This document could not be shown here. Open the PDF.
Text of this document16 pages · 2,476 words
Page 1
product specifications 3691154f 11.03.22 HomeWorks Wired Alisse Keypad The HomeWorks wired Alisse keypad allows the user to control lights, shades / draperies, temperature, and third-party equipment. The keypad is designed to work with Lutron HomeWorks QSX series processors only through the wired QS link. Backlit buttons make it easy to find and operate the keypad in low light conditions. Keypads are available in a variety of colors and finishes, with optional text or icon engraving. Status of active button press or scene is indicated Single column 3-button keypad through intensity of backlighting which is configurable through the HomeWorks software. It can also be programmed in the HomeWorks software to adjust intensity by time of day or button presses. The Alisse base unit is designed to allow system installation without exposing the keypad to potential damage during construction. It features a single programmable pushbutton for wiring validation and basic system control. Base unit Finishes See Colors and Finishes section on page 16. Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 1 +44.(0)20.7680.4481 (Europe)
Page 2
product specifications 3691154f 11.03.22 HomeWorks Wired Alisse Keypad Specifications Power 24 – 36 V- 30 mA per base unit Typical Power Single column keypad + base = 370 mW at 24 V- Consumption Two column keypad + base = 449 mW at 24 V- Three column keypad + base = 543 mW at 24 V- Regulatory Lutron Quality Systems registered to ISO 9001:2015. cULus, CE, NOM, FCC, ICES-003, and Approvals RoHS Compliant Environment Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% non-condensing relative humidity. Indoor use only. Communications SELV / PELV / NEC® Class 2 wiring connects keypads to other devices on the QS link. Each base unit counts as 1 device on the QS link. Each base unit consumes 1 Power Draw Unit (PDU) on the QS link. For complete information, see “Power Draw Units on the QS link” (Lutron P/N 369405) at www.lutron.com ADA Standard Control operation complies with ADA standards for an accessible design. ESD Protection Meets IEC 801-2. Tested to withstand 15 kV electrostatic discharge without damage or memory loss. Power Failure Power failure memory: should power be interrupted, the keypad will return to its previous state when power is restored. Mounting Typical square style backbox dimensions: 3 in H x 3 in W x 1.4 in D (75 mm H × 75 mm W × 35 mm D) Typical round style backbox dimensions: 2.7 in W x 1.4 in D (68 mm W × 35 mm D) See Mounting on page 13 for more details. Wiring SELV / PELV / NEC® Class 2 2 Terminals Each terminal accepts up to two 18 AWG (1.0 mm ) wires Warranty http://www.lutron.com/TechnicalDocumentLibrary/043492.pdf https://www.lutron.com/TechnicalDocumentLibrary/Intl_Warranty.pdf Design Features • Backlight color temperature chosen based on the customer-selected faceplate finish. Faceplate Aged Aged Brushed Satin Bright Graphite Champagne Snow Matte Architectural Brilliant Finish Brass Bronze Brass Nickel Chrome (GP) (CP) White Black White White (AB) (AZ) (BRB) (SN) (BC) (SWH) (BL) (AWH) (BWH) Backlight 1 1 1 2 2 2 1 2 2 2 2 Color Warm Warm Warm Cool Cool Cool Warm Cool Cool Cool Cool Temp. 1 2700 K color temperature 2 4000 K color temperature • Adjustable back-light intensity. Contact Closure Input (CCI) • Faceplate snaps on with no visible means of • Base unit contains two non-isolated contact attachment. closure inputs (CCIs) for integration with a • Optional custom text or icon engraving. contact closure device. • IP20 Rating. • The CCI can be set up to simulate existing Lutron keypad functionality or it can be custom-configured to meet project-specific requirements. • Provides a one-way interface between the Lutron lighting system and a contact closure device (not supplied). Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 2 +44.(0)20.7680.4481 (Europe)
Page 3
product specifications 3691154f 11.03.22 HomeWorks Wired Alisse Keypad Dimensions Square Style Measurements shown as: in (mm) Single column with base unit Front View Side View 0.1250.125 (3.0)(3.0) 3.553.55 2.042.04 (90.2)(90.2) (51.7)(51.7) 1.141.14 (29.0)(29.0) 3.553.55 (90.2)(90.2) Two column with base unit Front View Side View 0.1250.125 (3.0)(3.0) 3.553.55 2.042.04 (90.2)(90.2) (51.7)(51.7) 1.141.14 (29.0)(29.0) 3.553.55 (90.2)(90.2) Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 3 +44.(0)20.7680.4481 (Europe)
Page 4
product specifications 3691154f 11.03.22 HomeWorks Wired Alisse Keypad Dimensions (continued) Square Style (continued) Measurements shown as: in (mm) Three column with base unit Front View Side View 0.1250.125 (3.0)(3.0) 3.553.55 2.042.04 (90.2)(90.2) (51.7)(51.7) 1.141.14 (29.0)(29.0) 4.824.82 (122.4)(122.4) Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 4 +44.(0)20.7680.4481 (Europe)
Page 5
product specifications 3691154f 11.03.22 HomeWorks Wired Alisse Keypad Flush Mounting Square Style Round Style FacelateFacelate WWallall WWallall AA ** FacelateFacelate Note: A square, flangeless backbox (Lutron P/N EBB-1-SQ or similar style) is recommended for the most flush installation possible. Flanged square or round backboxes may also be used for retrofit applications or to meet local standards. Square backboxes with no flanges must be installed with the box sides at a minimum depth of flush and maximum depth of ¾ in (19 mm) from the wall surface for best possible installation. * Flushness to Wall # of Columns (Round Box Only) Dimension A (Flushness to wall) 1 0.035 in (0.9 mm) 2 0.035 in (0.9 mm) 3 0.040 in (1.0 mm) Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 5 +44.(0)20.7680.4481 (Europe)
Page 6
product specifications 3691154f 11.03.22 HomeWorks Wired Alisse Keypad Keypad Selection Guide Columns One Column Two Columns Three Columns Buttons Per Column One Button Two Buttons Three Buttons OR Special Configurations Final keypad configuration and selection to be completed in myProjects. Engraving to be specified in myProjects. Visit engraving.lutron.com/alisse for engraving options. (continued on next page…) Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 6 +44.(0)20.7680.4481 (Europe)
Page 7
product specifications 3691154f 11.03.22 HomeWorks Wired Alisse Keypad Keypad Selection Guide (continued) Backbox Square Backbox Round Backbox Note: Please refer to the Alisse Keypads - Round Backbox Installation Best Practices Application Note #791, (P/N 048791) at www.lutron.com to see additional installation tips and Lutron tested recommended round backboxes. Colors and Finishes AB Aged Brass CP Champagne AZ Aged Bronze SWH Snow White BRB Brushed Brass BL Matte Black SN Satin Nickel AWH Architectural White BC Bright Chrome BWH Brilliant White GP Graphite Components Keypad and Base Unit Keypad Only Keypad, Base Unit, and Backbox Final keypad configuration and selection to be completed in myProjects. Engraving to be specified in myProjects. Visit engraving.lutron.com/alisse for engraving options. Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 7 +44.(0)20.7680.4481 (Europe)
Page 8
product specifications 3691154f 11.03.22 HomeWorks Wired Alisse Keypad How to Build a Model Number Keypad Base Unit A single keypad base unit is required per keypad. Note: Adapter is included with the keypad base unit kit. HW – QS – B – System Type Device Base unit HW: HomeWorks B: Base unit Family Adapter QS: Wired QS link S1: Square backbox single & two column adapter S3: Square backbox three column adapter R1: Round backbox single & two column adapter R3: Round backbox three column adapter Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 8 +44.(0)20.7680.4481 (Europe)
Page 9
product specifications 3691154f 11.03.22 HomeWorks Wired Alisse Keypad How to Build a Model Number (continued) Replacement Adapter Kits Use replacement adapter kits to change keypad mounting for different backbox shapes or keypad columns in the field. Note: No backbox included with these adapter kits. These are replacement parts ONLY. NW – A – Family NW: Alisse wired S1 S3 Device A: Adapter Shape S1: Square backbox single & two column adapter S3: Square backbox three column adapter R1 R3 R1: Round backbox single & two column adapter R3: Round backbox three column adapter Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 9 +44.(0)20.7680.4481 (Europe)
Page 10
product specifications 3691154f 11.03.22 HomeWorks Wired Alisse Keypad Engraving Options The Alisse keypad has engraving options ideal for many scenarios. The following information will help you determine which engraving option is best-suited to your needs. Predefined Custom Engraving Engraving to be specified in myProjects. Visit engraving.lutron.com/alisse for engraving options. Predefined custom engraving must be defined at time of order. Note: Keypad orders cannot be manufactured until engraving information is received. Base units are available in advance to allow for system wiring and validation. No Engraving No engraving is for instances when the customer would like to maintain the clean look of the keypad. To specify this option, leave the engraving code of the keypad model number blank. Engraving Ink Standard Every Alisse keypad finish has a specific engraving ink that is chosen to compliment the finish while also allowing the engraving to be readable. Enhanced Readability Aged Alisse keypad finishes (Bronze and Brass) offer two engraving ink options. One that provides higher contrast for “Enhanced Readability” and a “Standard” that is more subtle. The aged finish engraving ink option is chosen when configuring the product using “Backfill Contrast” in myProjects. Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 10 +44.(0)20.7680.4481 (Europe)
Page 11
product specifications 3691154f 11.03.22 HomeWorks Wired Alisse Keypad Button Configurations Single column, Single gang 1 Button 2 Button 3 Button Double column, Single gang 1 Button 2 Button 3 Button 1 Button / 3 Button / 3 Button 1 Button Triple column, Single gang 1 Button 2 Button 3 Button 1 Button / 3 Button / 3 Button / 3 Button / 3 Button 1 Button Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 11 +44.(0)20.7680.4481 (Europe)
Page 12
product specifications 3691154f 11.03.22 HomeWorks Wired Alisse Keypad QS Link Wiring • Use SELV / PELV / NEC® Class 2 wiring to • Each base unit model number counts as connect keypads to the QS link. 1 device on the QS link. 2 • Each base unit of a QS wired Alisse Keypad • Connect two 22 AWG (0.5 mm ) shielded, twisted pairs of wires to terminals 3 and 4 of consumes 1 power draw unit (PDU) on the the keypad control link connector. Shielding QS link. For complete information, see (drain) of the twisted-pair wires must be “Power Draw Units on the QS Link” connected together as shown, but do not (Lutron P/N 369405) at www.lutron.com connect the shielding to earth / ground or to • Provided (shallow) QS Connector MUST be the keypad and do not allow the shielding to used for installations with backboxes between contact the grounded backbox. 1.4 in D and 1.8 in D (35 mm D and • The total length of wire on a QS wired link is 45 mm D). It is highly recommend to use the not to exceed 2000 ft (610 m). (shallow) connector for backboxes > 1.8 in (45 mm) D to prevent interference between the connector and backbox. Note: Use appropriate wire connecting devices as specified by local codes. Note: Replacement (shallow) QS connectors are available for purchase using Link Wiring model NW-CON. Less than 500 ft (153 m) IEC PELV / SELV / NEC® Class 2 22 AWG to 18 AWG 2 2 (0.25 mm to 1.0 mm ) X MU X MU Up to 2000 ft (610 m) Drain / Shield 12 AWG 12 AWG 2 2 (2.5 mm ) (2.5 mm ) Data Link, One Shielded Twisted Pair 22 AWG to 2 18 AWG (0.25 mm to 2 1.0 mm ) 22 AWG to 18 AWG 2 2 X (0.25 mm to 1.0 mm ) MU X MU CCI Wiring • Works with SELV / PELV / NEC® Class 2 low-voltage dry contact closures. • CCIs must have an on-state saturation voltage less than 1 V at 1 mA and an off-state leakage current of less than 100 uA. Contact manufacturer of the contact closure device for details. • The signal pulse for the CCI must be greater than 40 ms. Contact manufacturer of the contact closure device for details. Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 12 +44.(0)20.7680.4481 (Europe)
Page 13
product specifications 3691154f 11.03.22 HomeWorks Wired Alisse Keypad Mounting A square, flangeless backbox (Lutron part number EBB-1-SQ or similar style) is recommended for the most flush installation possible. Flanged square backboxes may also be used for retrofit applications or to meet local standards. Square backboxes with no flanges must be installed with the box sides flush with or slightly inset to the wall surface. Square Style (Square Backbox) Round Style (Round Backbox) 1 1,2,4 Single column Single column 1,3 1,2,3,4 Two column Two column 1 Use Lutron part number EBB-1-SQ or EBB-1-RD if a backbox is needed for the project. 2 See dimensions on page 5 for typical flushness to wall. 3 The provided keypad to base unit cable should be installed prior to installing the keypad. Replacement parts available using Lutron part number NW-WIH. 4 Please refer to the Alisse Keypads - Round Backbox Installation Best Practices Application Note #791, (P/N 048791) at www.lutron.com to see additional installation tips and Lutron tested recommended round backboxes. (continued on next page…) Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 13 +44.(0)20.7680.4481 (Europe)
Page 14
product specifications 3691154f 11.03.22 HomeWorks Wired Alisse Keypad Mounting (continued) Square Style (Square Backbox) Round Style (Round Backbox) 1,3 1,2,3,4 Three column Three column 1 Use Lutron part number EBB-1-SQ or EBB-1-RD if a backbox is needed for the project. 2 See dimensions on page 5 for typical flushness to wall. 3 The provided keypad to base unit cable should be installed prior to installing the keypad. Replacement parts available using Lutron part number NW-WIH. 4 Please refer to the Alisse Keypads - Round Backbox Installation Best Practices Application Note #791, (P/N 048791) at www.lutron.com to see additional installation tips and Lutron tested recommended round backboxes. Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 14 +44.(0)20.7680.4481 (Europe)
Page 15
product specifications 3691154f 11.03.22 HomeWorks Wired Alisse Keypad Base Unit and Adapter Assembly The adapter is field-replaceable should there be a change to the number of columns at a keypad location. Replacement adapter kits are available, see page 9 for part numbers. Tools Required: Phillips head screwdriver (not included) 1. Remove the existing adapter. 2. Align new adapter over the base unit. 3. Assemble using the provided 4 (2-28 in X 0.250 in) pan head screws. Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 15 +44.(0)20.7680.4481 (Europe)
Page 16
product specifications 3691154f 11.03.22 HomeWorks Wired Alisse Keypad Colors and Finishes Aged Brass Aged Bronze Brushed Brass Satin Nickel Bright Chrome Graphite Champagne AB AZ BRB SN BC GP CP Snow White Matte Black Architectural Brilliant White SWH BL White BWH AWH • Aged Brass and Aged Bronze finishes are produced using a handcrafted process which introduces a unique variation in both the hue and the graining. There will be natural variation from unit to unit. • Due to printing limitations, colors and finishes shown cannot be guaranteed to perfectly match actual product colors. • Keychains are available for more precise color matching: - Signature Metal Chip Kit Demo: SM-CK-DEMO Lutron, HomeWorks, and Alisse are trademarks or registered trademarks of Lutron Electronics Co., Inc. in the US and/or other countries. All other product names, logos, and brands are property of their respective owners. Customer Assistance: 1.844.LUTRON1 (U.S.A. / Canada) www.lutron.com/support 16 +44.(0)20.7680.4481 (Europe)
Need assistance or looking to source this item?