This document could not be shown here. Open the PDF.
Text of this document7 pages · 1,358 words
Page 1
product specifications 3691312a 01.08.25 RadioRA 3 In-Line Load Controls The RadioRA 3 family of in-line dimmers, switches and fan controls can control lighting, motor, and fan loads and provide a system that is convenient and easy to install. RadioRA 3 in-line load controls use Lutron patented Clear Connect Type A RF technology which provides reliable, wireless communication with other RadioRA 3 devices. Using a RadioRA 3 processor allows devices to be part of a whole house solution that can be controlled remotely from anywhere in the world. Control Model Number Frequency Country / Type Region Features Dimmer RR3K-R25NE-240 868 MHz UK • The reverse-phase dimmer is trailing-edge Switch RR3K-R6ANS-240 868 MHz UK capable of up to 250 W of Fan Control RR3K-RNFSQ-240 868 MHz UK incandescent / halogen / ELV loads and up to 1 A / 150 W of LED. • The switch is rated for 6 AX of general purpose lighting load and 2 A / 0.5 HP of motor load. • The four-speed fan control is rated for a single AC ceiling fan up to 100 W.* • When used with a RadioRA 3 processor, the load controls can be programmed via the Lutron 1 Designer PC Tool and controlled via lighting 2 scenes, scheduled daily events, the Lutron App , and other RadioRA 3 system features. Also, the load controls can be controlled from anywhere in the world. • Small size allows for simple retrofit installation. • Remote device association allows for in-line controls to be added to a system without physically accessing product. • When powered on in an unaddressed state (not paired with a Pico wireless control or activated in a system), the fan control will turn on the fan for two (2) minutes to allow the installer to verify that the device is installed and wired correctly. • The four fan speed settings (low, medium, medium high, and high) can be adjusted to be faster or slower to optimize each for the specific ceiling fan that is being used. This feature is accessible within the device settings in the Lutron app. * Use to control one AC ceiling fan. Not for use with DC motor fans, fans with integrated light control modules, fans with remote controls, or WI-FI only fans. Not for use with shaded-pole type motors (e.g., bathroom or kitchen exhaust-type fans). 1 T he PC tool requires a 32 or 64 bit processor running Windows 10, with a recommended minimum of 8 GB of RAM, 4 GB disk space, and a 2.67 GHz Core i5 processor. 2 The Lutron App is required for setup and use with the RadioRA 3 processor. The Lutron App is compatible with iOS and Android devices. See the Apple App Store and Google Play store for the minimum version requirements. Customer Assistance: www.lutron.com/RA3Support 1 +44.(0)20.7702.0657 (UK & Europe)
Page 2
product specifications 3691312a 01.08.25 RadioRA 3 In-Line Load Controls Specifications Power 220 – 240 V~ 50/60 Hz Typical Power Dimmer / Switch / Fan Control: <0.5 W Consumption Test conditions: Load and LED are off Lutron Quality Systems registered to ISO 9001:2015 Regulatory Approvals CE Marked UKCA Marked RoHS Compliant Environment Ambient operating temperature: 0 °C to 40 °C, 0% to 90% humidity, non-condensing. Indoor use only. RadioRA 3 in-line load controls communicate with the system through Radio Communications Frequency (RF). They must be located within 18 m line-of-sight or 9 m through walls of a Pico wireless control, Radio Powr Savr sensor, processor, or wireless repeater. System devices operate on 868 MHz. ESD Protection Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2. Tested to withstand surge voltages without damage or loss of operation, in Surge Protection accordance with IEEE C62.41-1991 Recommended Practice for Surge Voltages in Low-Voltage AC Power Circuits. Power Failure Power failure memory: should power be interrupted, the control will return to its previously set level prior to the interruption when power is restored. Allow adequate space to ensure convective cooling of load control. Remove any insulation, heat generating equipment, or obstructions within 120 mm of the load control. Mounting For optimal RF performance, no metal or other electrically conductive material should be present within 120 mm around the top and sides of the load control. The load control is not suitable for installation in places where it is fully enclosed in metal (e.g., metal enclosures, electrical cabinets) or within metal ceilings. RadioRA 3 in-line controls accept wire gauges between 2 2 0.5 mm to 2.5 mm . Wiring Note: All outside wire diameters must be the same and must be between 5.2 mm – 8.5 mm. With repeater: Up to 100 devices (e.g., load controls, Pico wireless controls, Radio Powr Savr sensors, shades, and repeaters) are supported per RF link. The processor counts as one device and four locations are reserved for wireless Device Limits repeaters. Note: Load controls have load type and capacity limits. For more information, see Load Type and Capacity. Warranty www.lutron.com/europe/Service-Support/Pages/Service/Warranty Customer Assistance: www.lutron.com/RA3Support 2 +44.(0)20.7702.0657 (UK & Europe)
Page 3
product specifications 3691312a 01.08.25 RadioRA 3 In-Line Load Controls Dimensions All dimensions are shown as: mm 32 153 46 Mounting and Installation All dimensions are shown as: mm I n n s io ula t t ula ion s n I 120 120 105 ø 50 26 Customer Assistance: www.lutron.com/RA3Support 3 +44.(0)20.7702.0657 (UK & Europe)
Page 4
product specifications 3691312a 01.08.25 RadioRA 3 In-Line Load Controls Load Type and Capacity Model Voltage Load Types E RR3K-R25NE-240 1 A 250 W – Incandescent, halogen, ELV LV 1 A 150 W – LED* LED DEL 220 – 240 V~ E M 50/60 Hz 6 AX Lighting (all types) LED LV LV RR3K-R6ANS-240 DEL 2 A / 0.5 HP Motor M RR3K-RNFSQ-240 100 W max. one (1) AC ceiling fan** * LED rating is 1 A. If no current rating is specified, a power rating of 150 W can be used. Higher ratings (up to the incandescent rating) can be achieved for specific LED fixtures based on Lutron testing results. Refer to lutron.com/ledtool for compatibility testing results and the maximum number of LED fixtures. Using LED fixtures that are not tested can result in the fixtures not turning on or poor dimming quality. LED dimming performance can vary from fixture to fixture and cannot be guaranteed. ** Use to control one AC ceiling fan. Not for use with DC motor fans, fans with integrated light control modules, fans with remote controls, or Wi-Fi only fans. Not for use with shaded-pole type motors (e.g., bathroom or kitchen exhaust-type fans). Customer Assistance: www.lutron.com/RA3Support 4 +44.(0)20.7702.0657 (UK & Europe)
Page 5
product specifications 3691312a 01.08.25 RadioRA 3 In-Line Load Controls Wiring L = Live = Earth N = Neutral Breaker = Dimmed Live Panel = Switched Live = Fan Live L N / / lutron.com N Load lutron.com Strain relief Customer Assistance: www.lutron.com/RA3Support 5 +44.(0)20.7702.0657 (UK & Europe)
Page 6
product specifications 3691312a 01.08.25 RadioRA 3 In-Line Load Controls Operation lutron.com Green - B links when load is toggled Flashes during association Blue - Advanced programming mode (APM) Red - Blinks when error RF Range lutron.co m Radio Powr In-line load control Pico Radio Powr Savr sensor wireless Savr sensor control 9 m maximum 9 m maximum Processor Wireless Repeater lutron.com Shade In-line load control 18 m maximum All devices must be located within 9 m of a RadioRA 3 processor or wireless repeater. The range can be extended with up to four wireless repeaters on a single RF link. Customer Assistance: www.lutron.com/RA3Support 6 +44.(0)20.7702.0657 (UK & Europe)
Page 7
product specifications 3691312a 01.08.25 RadioRA 3 In-Line Load Controls Model Numbers RR3K-RXXXX-240 Device Type Device Type 6ANS = Switch (Neutral Required) 25NE = Dimmer (Neutral Required) NFSQ = Fan Control (Neutral Required) Lutron, Pico, Radio Powr Savr and Clear Connect are trademarks or registered trademarks of Lutron Electronics Co., Inc. in the US and/ or other countries. Apple and the App Store are trademarks of Apple Inc., registered in the U.S. and other countries and regions. Android and Google Play are trademarks of Google LLC. All other product names, logos, and brands are property of their respective owners. Customer Assistance: www.lutron.com/RA3Support 7 +44.(0)20.7702.0657 (UK & Europe)
Need assistance or looking to source this item?