This document could not be shown here. Open the PDF.
Text of this document8 pages · 2,899 words
Page 1
product specifications 3691127f 08.06.25 HomeWorks QSX Processor 1 The HomeWorks QSX processor provides control and communication to HomeWorks system components. The Ethernet links allow communication to the HomeWorks designer software, integration with third-party systems and communication between 0,28 in multiple processors. HomeWorks QSX processors may L1 L2 V+ COM COM CCI 7 mm HomeWorks QSX Processor be connected using either an Ethernet hub / switch or HQP7-2 24-36 V- 250 mA SELV NEC ® Class 2 router, or by using Ethernet directly from a PC to the lutron.com +1.844.LUTRON1 processor(s). Clear Connect - Type X Gateways cannot +44.(0)20.7702.0657 L1: 24 V- 1.0 A L2: 24 V- 1.0 A be wired directly to the Ethernet port on a HomeWorks V+ V+ 4,4 in-lb • COM MUX MUX COM MUX MUX 0,5 N m LED | DEL = = = QSX processor. See page 5 for details. All processors on a project must be connected to a single network. The HomeWorks designer software and all integration equipment must be connected to the same network as the processors. The HomeWorks QSX processor is required when using the Clear Connect - Type X Gateway for control of residential Ketra light sources. See Lutron Spec Submittal 3691128 at www.lutron.com for the complete details on Clear Connect - Type X Gateway. The processor is powered from the QSPS-DH-1-75-H power supply. Refer to the HomeWorks designer software to determine link power requirements. The QSX processor can be installed in a HQ-LV21, L-LV21, L-LV14, or PDx control panel. Processor Capabilities Each QSX processor has 1 or 2 links (depending on the model number) that can be individually configured as one of two types: • HomeWorks QS wired device link • HomeWorks Clear Connect - Type A Model Numbers 1 HQP7-1 HomeWorks QSX 1-link processor 1 HQP7-2 HomeWorks QSX 2-link processor 1,2 HQP7-MDU-1 HomeWorks QSX 1-link MDU processor 1,2 HQP7-MDU-2 HomeWorks QSX 2-link MDU processor 1 The HomeWorks QSX processor requires Lutron Designer software 16.x or greater to operate. 2 Only available for multi-dwelling unit projects. Contact your local dealer or Lutron representative for more information. Customer Assistance: www.lutron.com/support 1 1.844.LUTRON1 (U.S.A. / Canada) +44.(0)20.7680.4481 (Europe)
Page 2
product specifications 3691127f 08.06.25 HomeWorks QSX Processor Specifications Model Number HQP7-1; HQP7-2; HQP7-MDU-1; HQP7-MDU-2 Power Processor (P): 24–36 V- 250 mA Links (L1/L2): 24–36 V- 1 A per link Typical Power 4.2 W; 8 Power Draw Units (PDUs) Consumption Test conditions: Two Ethernet links connected, both device links in use Regulatory Approvals cULus Listed, FCC Part 15 Compliant, ICES-003 Compliant, NOM Certified, CE Marked, UKCA Marked, RoHS Compliant Environment Indoor use only. 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity, non-condensing Heat Generated 15 BTU/hr — typical Cooling Method Passive Cooling Power Failure System data stored in non-volatile memory. Timeclock retention for 10 years Memory Internal Timeclock ±1 minute per year Miswire Protection All terminal block inputs are over-voltage and miswire protected against wire reversals and shorts Low-Voltage Link Two pair — one pair 18 AWG (0.75 mm2), one pair 18 to 22 AWG Wire Type (0.34 to 0.75 mm2) twisted shielded — IEC PELV/ SELV / NEC® Class 2 cable Low-Voltage Power 18 AWG (0.75 mm2) Wire Type Communications Ethernet, RS485 (QS, RF) Link Capacities HomeWorks QS Wired Device Link 99 devices / 512 switch legs HomeWorks QS Wired Device (MDU models) 50 devices / 100 switch legs HomeWorks Clear Connect - Type A Link 99 devices / 100 switch legs Switch legs are the smallest controllable outputs and include dimmed or switched circuits, HomeWorks Digital or DALI addressable devices (ballasts, drivers, and interfaces), a single DMX channel, contact closure outputs, and Sivoia QS shade drives. ESD Protection Meets or exceeds the IEC 61000-4-2 standard Surge Protection Meets or exceeds ANSI/IEEE C62.41 standard Mounting Mounts in HQ-LV21, L-LV14, L-LV21, or PDx- control panel Dimensions With terminal blocks: 4.25 in (108 mm) x 3.94 in (100 mm) Without terminal blocks: 4.25 in (108 mm) x 3.54 in (90 mm) Connections 4-pin removable terminal blocks. 1 for HQP7-1, 2 for HQP7-2. One 4-pin removable terminal block* for Power Input. Two RJ45 standard Ethernet connections. *Each terminal will accept up to two 18 AWG (0.75 mm2) wires. Limited Warranty www.lutron.com/warranty or call 1.844.LUTRON1 (U.S.A./Canada) or +1.610.282.3800 (Others) for a printed copy Customer Assistance: www.lutron.com/support 2 1.844.LUTRON1 (U.S.A. / Canada) +44.(0)20.7680.4481 (Europe)
Page 3
product specifications 3691127f 08.06.25 HomeWorks QSX Processor HomeWorks QSX System Security Statement Lutron takes cybersecurity very seriously. We actively monitor the threat landscape and take a proactive approach to security and privacy, continuously working to update and enhance our systems and processes. At Lutron, we call our approach to cybersecurity “Secure Lifecycle”, and we would like to present the following steps we take to protect your security and privacy: • Security by Design. When building a new system, Lutron utilizes a dedicated security team to ensure best practices are implemented. Security is built in. It is not an afterthought or an add-on. • Third-Party Validation. Security is complicated. Lutron has a dedicated team of internal experts, but we also leverage external experts to double-check our work, and to make security recommendations. • Continuous Monitoring and Improvements. Security is a constantly moving target. Lutron uses a dedicated security team to continuously monitor for potential threats and, when needed, send out security patches to update installed systems. • Ongoing Support. Lutron has the resources you need to answer questions about security when they arise. We incorporate a variety of security features into our product designs. These features include recommendations from the National Institute of Standards and Technology (NIST) among others, and they are aimed at meeting our secure lifecycle protections. While we do not publish a comprehensive list of our security features, the following list is a small example of some of the techniques employed in our system designs for HomeWorks QSX processors, Clear Connect Gateway – Type X devices and associated services (such as mobile applications and cloud resources): 1. Secure and authenticated remote access with unique keys for every HomeWorks QSX system. 2. A secure hardware element (“chip”) on all HomeWorks QSX processors and Clear Connect Gateway – Type X to guard the keys used for secure communication and authentication. 3. Enforcing industry-standard encrypted communication and techniques for our integration protocols to the highest extent possible. Any integrated third-party components or systems should be evaluated independently. 4. Secure commissioning – all communication between the system programming software tool / app and the processors is encrypted and authenticated. Programming a system requires permission to access that system. 5. Security updates are pushed out automatically to the lighting system for urgent security patches. Lutron is committed to one year of security support from system start-up date. 6. Use of industry-standard techniques for cloud-based integrations, such as OAuth2.0. 7. Signed processor firmware to ensure a firmware update is authentically from Lutron. If you have additional questions or would like to make a vulnerability disclosure to Lutron, please contact Lutron’s 24/7 Technical support line at 1.844.LUTRON1 or email us at support@lutron.com SOC2 report available upon request. Customer Assistance: www.lutron.com/support 3 1.844.LUTRON1 (U.S.A. / Canada) +44.(0)20.7680.4481 (Europe)
Page 4
product specifications 3691127f 08.06.25 HomeWorks QSX Processor Dimensions Dimensions shown as: in (mm) Front View Side View 4.25 2.38 (108) (60.5) 0,28 in L1 L2 V+ COM COM CCI 7 mm HomeWorks QSX Processor HQP7-2 3.54 3.94 24-36 V- 250 mA SELV NEC ® Class 2 lutron.com +1.844.LUTRON1 (90) (100) +44.(0)20.7702.0657 L1: 24 V- 1.0 A L2: 24 V- 1.0 A V+ V+ 4,4 in-lb • COM MUX MUX COM MUX MUX 0,5 N m LED | DEL = = = Customer Assistance: www.lutron.com/support 4 1.844.LUTRON1 (U.S.A. / Canada) +44.(0)20.7680.4481 (Europe)
Page 5
product specifications 3691127f 08.06.25 HomeWorks QSX Processor Mounting DIN Rail Power Supply L(+) N(-) L(+) N(-) (QSPS-DH-75-H) 120 - 240 V 24 V 120 - 240 V 24 V Input / Entrada / Entrée Output / Salida / Sortie Input / Entrada / Entrée Output / Salida / Sortie QSPS-DH-1-60 QSPS-DH-1-60 22.5 - 25 V 22.5 - 25 V (4) Red Link 1 (optional) (3) Red Link 2 (optional) (2) Red +V Processor Power 0,28 in 0,28 in L1 L2 V+ COM COM CCI 7 mm L1 L2 V+ COM COM CCI 7 mm HomeWorks QSX Processor HomeWorks QSX Processor HQP7-2 HQP7-2 24-36 V- 250 mA SELV NEC ® Class 2 24-36 V- 250 mA SELV NEC ® Class 2 lutron.com +1.844.LUTRON1 lutron.com +1.844.LUTRON1 (1) Black COM (Common) +44.(0)20.7702.0657 +44.(0)20.7702.0657 L1: 24 V- 1.0 A L2: 24 V- 1.0 A L1: 24 V- 1.0 A L2: 24 V- 1.0 A V+ V+ 4,4 in-lb V+ V+ 4,4 in-lb • • COM MUX MUX COM MUX MUX 0,5 N m LED | DEL = = = COM MUX MUX COM MUX MUX 0,5 N m LED | DEL = = = 4 3 2 1 Wire Landing Boards (QS-WLB) L-LV21/HQ-LV21 0,28 in L1 L2 V+ COM COM CCI 7 mm HomeWorks QSX Processor HQP7-2 24-36 V- 250 mA SELV NEC ® Class 2 lutron.com +1.844.LUTRON1 +44.(0)20.7702.0657 L1: 24 V- 1.0 A L2: 24 V- 1.0 A V+ V+ 4,4 in-lb • COM MUX MUX COM MUX MUX 0,5 N m LED | DEL = = = L(+) N(-) 120 - 240 V 24 V Input / Entrada / Entrée Output / Salida / Sortie 22.5 - 25 V 0,28 in L1 L2 V+ COM COM CCI 7 mm HomeWorks QSX Processor HQP7-2 24-36 V- 250 mA SELV NEC ® Class 2 lutron.com +1.844.LUTRON1 +44.(0)20.7702.0657 L1: 24 V- 1.0 A L2: 24 V- 1.0 A V+ V+ 4,4 in-lb • COM MUX MUX COM MUX MUX 0,5 N m LED | DEL = = = 5 5 5 5 5 4 4 4 4 4 3 3 3 3 3 2 2 2 2 2 1 1 1 1 1 L-LV14 PDx- Control Panel Customer Assistance: www.lutron.com/support 5 1.844.LUTRON1 (U.S.A. / Canada) +44.(0)20.7680.4481 (Europe)
Page 6
L(+) N(-) L(+) N(-) 120 - 240 V 24 V 120 - 240 V 24 V Input / Entrada / Entrée Output / Salida / Sortie Input / Entrada / Entrée Output / Salida / Sortie QSPS-DH-1-60 QSPS-DH-1-60 22.5 - 25 V 22.5 - 25 V 7 mm 7 mm 1 2 0,28 in 1 2 0,28 in L L +24 COM COM CCI L L +24 COM COM CCI L1 L2 L1 L2 V+ V+ m• 0,5 N = = x R x T = DEL | LED V+ V+ m• 0,5 N = = x R x T = DEL | LED COM MUX MUX COM MUX MUX 4,4 in-lb COM MUX MUX COM MUX MUX 4,4 in-lb 7 mm 7 mm 0,28 in 1 2 +24 COM CCI 0,28 in L L COM L1 L2 0,5 N = = x R x T = DEL | LED V+ V+ m• 0,5 N = = x R x T = DEL | LED 4,4 in-lb COM MUX MUX COM MUX MUX 4,4 in-lb L(+) N(-) L(+) N(-) 120 - 240 V 24 V 120 - 240 V 24 V Input / Entrada / Entrée Output / Salida / Sortie Input / Entrada / Entrée Output / Salida / Sortie QSPS-DH-1-60 QSPS-DH-1-60 22.5 - 25 V 22.5 - 25 V product specifications 3691127f 08.06.25 4 M M 7 mm 4 M M 7 mm L1 L2 +2 CO CO CCI 0,28 in L1 L2 +2 CO CO CCI 0,28 in L1 L2 M V+ X X M V+ X X m• N 0,5 = x R x T == DEL| = x R x T == DEL| CO MU MU CO MU MU b 4,4 in-l HomeWorks QSX Processor Wiring Diagrams—Networking 7 4 M M 7 mm 0, L1 L2 +2 CO CO CCI 0,28 in Connection using an Ethernet hub/switch/router L1 L2 0 = x R x T == EL |D LED M V+ M V+ m• N 0,5 = x R x T == L DE D| LE 4 CO MUX MUX CO MUX MUX b 4,4 in-l Ethernet Router Ethernet cable: Cat5e (minimum) 328 ft (100 m) maximum Maximum of 5 processors can be daisy chained together. 0,28 in 0,28 in L1 L2 V+ COM COM CCI 7 mm L1 L2 V+ COM COM CCI 7 mm HomeWorks QSX Processor HomeWorks QSX Processor HQP7-2 HQP7-2 24-36 V- 250 mA SELV NEC ® Class 2 24-36 V- 250 mA SELV NEC ® Class 2 lutron.com +1.844.LUTRON1 lutron.com +1.844.LUTRON1 +44.(0)20.7702.0657 +44.(0)20.7702.0657 L1: 24 V- 1.0 A L2: 24 V- 1.0 A L1: 24 V- 1.0 A L2: 24 V- 1.0 A V+ V+ 4,4 in-lb V+ V+ 4,4 in-lb • • COM MUX MUX COM MUX MUX 0,5 N m LED | DEL = = = COM MUX MUX COM MUX MUX 0,5 N m LED | DEL = = = HomeWorks QSX HomeWorks QSX Processor HQP7-2 Processor HQP7-2 Ethernet Router Ethernet cable: Cat5e (minimum) 328 ft (100 m) maximum IEEE 802.3af-2003 or HomeWorks Clear M M I 0,28 in M M I 0,28 in 802.3at-2009 compliant L1 L2 V+ CO CO CC 7 mm L1 L2 V+ CO CO CC 7 mm HomeWorks QSX Processor HomeWorks QSX Processor Connect - Type X HQP7-2 HQP7-2 PoE Injector/supply 24-36 V- 250 mA SELV NEC® Class 2 24-36 V- 250 mA SELV NEC® Class 2 lutron.com +1.844.LUTRON1 lutron.com +1.844.LUTRON1 +44.(0)20.7702.0657 +44.(0)20.7702.0657 by others. Gateway HQP7-RF L1: 24 V- 1.0 A L2: 24 V- 1.0 A L1: 24 V- 1.0 A L2: 24 V- 1.0 A M V+ X X M V+ X X 4,4 in-lb M V+ X X M V+ X X 4,4 in-lb • • CO MU MU CO MU MU 0,5 N m LED|DEL === CO MU MU CO MU MU 0,5 N m LED|DEL === HomeWorks QSX HomeWorks QSX Maximum of 5 devices can be Processor HQP7-2 Processor HQP7-2 daisy chained together. Customer Assistance: www.lutron.com/support 6 1.844.LUTRON1 (U.S.A. / Canada) +44.(0)20.7680.4481 (Europe)
Page 7
product specifications 3691127f 08.06.25 HomeWorks QSX Processor Wiring Diagrams—HomeWorks Clear Connect - Type A HomeWorks QSX Processor HomeWorks Clear Connect - HomeWorks QS Hybrid Repeater HomeWorks HQP7-2 Type A Device HomeWorks Clear Connect - Clear Connect - Type A Device Type A Device 30 ft (9 m) maximum 0,28 in L1 L2 V+ COM COM CCI 7 mm HomeWorks QSX Processor HQP7-2 24-36 V- 250 mA SELV NEC ® Class 2 Hybrid Repeater lutron.com +1.844.LUTRON1 Hybrid Repeater Hybrid Repeater Hybrid Repeater +44.(0)20.7702.0657 L1: 24 V- 1.0 A L2: 24 V- 1.0 A V+ V+ 4,4 in-lb Repeater Status Repeater Status Repeater Status • P 1 2 3 4 P 1 2 3 4 P 1 2 3 4 COM MUX MUX COM MUX MUX 0,5 N m LED | DEL = = = Communication Communication Communication RF Wired RF Wired RF Wired Setup Test Activate Setup Test Activate Setup Test Activate Test Add Test Add Test Add Power Repeater Link Power Repeater Link Power Repeater Link C 24 VMUXMUX C 24 VMUXMUX C 24 VMUXMUX 9 V OM 9 V OM 9 V OM 1 2 3 4 1 2 3 4 1 2 3 4 30 ft (9 m) 30 ft (9 m) maximum maximum HomeWorks Clear Connect - HomeWorks Clear Connect - Type A Link* Type A Link* 60 ft (18 m) maximum 1,000 ft (305 m) maximum wire length per run 1,000 ft (305 m) maximum wire length per run * HomeWorks Hybrid Repeaters can be powered from the Processor link or a wall-mount transformer. If powering from a wall-mount transformer, Pin 2 does not get connected. Wiring Diagrams—QS Wired Device Link L(+) N(-) 120 - 240 V 24 V Input / Entrada / Entrée Output / Salida / Sortie QSPS-DH-1-60 22.5 - 25 V M M 0,28 in L1 L2 V+ CO CO CCI 7 mm HomeWorks QSX Processor HQP7-2 24-36 V- 250 mA SELV NE C® Class 2 lutron.com +1.844.LUTRON1 +44.(0)20.7702.0657 L1: 24 V- 1.0 A L2: 24 V- 1.0 A M V+ X X M V+ X X 4,4 in-lb CO MU MU CO MU MU 0,5 N•m LED | DEL === QS Link up to 99 device addresses QS Link up to 99 device addresses Maximum 1 A current draw per link when powering both links from the same power supply. Customer Assistance: www.lutron.com/support 7 1.844.LUTRON1 (U.S.A. / Canada) +44.(0)20.7680.4481 (Europe)
Page 8
product specifications 3691127f 08.06.25 HomeWorks QSX Processor Wiring Diagrams—QS Wired Device Link with Shades / Draperies (Controllable Window Solutions) L(+) N(-) 120 - 240 V 24 V Input / Entrada / Entrée Output / Salida / Sortie QSPS-DH-1-60 22.5 - 25 V Ratings: 1 2 3 4 24 V- 1 A (4) _ 120 V~ 60 Hz 0,28 in L1 L2 V+ COM COM CCI 7 mm HomeWorks QSX Processor HQP7-2 (3) MUX 24-36 V- 250 mA SELV NEC ® Class 2 lutron.com +1.844.LUTRON1 +44.(0)20.7702.0657 L1: 24 V- 1.0 A L2: 24 V- 1.0 A V+ V+ 4,4 in-lb • COM MUX MUX COM MUX MUX 0,5 N m LED | DEL = = = (2) 24 V- (1) COM QS Link HomeWorks QS wired devices QSPS-10PNL QS Smart Power Panel HomeWorks QS wired devices Lutron, Clear Connect, HomeWorks, Maestro, and any related trade dress and logos are trademarks or registered trademarks of Lutron Electronics Co., Inc. in the US and / or other countries. All other product names, logos, and brands are property of their respective owners. Customer Assistance: wwwwww.lutr.lutron.com/supporton.com 88 1.844.LUTRON1 (U.S.A. / Canada) +44.(0)20.7680.4481 (Europe)
Need assistance or looking to source this item?