This document could not be shown here. Open the PDF.
Text of this document3 pages · 785 words
Page 1
European Style Wallstations ® egrx-4 12.9.03 Color and Finish Codes EGRX-8S-__-__ Description 8-Scene with Off and Raise/Lower • Used to select and adjust scenes in Wallstation GRAFIK Eye Control Units. • Scene selection functionality can be selected in the field. Status LEDs • Status LEDs indicate which scene is selected. • Off button turns all lights off. • Master raise/lower brightens or dims all lighting in the selected scene. Scene • Works with GRAFIK Eye 3000 and Selection 4000 Series Control Units. Buttons • Selects scenes in just one Control Unit or a group of up to eight Control Units. Off • Mounts in UK/German wallbox. In the U.S., Lutron supplies a UK wallbox Master (P/N 241-683) with the Wallstation. Raise/Lower Finish and Engraving Options Available with engraving to meet specific project needs. Field Selected Functionality DIP Switch Settings Scene selection buttons 5 6 activate: Scenes 1 to 8 Scenes 5 to 12 Scenes 9 to 16 Scenes 13 to 16/1 to 4 DIP Switches 7-10 are set at the factory. Do not change these switches. 1 R SPECIFICATION SUBMITTAL Page Job Name: Model Numbers: Job Number:
Page 2
European Style Wallstations ® egrx-10 12.9.03 Specifications Power Color and Finish Codes Dimensions Low-voltage Type Class 2 (PELV). Standard Finishes Front View Operating voltage: 12/24 V Direct Current Ship in 48 hours* Black BL Key Design Features White WH • Meets IEC 801-2. Tested to withstand 15kV Bright Brass BB Bright Chrome BC electro-static discharge without damage or Satin Brass SB memory loss. Satin Chrome SC • Faceplate snaps on with no visible means of Matte Finishes attachment. Ship in 3 to 4 weeks Ivory IV System Communications and Capacity Beige BE • Low-voltage Type Class 2 (PELV) wiring Gray GR Brown BR 86mm (3.38”) connects Wallstations to Control Units and Metal Finishes Control Interfaces. Ship in 4 to 6 weeks • Up to 8 Control Units and up to 16 total Bright Nickel BN Side View Wallstations and/or Control Interfaces may Satin Nickel SN be linked for a total of 24 control points. Antique Brass QB Antique Bronze QZ Terminals Anodized Aluminum Finishes 2 Ship in 4 to 6 weeks Accept up to two 1.0mm (#18 AWG) wires Clear CLA 86mm typical. Black BLA (3 3/8”) Environment Brass BRA Engraving E 0-40°C (32-104°F). Relative humidity less Wallbox Included NA than 90% non-condensing. Also available: -Custom Controls 6mm 25mm -Color matching (1/4”) (1”) Ship in 4 to 6 weeks. Pricing may vary depending on finish. * 48 hours for 4S, 2B-SL, 4SIR- Back View 8S, 8S-IR. All others – 2 weeks. Mounting 1.4" (35mm) 2.4" (60mm) Terminals for PELV (Class 2) Wiring 56 1234 UKor German wallbox. DIP Shipped with Wallstation in US (P/N 241-683) Switches Faceplate 2 R SPECIFICATION SUBMITTAL Page Job Name: Model Numbers: Job Number:
Page 3
European Style Wallstations ® egrx-11 12.9.03 Wallstation Installation DIP Switches Low-Voltage Class 2 (PELV) Wiring • Set DIP switches 1-4 to give the Wallstation • Use low-voltage Class 2 (PELV) wiring to daisy-chain a unique system address from 1 to 16. Wallstations to Control Units and other components. • Set additional DIP switches (if any) to specify • Make connections inside the wallbox or in a function as shown on the first page of the switch/junction box with a maximum wire length of 8 Wallstation’s Specification Submittal. feet (2.5m) from the link to the Wallstation. Note: EGRX Wallstations have a “D” terminal for Drain. Connect the Drain/Shield at this terminal. DIP Switch Settings Address 1234 When used with GRAFIK Eye 3000 Control Units: 2 1 • Two #18 AWG (1.0mm ) conductors for common (terminal 1) and 12 V Direct Current (terminal 2). Ensure 2 that the terminal 2 connection is wired correctly. Refer 3 to GRAFIK Eye 3000 Series Specification Submittal. 2 4 • One shielded, twisted pair #18 AWG (1.0mm ) for data link (terminals 3 and 4). 5 6 When used with GRAFIK Eye 4000 Control Units: 2 • Two #12 AWG (2.5mm ) conductors for common 7 (terminal 1) and 24 V Direct Current (terminal 2). These 8 won’t fit in terminals. Connect as shown. 2 9 • One shielded, twisted pair #18 AWG (1.0mm ) for data link (terminals 3 and 4). 10 • Connect Drain/Shield as shown. Do not connect to 11 Ground (Earth). Connect the bare drain wires and cut 12 off the outside shield. 13 14 15 16 D321 Reserved for GRX-PRG, if present on link. Drain/Shield 4 2 #18 AWG (1.0 mm ) 2 2 # 18 AWG (1.0 mm ) twisted, shielded pair from terminals 3 to 3 and 4 to 4 2 2 #12 AWG (2.5 mm ) 3 R SPECIFICATION SUBMITTAL Page Job Name: Model Numbers: Job Number:
Need assistance or looking to source this item?