dimensions 193x253x110mm control non-dimmable loads such as lights, pumps and contactors. Input Supply 230V AC 50Hz, 10A Type B MCB Protection The RAK8-S combined with a Link device (Rx-LINK or Required RAK-LINK) can either be used as a single 8-Channel unit or Weight 3.5Kg formed into a “stack” of up to 32 circuits or 4 RAK boards. Fuse 8 x 5A 20mm Fuse NB 1 x 15A 35mm Fuse The Rx-LINK has a limit of 16 Channels per unit, if more Housing Powder coated galvanised steel Channels are required then additional Rx-LINK units must Connections Supply IN: 3-way screw be used. terminal Outputs: 8-way screw terminal With eight independent switching relays, multiple load types can be Climate Range Temperature +2C to +40C connected to each output of the RAK8-S such as: Humidity +5% to 95% non-con- densing • LED; GU10, B22, E14, G8 Load Types LED, Transformers, Motors • Transformers; MR16, GU5.3, Halogen • Motors; Fan, Pump Minimum Load N/A Maximum Load Mains LED - 300W Incandescent - 600W Connections/Dimensions Transformer - 300W (cos Φ => 0.6) Motor - 1A (1/3 HP Fan) Terminal Sizes Stranded - 2.5mm2 Solid - 4.0mm2 Cable Entry Multiple knockouts on top, bottom, side and rear. Standards RoHS UKCA, CE EN 60669-2-5:2016 Communication RS485 to RAKs, RxLINK and RAK-LINK Installation and Setup For information on installing and setting up the RAK8-S, see the RAK8-S Manual. Document Version 2.0.0 telephone +44 (0) 1634 226666 | www.rakocontrols.com WE RESERVE THE RIGHT TO CHANGE THE SPECIFICATION AND DATA HEREWITH WITHOUT NOTICE. © 2024 RAKO CONTROLS LIMITED