This document could not be shown here. Open the PDF.
Text of this document7 pages · 1,234 words
Page 1
product specifications 369806h 01.17.25 RF Dimming Module with 0–10 V- Control Compatible with RA2 Select, RadioRA 2, RadioRA 3, and HomeWorks systems The RF dimming module with 0–10 V- control is a radio frequency (RF) control that operates 0–10 V- controlled fluorescent ballasts or LED drivers based on input from RA2 Select, RadioRA 2, RadioRA 3, and HomeWorks systems. • 0–10 V- control link automatically sources or sinks up to 60 mA to third-party fixtures. • Switches line voltage up to 5 A. • Configurable high- and low-end trim. • Various operating voltages available—refer to Models chart below for details on voltage requirements. • Utilizes Lutron Clear Connect RF technology—refer to Models chart below for frequency band data and Lutron system compatibility. • RadioRA 2, RadioRA 3, or HomeWorks software required for system functionality. • Mounts to an electrical junction box through a 1/2 in (21 mm) knockout opening. • Complies with requirements for use in a LMJ-5T-DV-B model shown compartment handling environmental air (plenum) per NEC® 2011 300.22(C)(3) (LMJ- model only). Models Operating Compatible Model Number Region Voltage Frequency Band Systems LMJ-5T-DV-B U.S.A., Canada, Mexico 120 / 277 V~ 434 MHz LMK-5T-DV-B Europe, U.A.E. 868 MHz RA2 Select, LMM-5T-DV-B China 868 MHz Limited RadioRA 2, 220–240 V~ RadioRA 3, LMN-5T-DV-B India 865 MHz HomeWorks LMQ-5T-DV-B Hong Kong, Israel 434 MHz Limited NOTE: Contact Lutron for frequency band compatibility for your geographic region if it is not indicated above. Customer Assistance: www.lutron.com/support 1 1.844.LUTRON1 (U.S.A. / Canada) +44.(0)20.7680.4481 (Europe)
Page 2
product specifications 369806h 01.17.25 RF Dimming Module with 0–10 V- Control Specification Power 120 / 277 V~ 50 / 60 Hz 5 A (LMJ- model) 220–240 V~ 50 / 60 Hz 5 A (LMK-, LMM-, LMN-, LMQ- models) Typical Power < 1.0 W Consumption Typical power test conditions: all loads off Regulatory Approvals cULusR, UL 2043 Plenum Rated, FCC Approved. Complies with the limits for a Class B device, pursuant to Part 15 of the FCC rules: IC, NOM, ANATEL (LMJ- model) CE, TRA, CITC (LMK- model) WPC (LMN- model) Environment Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C) Ambient operating humidity: 0% to 90% humidity, non-condensing. Indoor use only. Communications Operates using Clear Connect RF technology for reliable wireless communication; refer to model number chart on page 1 for frequency band details. RF range is 30 ft (9 m) from repeaters. Contact Lutron for applications using foil-backed or metallic ceiling tiles. Load 0–10 V- Control Link Maximum Load: 60 mA, source or sink automatically configures. Control link compatible with ANSI E1.3 2001 (R2006), IEC 60929 Annex E. Switched Maximum Load: 5 A lighting. No minimum load requirements. Load types include, but are not limited to: MLV, ELV, Incandescent, Magnetic fluorescent, Electronic fluorescent and LEDs. Surge Protection Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits. Mounting Mounts to an electrical junction box through a 1/2 in (21 mm) knockout opening. Warranty www.lutron.com/TechnicalDocumentLibrary/Warranty.pdf www.lutron.com/TechnicalDocumentLibrary/Intl_Warranty.pdf Customer Assistance: www.lutron.com/support 2 1.844.LUTRON1 (U.S.A. / Canada) +44.(0)20.7680.4481 (Europe)
Page 3
product specifications 369806h 01.17.25 RF Dimming Module with 0–10 V- Control Dimensions Dimensions are shown as: in (mm) 1/2 in (21 mm) knockout opening 3.94 3.42 (100.1) (86.9) 2.82 1.25 (71.6) (31.8) Dimensions for all models. Model LMJ-5T-DV-B shown. Customer Assistance: www.lutron.com/support 3 1.844.LUTRON1 (U.S.A. / Canada) +44.(0)20.7680.4481 (Europe)
Page 4
product specifications 369806h 01.17.25 RF Dimming Module with 0–10 V- Control Wiring Schematics LMJ- and LMQ- models: Use the supplied conduit nut and wire the module as shown. 120 / 277 V~ 50 / 60 Hz (LMJ- model) 220–240 V~ 50 / 60 Hz (LMQ- model) 1 Junction Box Line / Hot Switched Hot To Fluorescent Ballasts / LED Drivers Neutral Neutral 1/2 in (21 mm) Knockout Opening Conduit Nut 0–10 V- to Fluorescent + Ballasts / LED Drivers2 + – 1 Some applications (in the U.S.A.) require the RF module to be installed inside an additional junction box. For information about how to perform this installation see Application Note #423 (P/N 048423) at www.lutron.com Please consult all local and national electric codes for proper installation methods. 2 2 2 Use 18 AWG to 16 AWG (0.75 mm to 1.5 mm ) solid wire only Customer Assistance: www.lutron.com/support 4 1.844.LUTRON1 (U.S.A. / Canada) +44.(0)20.7680.4481 (Europe)
Page 5
product specifications 369806h 01.17.25 RF Dimming Module with 0–10 V- Control Wiring Schematics (continued) LMK-, LMM-, and LMN- models: 220–240 V~ 50 / 60 Hz 1 Junction Box Line / Hot Switched Hot To Fluorescent Ballasts / LED Drivers Neutral Neutral 0–10 V- to Fluorescent + Ballasts / LED Drivers Conduit Nut 1/2 in (21 mm) Knockout Opening 1 R F module can be installed in a junction box or marshalling box. Please consult all local and national electric codes for proper installation methods. Customer Assistance: www.lutron.com/support 5 1.844.LUTRON1 (U.S.A. / Canada) +44.(0)20.7680.4481 (Europe)
Page 6
product specifications 369806h 01.17.25 RF Dimming Module with 0–10 V- Control Communications Wired and RF Configuration (RadioRA 2 and HomeWorks) Repeater * RF Dimming Module RF Dimming Module RF Dimming Module 30 ft (9 m) maximum Hybrid Repeater Hybrid Repeater Hybrid Repeater Hybrid Repeater Repeater Status Repeater Status Repeater Status P 1 2 3 4 P 1 2 3 4 P 1 2 3 4 Communication Communication Communication RF Wired RF Wired RF Wired Setup Test Activate Setup Test Activate Setup Test Activate Test Add Test Add Test Add Power Repeater Link Power Repeater Link Power Repeater Link 9 V COM24 MUMU 9 V COM24 MUMU 9 V COM24 MUMU 1 V2 X3 X4 1 V2 X3 X4 1 V2 X3 X4 30 ft (9 m) 30 ft (9 m) maximum maximum RF Link RF Link 1000 ft (305 m) maximum 60 ft (18 m) 1000 ft (305 m) maximum wire length per run maximum wire length per run * In HomeWorks systems, use Hybrid Repeaters for range extension. In RadioRA 2, the repeater shown may be either a main repeater (1 required) or auxiliary repeater (up to 4 permitted). RA2 Select RF Range Radio Powr Savr Occupancy / Vacancy Pico Radio Powr Savr Sensor Remote Occupancy / Vacancy Control Sensor RF 30 ft (9 m) 30 ft (9 m) Module maximum maximum Main Wireless Repeater Repeater Shade RF Sivoia QS Module 60 ft (18 m) maximum All devices must be located within 30 ft (9 m) of a repeater. The range can be extended with up to 4 Lutron wireless repeaters (Lx-REPPRO). Customer Assistance: www.lutron.com/support 6 1.844.LUTRON1 (U.S.A. / Canada) +44.(0)20.7680.4481 (Europe)
Page 7
product specifications 369806h 01.17.25 RF Dimming Module with 0–10 V- Control Communications (continued) RadioRA 3 RF Range Radio Powr Savr RF Pico Radio Powr Savr Occupancy / Vacancy Module Remote Occupancy / Vacancy Sensor Control Sensor 30 ft (9 m) maximum 30 ft (9 m) maximum Processor Wireless Shade Repeater RF Module 60 ft (18 m) maximum All devices must be located within 30 ft (9 m) of a RadioRA 3 processor or wireless repeater. The range can be extended with up to 4 wireless repeaters on a single RF link. Lutron, Clear Connect, HomeWorks, Pico, RA2 Select, Radio Powr Savr, RadioRA, RadioRA 2, RadioRA 3, and Sivoia QS are trademarks or registered trademarks of Lutron Electronics Co., Inc. in the US and/or other countries. All other product names, logos, and brands are property of their respective owners. Customer Assistance: www.lutron.com/support 7 1.844.LUTRON1 (U.S.A. / Canada) +44.(0)20.7680.4481 (Europe)
Need assistance or looking to source this item?