This document could not be shown here. Open the PDF.
Text of this document20 pages · 8,325 words
Page 1
3 0 0 0 / 4 0 0 0 S E R I E S ® S P E C I F IC AT I O N GUIDE
Page 2
S P E C I F I C A T I O N G U I D E T A B L E O F C O N T E N T S 2 - 3 General Specifications/Sources/ 1 1 S of t w a r e Scenes/Zones GRAFIK Eye 3000 Series 4 - 5 P reset Dimming Con t rol Dia g ra m 1 2 - 1 3 Accessory Cont ro l s Mo del Specific a t io ns 6 - 7 GRAFIK Eye 4000 Series 1 4 - 1 5 D i me ns io ns / Mo u nt i n g P reset Dimming Cont rol Dia g ra m 8 - 9 D i m m i n g Pa ne l 1 6 - 1 7 D i m m i n g System Specifi c a t io ns Mo del Specific a t io ns 1 0 GRAFIK Eye 3500/4500 M o de l s 1 8 - 1 9 C o l o r s , Finishe s, Orde r i ng I n fo r ma t i on and Wa r ra nt y GRAFIK Eye® p reset dimming cont rols inc rease the func t io na l i t y, GRAFIK Eye f l exibility and beauty of any space, from the simplest r e s ide nt ial ® applications to the most complex commercial application s. O ne standa rd pro duct family handles virtually any job. GRAFIK Eye 3000 Series controls operate via integral dimmers for resi dential and smaller commercial application s. GRAFIK Eye 4000 Series controls are used with separate Dimming Panels for high performance architectural application s. Both specification grad e, GRAFIK Eye 3000 & 4000 Series controls offer General Specifications consistent, convenient lighting scene recall at the touch of a button. Fade Times: Lutron offers a choice of GRAFIK Eye Models to control 2 to 64 Adjustable for each scene from z o nes of lig ht i ng along with Accessory Con t rols to ex p a nd the system’s immediate to 60 minutes . capabilities for such f u nc t io ns as lig ht sequenc i ng , lockout features Power Failure Memory: and much more. Consult your Lutron representative for the righ t Lights automatically return to GRAFIK Eye lighting control solution for your needs . prior levels; scenes and fade times are saved. Input Power: 50/60 Hz from conventional S O U R C E S Incandescent/Tungsten utility distribution systems or from a generator-based system. Energy Management / Savings: Electronic Transformer GRAFIK Eye lighting controls offer Neon/Cold-Cathode Low Voltage longer bulb life for incan descent sources, energy savings an d increased productivity. Integration: T-12, T-8, Magnetic Transformer T-5, plus T-4 Compact Low Voltage Interfaces are available for seamless Fluorescent i nt e g ra t i on with aud io / v i s ual, security a nd other equipme nt. Visit the Lutro n GRAFIK Eye controls work with above sources for int e nsity changes (either directly or thr o u g h website, www.lutron.com, for de t a i l e d i nt e r faces) that are sm o o t h a nd cont i nuo u s. GRAFIK Eye Dimmers are electr o n ically assig ned to application notes. t he appro p r iate load types/dimming curve (in c l ud i ng non-dim) and can be r e a s s ig ned at any time. Contact Lutron for information on other lighting sources . 2 www.lutron.com
Page 3
G R A F I K E y e Fade Time Buttons P R E S E T L I G H T I N G C O N T R O L Zone Intensity Button s Temporary Change Button GRAFIK Eye controls allow the user to Scene Select Button s create and recall custom preset scenes for common room activities. Scenes are set by adjusting the lighting zones Optional Infrared Wireless (a light or group of lights controlled Remote Control Built-in Infrared Receiver together within a room or space) to create the perfect combination for * Model GRX-3104-T-WH shown above . any activity. Switch between scenes at the touch of a button. S C E N E S Z O N E S 1. Set Up Lights are on for room set up before use. Table, perimeter an d accent lighting are all preset a t 90 perc e nt for ma x i mum v ie w i ng 50% a nd ene rgy saving s. Podium lig ht s a re of f . 0% PODIUM TABLE PERIMETER ACCENT 2. General Meeting Once participants are assembled , this general meeting settin g highlights the working area with table lig ht i ng at 80 perc e nt and 50% accent lights set at 60 percen t while podium and perimeter lights are completely off. 0% PODIUM TABLE PERIMETER ACCENT 3. A/V Presentation For A/V presentation s, this setting allows the room to be darkened without sacrificing work lightin g at the table. Podium lighting is 50% at 80 percent, table lighting is at 60 percent, perimeter lighting is at 20 percent while accent lighting is off to darken the backgroun d. 0% PODIUM TABLE PERIMETER ACCENT 4. Unoccupied/Night light L ig hts are set at low levels when room is not in use. Podium, table and a c c e nt lig hts are all off, with perim e t e r lighting set at 50 percent. 50% Photo location: Executive Board Room, 0% Manulife Financial, Toronto, Ontari o PODIUM TABLE PERIMETER ACCENT 3
Page 4
GRAFIK Eye 3 0 0 0 S E R I E S M U LT I - S C E N E ® PRESET DIMMING CONTROLS Models 3100 & 3500 for resi dential and smaller commercial applications have integral power dimmers with line voltage outputs . 3000 Series—Specification Grade 4 Scenes and 2, 3, 4, or 6 Zones, expandable to 16 scenes and 48 zones. • Can link up to 8 GRAFIK Eye Control Units (8 ad dresses) for up to 48 zones • Up to 16 Accessory Controls for total of 24 control points • Built-in Infrared Receiver/ O p t io nal Infra red Wireless Remote Con t ro l • Can inc rease ind i v idual zone capacities to 30,000 W/VA at 120V/277V (For detailed info r ma t ion, see page 13.) GRX-ELVI n Power Interfaces are necessary for Fluorescen t (GRX-FDBI) and Electronic Low Voltage (GRX-ELVI). Power Interfaces are not required with HP 2•4•6 Dimming Module . GRX-FDBI (For detailed Power Interface information, see page 13.) or GRX-TVI s GRX-TVI– Provides a 0-10V output that conforms to BSI 929. Can be used to switch all lighting loads, including metal n n halide and electronic ballasts. If switching other non- s s lighting loads, use a relay by others . Note: System requires interface at 230V . Low Vo l t a ge Low Vo l t a ge Class 2 Wiring Class 2 Wiring ( S E LV ) ( S E LV ) Accessory Controls- Interface Accessories- A full line of wallstation Provide inputs and outputs controls (up to 16 per system) for seamless integration with Model shown: GRX-3106-T-WH available to expand system a dd i t io nal equipme nt (For mo re capabilities (For more detailed detailed info r ma t ion, information, see page 12.) (1) see page 13.) Power In Line Voltage (1) Use of mo re than 3 Accessory Con t rols and Low Vo l t a ge Int e r face Ac c e s s o r ies per GRAFIK Eye 3000 Series Con t rol Unit re q u i res add i t ion of Part No. GRX-12VDC Class 2 tr a ns fo r mer (120V AC: 12 VDC). Consult factory for 220-240V appli c a t io ns. GRAFIK Eye TOTAL WATTS/VA Models 3100 & 3500 GRAFIK EYE NO. OF WALLBOX 120V 100V 220-240V 230V CE MODEL NO. ZONES SIZE* (-JA) (-AU) (-CE) C o n t rol Unit Specifications GRX-3102- 2 Gang†† 2 1200 1000 1600 1600† GRX-3502- (2) SB-1G GRX-3103- 3 Gang†† 3 1500 1250 2400 2300† * Mo u nt in standa rd multiple gang wallbox, GRX-3503- (3) SB-1G 2.75" deep minimum, 3.5" deep r e c o m me n de d. * Available from Lutron as Part No. listed. GRX-3104- 4 Gang † (1) No. SB-4G re q u i re d. 4 2000 1600 3000 2300 †† CE re q u i res SB-4G (4 gang) wallbo x . GRX-3504- (1) SB-4G Note: To build a complete M o del No., GRX-3106- 6 4 Gang 2000 1600 3000 2300 see page 18. GRX-3506- (1) SB-4G 4 www.lutron.com
Page 5
Global Product Offerings Note: GRAFIK Eye Control Units have both a maximum capacity limit per zone an d Volts Zone Capacity a maximum capacity limit per unit. Each zone cannot exceed the total Watts/VA in th e 120V 6.7A/800WA chart at left, and each unit cannot exceed the total Watts/VA outlined in the chart 100V 6.0A/600W/VA on page 4. However, the maximum unit capacity can be allocated among each indivi dual 220-240V 5.0A/1200W/VA zone in the unit. For e xample, on a 3-zone unit at 120V with a maximum zone capacity 230V 3.4A/800W/VA of 800W and a maximum unit capacity of 1500W, some zones will not reach the indivi dual zone maximum because the total unit maximum cannot e xceed 1500W. Check total unit maximums before or dering Model Nos. S Y S T E M W I R I N G Diagram at right illustrates basi c system wiring for GRAFIK Eye 3000 ZONE/LOAD 1 Series Control Units . Note: For wiring multiple Control ZONE/LOAD 2 Units, Interfaces, and Accessory ZONE/LOAD 3 Controls, system wiring should be: 1 #12 (1.5mm 2) TYP. Low Voltage Class 2 (SELV) 4-wire daisy 2 LIVE/HOT chain of two No. 18 ( 1 . 0 m m ) twisted NEUTRAL pairs (4 wire s ) ; two Belden 9740, or one POWER Liberty LU02PSH18EX-GRN. For com plete NEUTRAL 1 #12 (1.5mm 2) TYP. system wiring inf o r ma t ion, see 3000 S e r ies Installer’s Guide, P/N 032-042. TO TO DISTRIBUTION DISTRIBUTION PANEL PANEL For CE Wiring, consult factory . P O W E R B O O S T E R A N D I N T E R F A C E W I R I N G For GRAFIK Eye 3000 Series controls only, Lutron Power Boosters can be added to increase zone capacities . Consult factory for other load types (e.g. HID). (For 120V, Power Interfaces • • LIVE/HOT 2 (POWER) ZONE/LOAD 1 are not re q u i red with HP 2 4 6 D i m m i n g Mo du l e. ) TO ZONE/LOAD 1 (SIGNAL) DISTRIBUTION NEUTRAL PANEL NGRX-PB For other Interface Wirin g ZONE/LOAD 2 i n fo r ma t i on, consult ins t a l l a t io n 1 #12 (1.5mm 2) TYP. i n fo r ma t i on shipped with pr o duc t . LIVE/HOT POWER NEUTRAL NEUTRAL 1 #12 (1.5mm 2) TYP. TO TO DISTRIBUTION DISTRIBUTION PANEL PANEL 5
Page 6
GRAFIK Eye 4 0 0 0 S E R I E S A R C H I T E C T U R A L ® L I GHTING SY S T E M S Models 4100 & 4500 combine with GRAFIK Eye Dimming Panels for higher performance architectural control application s. 4000 Series—Specification Grade System Wiring: 4 Scenes and 2, 3, 4, 6, 8, 16 or 24 Zones: expandable to 16 scenes Low Voltage Class 2 (SELV) 4-wire daisy and 64 zones. chain of two No. 12 (4.0mm 2) wires and one No. 18 (1.0mm 2) twisted shielded pair • Can link up to 8 GRAFIK Eye Control Units (8 ad dresses) for up to 64 zones (Beldon 9461, Alpha 2211) 2000 ft. (610 m) • Use with GRAFIK Eye Dimming or Switching P a nels maximum. Available in one cable (Liberty LUCOM 12/22-RBL). For complete system (32 pane l s, 768 circuits ma x i mu m ) wiring information, see 4000 Series • Up to 16 Accessory Controls for total of 24 control points Installer’s Guide, P/N 032-036. • Built-in Infrared Receiver/Optional Infrared Wireless Remote Control Note: For CE Wiring, consult factory . To Sources Low Vo l t a ge Low Vo l t a ge Class 2 Wiring Class 2 Wiring ( S E LV ) ( S E LV ) L i ne Vo l t a ge To Dimming/Switching Panels Model shown: GRX-4124-T-WH Low Vo l t a ge Accessory Controls- Interface Accessories- Class 2 Wiring A full line of wallstation Provide inputs and outputs ( S E LV ) controls (up to 16 per system) for seamless integration with available to expand system a dd i t io nal equipme nt (For mo re capabilities (For more detailed detailed info r ma t ion, information, see page 12.) see page 13.) GRAFIK Eye GRAFIK EYE NO. OF WALLBOX Models 4100 & 4500 MODEL NO. ZONES SIZE* C o n t rol Unit GRX-4102- 2 2 GANG (2) SB-1G S p e c i f i c a t i o n s GRX-4502- GRX-4103- 3 3 GANG (3) SB-1G GRX-4503- GRX-4104- 4 4 GANG (1) SB-4G GRX-4504- GRX-4106- 6 4 GANG (1) SB-4G GRX-4506- * Mo u nt in standa rd multiple gang wallbox, GRX-4108- 2.75" deep minimum, 3.5" deep r e c o m me nde d. 8 4 GANG (1) SB-4G * Available from Lutron as Part No. listed. GRX-4508- † 4116/4516 re q u i res 2 addre s s e s. †† 4124/4524 re q u i res 3 addre s s e s. GRX-4116-† 16 4 GANG (1) SB-4G GRX-4516- Note: To build a complete M o del No., GRX-4124-† † see page 18. GRX-4524- 24 4 GANG (1) SB-4G 6 www.lutron.com
Page 7
D I M M I N G P A N E L S Lutron Dimming Panels are used with GRAFIK Eye 4000 Series controls for architectural lighting control of premiere spaces and complete buildings . • Prewired. Panels are prewired and ready for installation. Dimmer modules are plug-in design, 20A per circuit (16A contin uous), 120-277 VAC, 50/60 Hz, and compensate for line voltage chan ges. Note: 100 VAC available for Japan. • Normal/Emergency. All Panels have an internal switch for normal or normal/emergency (non-essential or essential) power operation. • No Ventilation Fans. Unique ribbed base con ducts heat out of panel via convection cooling. • Quick Shipment. Panels are pre-e ng i ne e red for quick shipm e nt. Pa nels can be surface- or flush-mounted (GP Panel is surface-mount only). • Premium Temperature Margins. Panels operate at a minimum of 20 degrees Celsius below the power con ducting component temperature rating. Electroni c components live twice as long for every 10 degrees Celsius below the rating at which they operate both increasing semicon ductor reliability and ensurin g the system’s design life span. Heat Sink Base– Filter Chokes– eliminates fans minimize RFI and EMI Circuit Breakers– prewired to dimmers Circuit Selector– pushbutton setup Dimmers– 16A continuous operation Dimmers: • Handles all GRAFIK Eye lighting sources • Automatically sets Square Law dimmin g Circuit Selector: curves for smooth, linear control when load Fast Easy Pushbutton Setup types are selected (at circuit selector) • High-end trim easily adjusted to exten d • Assigns load types to circuits Incandescent/Tungsten and Low Voltage lamp • Assigns circuits to zones life, and for energy savings • Simplifies system setup • Employs plug-in design, 20A per circuit • Makes field changes easy (16A continuous), 100-277 VAC, 50/60 Hz, and compensates for line voltage chan ges • Flashes individual circuits for visual identification 7
Page 8
GRAFIK Eye 4 0 0 0 S E R I E S D I M M I N G / S W I TC H I N G ® PANEL INFORMAT IO N G P D I M M I N G P A N E L S L P D I M M I N G P A N E L S Main Lugs Only (ML) Branch Branch Model No. of Feed Main Breaker (M) Circuit Breaker No. of 120/208V Main Circuit Breaker Prefix Circuits Voltage Type* Isolator Switch (IS) Capacity (Amps) Model Dimmer No.of 3φ, 4 Wir e Lugs Only Capacity Prefix Modules Switch Legs Voltage Feed (ML) (Amps) 120–127 VOLTS 120-127 VOLTS GP 3- 120 4 M- 20 LP 1/ 4- 120 2 M- 20 GP 3- 120 4 M- 15 LP 1/ 4 120 2 M- 15 GP 4- 120 FT ML- — LP 2/ 8- 120 3 M- 20 GP 8- 120 2 ML- 20 LP 2/ 8- 120 3 M- 15 GP 8- 120 2 ML- 15 LP 3/ 12- 120 4 M- 20 GP 8- 120 3 ML- 20 LP 3/ 12- 120 4 M- 15 GP 8- 120 3 ML- 15 LP 4/ 16- 120 4 ML- 20 GP 8- 120 4 ML- 20 LP 4/ 16- 120 4 ML- 15 GP 8- 120 4 ML- 15 LP 5/ 20- 120 4 ML- 20 GP 12- 120 3 ML- 20 LP 5/ 20- 120 4 ML- 15 GP 12- 120 3 ML- 15 LP 6/ 24- 120 4 ML- 20 GP 12- 120 4 ML- 20 LP 6/ 24- 120 4 ML- 15 GP 12- 120 4 ML- 15 LP 7/ 28- 120 4 ML- 20 GP 16- 120 4 ML- 20 LP 7/ 28- 120 4 ML- 15 GP 16- 120 4 ML- 15 LP 8/ 32- 120 4 ML- 20 GP 16- 120 4 M125- 20 LP 8/ 32- 120 4 ML- 15 GP 16- 120 4 M100- 15 GP 20- 120 4 ML- 20 230 VOLTS GP 20- 120 4 ML- 15 LP 1/ 4- 230 2 M- 16† GP 24- 120 4 ML- 20 LP 2/ 8- 230 2 M- 16† GP 24- 120 4 ML- 15 LP 3/ 12- 230 4 M- 16† GP 24- 120 4 M175- 20 LP 4/ 16- 230 4 ML- 16† GP 24- 120 4 M125- 15 LP 5/ 20 230 4 ML- 16† GP 72- 120 4 ML- 20 LP 6/ 24 230 4 ML- 16† GP 72- 120 4 ML- 15 LP 7/ 28 230 4 ML- 16† 220–240 VOLTS LP 8/ 32 230 4 ML- 16† GP 3- 230 4 M- 10CE † 240 VOLTS GP 4- 230 FT ML- CE† GP 8- 230 2 IS- 10CE† LP 1/ 4 240 2 M- 16 GP 8- 230 4 IS- 10CE † LP 2/ 8 240 2 M- 16 GP 12- 230 4 IS- 10CE † LP 3/ 12 240 4 M- 16 GP 16- 230 4 IS- 10CE † LP 4/ 16 240 4 ML- 16 GP 20- 230 4 IS- 10CE † LP 5/ 20 240 4 ML- 16 GP 24- 230 4 IS- 10CE † LP 6/ 24 240 4 ML- 16 GP 3- 240 4 M- 16AU LP 7/ 28 240 4 ML- 16 GP 4- 240 FT ML- AU LP 8/ 32 240 4 ML- 16 GP 8- 240 2 IS- 16AU GP 8- 240 4 IS- 16AU GP 12- 240 4 IS- 16AU GP 16- 240 4 IS- 16AU X P S W I T C H I N G P A N E L S GP 20- 240 4 IS- 16AU GP 24- 240 4 IS- 16AU No. of Control Feed Main GP 72- 240 4 ML- 16AU Model Switching Circuit Power Through Only Lugs Only 277 VOLTS Prefix Circuits Voltage (FT) (ML) GP 3- 277 4 M- 20 120-127 VOLTS GP 4- 277 FT ML- — XP 4- 120 FT ML- GP 8- 277 2 ML- 20 XP 8- 120 FT ML- GP 8- 277 4 ML- 20 XP 12- 120 FT ML- GP 16- 277 4 ML- 20 XP 16- 120 FT ML- GP 16- 277 4 M125- 20 XP 24- 120 FT ML- GP 72- 277 4 ML- 20 XP 32- 120 FT ML- XP 48- 120 FT ML- † Panels meet CE requirements . 220-240 VOLTS XP 4- 230 FT ML- XP 8- 230 FT ML- Popular models that meet most applications are listed; consult your XP 12- 230 FT ML- Lutron representative for additional models . XP 16- 230 FT ML- XP 24- 230 FT ML- How to Build a Model No.: Take the model prefix (i.e. GP, LP, XP), XP 32- 230 FT ML- add the number of circuits, the voltag e, feed type, panel type an d XP 48- 230 FT ML- breaker size (as appropriate). For e xample: GP3-1204M-20 is a three 277 VOLTS circuit, 120/208V, 3φ, 4 wire feed, main lugs only, 20A branch XP 4- 277 FT ML- breakers panel. XP 8- 277 FT ML- XP 12- 277 FT ML- XP 16- 277 FT ML- XP 24- 277 FT ML- XP 32- 277 FT ML- XP 48- 277 FT ML- 8 www.lutron.com
Page 9
GP 24 Pa n e l GP Dimming Panels without cove r Offered in three cabinet sizes, from 3 to 72 circuits, prewired for 120-127, 220-240, 230 or 277 volts. Field w i r i ng is similar to wiring in distributi o n p a nel. Meets CE re q u i re me n ts for Euro p e. (See page 15 for specific dimension s and mounting instruction s.) Mini GP Panel with cove r GP 72 Panel without cove r GP 24 (CE) Pa n e l without cove r LP Dimming Panels For hand l i ng nu me rous small loads. Panels have from 1 to 8 four-circuit D i m m i ng Mo dules (4-32 switch legs, 8-16 KW). Pa nels cont rol Fluo re s c e nt and Electronic Low Voltage sources through Power Interface Accessories . (See page 15 for specific dimension s and mounting instructions.) Mini LP Panel with and without cove r LP Panel with and without cove r XP Switching Panels For Low Voltage switching control of large numbers of cir c u i t s. Pa nels have 1 to 12 four-circuit switching modules with individual circuit relays with me c h a n ical latching switch con t a c t s. (See page 15 for specific dimension s and mounting instruction s.) Mini XP Panel with and without cove r XP Panel with and without cove r 9
Page 10
Set presets manually for simple setup GRAFIK Eye® 3 5 0 0 / 4 5 0 0 M O D E L S or use GRAFIK Eye LIAISON ™ software for repeatability and convenience . New GRAFIK Eye ® models 3500/4500 provi de increased functionality to the GRAFIK Eye 3000/4000 series. The new models offer greater flexibility, repeatability, convenience and systems integration. With GRAFIK Eye 3500/4500, the user now has the ability to perform a variety of programming functions and interrogate the system for feedback via RS232 or a WindowsTM- based software program— GRAFIK Eye LIAISON (optional). The new models maintain a common har dware architecture with 3100/4100 models and are retro-compatible with existing system s. GRAFIK Eye Control Unit PC for programming, interrogating system GRX-PRG Interface Low Vo l t a ge RS232 Digital Link Class 2 Wiring (SEL V ) Features of 3500/4500 Models: 1%. All GRAFIK Eye Control Units Lockout. GRAFIK Eye products Non-dim. GRAFIK Eye prod ucts have an easy-to-use bar graph to set ship with stan dard intuitive approach have always had v a r ious Squa re Law ( a nd see) lig ht levels. The 3500/4500 to setting light levels. Some spaces curves for differe nt sources. Now Mo del now adds the ability to set may re q u i re tamper pro t e c t ion there are two non-dim options— l ig hts in 1% inc re me nts—a pre c i s io n for preset scenes or complete unit one for controlling lighting and on e that is not available with any o ther l o c ko u t . Four options, each more for controlling a separate relay wallbox-based prod uct. Levels for secure than the previous, ar e for a p ro j e c t ion screen or other similar rooms can be set i dentically available to protect/lockout units . a ud io / v i s u al equipment. using the 1% increments. These levels can be saved easily either m a nua lly or via GRX-PRG Interface and a PC. Additional Features: • Program system data at remote loca tion, prior to installation if necessary . • Set up system man ually, then interrogate system to retrieve program values. • Set up subsequent systems using data obtained from man ual setup. • Save preset and communication assignments . • Integrate with other A/V equipment or building management system s. • Create temporary scenes (not stored in the GRAFIK Eye Control Unit). Note: For specific model offerings, see page 4 for GRAFIK Eye 3000 an d page 6 for GRAFIK Eye 4000). 10 www.lutron.com
Page 11
GRAFIK Eye S O F T W A R E GRAFIK Eye LIAISON ™ and DESIGNER™ ® software features. Software for Operation and Setup GRAFIK Eye LIAISON Software Features Windows™-based (3.1 or 95) programming utility for GRAFIK Eye 3500/4500 to program the following: • Scenes – intensities and fade times—in 1% increments • Load types – inclu des non-dim option s • Temporary Mode setting (allows user to mak e lighting changes without changing stored presets) • Control unit communication assignments • Temporary, on-line scenes Specify Control Units, choose load types, and create preset scenes for a system all via Windows™-based LIAISON software program. Software for Design GRAFIK Eye DESIGNER Software Features Windows™-based (3.1 or 95) design software to create a one-lin e diagram, bill of materials and specification for any project: • Designs control systems 2 to 4 times faster • Automates and standardizes the specification process • Integrates with AutoCad ® and Microsoft® Access™ database formats • Accommodates circuit- or zone-based design s • Prepares job-specific documentation • Links to LIAISON Consult your Lutron representative for mo re info r ma t ion about D E S IG N E R . Provides load schedule and Accessory Controls information to create a one-line diagram, bill of materials, and specification for any project. 11
Page 12
A C C E S S O R Y Handheld wireless and wallstation GRAFIK Eye® C O N T R O L S Accessory Controls expand GRAFIK Eye 3000 and 4000 Series system capabilities . Use of more than 3 Accessory Controls and Low Voltage Interface Accessories per GRAFIK Eye 3000 Series Control Unit requires addition of Part No. GRX-12VDC Class 2 transformer (120V AC: 12 VDC). Consult factory for 220-240V application s. Class 2 (SELV) Low Voltage Accessory Controls (for GRAFIK Eye 3000 and 4000 Series) DESCRIPTION FUNCTIONS REF. P/N† GRX-IT, GRX-8IT Controls 4 (or 8) scenes plus master raise/lower and off. 362-592 Handheld Infrared Wireless Recalls scenes or fine tunes light levels. Turns lighting on Remote Control Transmitters or off. Note: Not included in 16 accessory maximum. NTGRX-2B-SL Turns lighting (scene 1) on or off. Selects 2 scenes (either 362-933, Two-Button Entrance Control 1/off, 9/10 or 13/14), partition opened/closed, pani c 362-593 station, sequencing, raise/lower . NTGRX-4S, NTGRX-4B Activates scenes 1-4; master raise/lower and off. 362-596 Scene Selection Control Recalls or fine tunes light levels. Activates scenes 1-4, 5-8, 362-934 Four-Button Control 9-12, or 13-16; operates one or more GRAFIK Eye units . GRX-4S-DW Activates scenes 1-4; master raise/lower and off. 362-597 Architrave™ Door Jamb Recalls or fine tunes light levels. I deal for door jambs . Control Operates one or more GRAFIK Eye units . NTGRX-4M Activates scene 1 or off for up to eight GRAFIK Eye 362-598 Master Control units, and all on or all off. NTGRX-4PS Provides 4 buttons to operate selected GRAFIK Eye units 362-599 Partition Control independently, or in combination to reflect partition status . NTGRX-4S-IR Activates scenes 1-4 and off by touch-buttons or infrared 362-602 Infrared Receiver/Scen e transmitters (above). Recalls or fine tunes light levels . Selection Control Activates scenes 1-4, 5-8, 9-12, or 13-16; operates on e or more GRAFIK Eye units . NTGRX-SI4S-IR Provides access to scenes 1-4 or 5-8 based on external 362-782 Infrared Receiver/Scen e c o ntact closure (example: to con t rol partitio ned spaces). C o nt rol/Switch Int e r fa c e † GRAFIK Eye Specification Submittal Sheets are available for downloading/printing on Lutron’s website, www.lutron.com. 12 www.lutron.com
Page 13
Low Voltage Interface Accessories (for GRAFIK Eye 3000 and 4000 Series) DESCRIPTION FUNCTION REF. P/N GRX-AV Two-way interface between GRAFIK Eye controls and contact- 362-600 Contact Closure Interface closure devices (A/V system s, timeclocks, security system s, occupant sensors, etc.). GRX-RS232 Integrates GRAFIK Eye controls with user-supplied PC or 362-756 RS232 Interface digital A/V equipment. GRX-ATC Integrates GRAFIK Eye controls with user-supplied PC or 362-812 RS232/Timeclock digital A/V equipment. Features built-in astronomi c Interface timeclock—4 schedules/60 events per schedule . GRX-PRG For use with GRX-3500/4500. Integrates GRAFIK Eye controls 366-579 3500/4500 Programmer with user-supplied PC or digital A/V equipment. Features Interface built-in astro no m ic timeclock (same as above). Pr o v ides access to advanced user-programmable features . G R X - C I R Provides remote infrared wireless control to GRAFIK Eye units . 362-601 Ceiling Mounted Functions with handheld transmitters . Activates scenes 1-4, Infrared Receiver 5-8, 9-12, or 13-16 via han d held transmitter. Operates on e or more GRAFIK Eye units . Line/Mains Voltage Power Boosters and Interface Accessories (for GRAFIK Eye 3000 Series only) NGRX-PB Increases single zone load capacity for incan descent, 362-603 Power Booster magnetic low voltag e, neon/cold-cathode sources. 1920W per z o ne @120V; 2400W @240V; 1200W flush m o u nt (with face plate), 1840W surface m o u nt (without face plate) @ 240V for CE. GRX-FDBI Single zone interface to dim or switch Lutron 362-622 Fluorescent Power electronic dimming ballasts. 16A per zone @ 120V , Interface 10A @ 240V. GRX-ELVI Single zone interface to dim electronic transformer 362-635 Electronic Low Voltag e supplied low voltage lighting. 1000W @ 120V , Power Interface 1200W @ 240V, 1000W @ 230V for CE. GRX-TVI Provides 0-10V control (BSI 929) and ballast switchin g 366-551 Phase Control to 0-10V c a p a b i l i t ies in one; allows 120V flu o re s c e nt cont rols the ability Ballast Interface to cont rol 0-10V ballasts that r e s ide in an indu s t r ial power g r id (for exa m p l e, 277V); pro v ides switching relays that can h a ndle the in-rush curr e nt of a circuit of ballasts. HP 2•4•6 Increases single zone load capacity to 2000 W/V A ( H P - 2 ) , 362-604 Dimming Module 4000 W/VA (HP), 6000 w/VA (HP-6), all @120V. For incandescent, magnetic and electronic low voltag e, neon and fluorescent sources. Up to 5 modules can be daisy chaine d for greater capacity (30,000 W/VA @120V, also 240A @277V for fluorescent). Note: Not for 100, 220-240V. Other Accessories NTGRX-1S Line/main voltage control. Switches lightin g 360-178 On/Off Doorway Control (scene 1) on or off from a remote wall location. (Functions as three-way switch.) Note: Also available: A Lockable Cover which prevents tampering with GRAFIK Eye controls and accessories and permits infrared operation—translucent black—Model No. GRX-___-GLC (Insert 1, 2, 3, or 4 in Model No. for wallbox gang size); and Matching Receptacles, 15A and 20A 120V conventional and GFCI, with matching telephone and cable TV jacks . 13
Page 14
GRAFIK Eye D I M E N S I O N S & Basic information; ® M O U N T I N G see instruction sheets for more details . Control Unit For specific Model No. in series, place a 1 or 5 in the blank space, i.e. GRX-3 102. Main Control Unit (GRX-3000, GRX-4000) Mount in standard 2-, 3- or 4-gang wallbo x MODEL NO. A B (3.5” deep, 89 mm). A † GRX-3 02 4-15/16” 1-13/16” † GRX-4 02 (123mm) (46mm) † GRX-3 03 6-11/16” 3-5/8” † GRX-4 03 (168mm) (92mm) 5 9 3 / 4 / GRX-3 04 8-5/16” 5-7/16” 16” 16” GRX-4 04 (208mm) (138mm) (85mm) (116mm) GRX-3 06 GRX-4 06 GRX-4 08 GRX-4 16 B 5 1 5 GRX-4 24 / 1 / 16” 16” (8mm) (49mm) † 5 7 For CE requirements, Control Unit dimensions ar e 8 / (208 mm) x 5 / (138 mm) and must mount in stan dard 4-gang wallbox. 16” 16” Accessories FIG. 1 FIG. MODEL NO. A B C D 1 NTGRX-1S 2-3/4” 4-9/16” 5/16” 1-3/8” B B NTGRX-2B-SL (70mm) (116mm) (8mm) (35mm) N TGRX-4S, 4B, 2-3/4” 4-9/16” 5/16” 13/16” 4 S I R (70mm) (116mm) (8mm) (21mm) NTGRX-4M 2-3/4” 4-9/16” 5/16” 13/16” A C D C D (70mm) (116mm) (8mm) (21mm) Wallbox Control Panels (NTGRX-1S, -2B-SL, -4S, -4B, -4SIR, -4M, and -4PS) NTGRX-4PS 2-3/4” 4-9/16” 5/16” 13/16” Mount in single-gang wallbox. (1) See mountin g (70mm) (116mm) (8mm) (21mm) notes below. 2 GRX-AV 5” 7-3/4” 2-1/2” — FIG. 2 GRX-RS232 (127mm) (197mm) (64mm) GRX-ATC GRX-PRG 3 GRX-4S-DW 1-3/4” 4-1/2” 1/4” 1-3/8” (44mm) (114mm) (6mm) (35mm) 4 NGRX-PB 4-1/2” 4-9/16” 11/16” 1-7/8” B GRX-FDBI/ELVI (114mm) (116mm) (17mm) (48mm) Mounting Notes: (1) Mo u nts in standa rd sing l e - g a ng wallbox 2.75" deep minimum, 3.5" deep r e c o m me nded (Lutron Part No. A C SB-1G). (2) Lutron supplies backbox (Part No. 241-399). (3) M o u nts on standa rd 4"x4" junc t ion box (Lutron Part No. 241-496). (4) Mo u nts in standa rd two-gang wallbox; 2.75" deep minimum, 3.5" deep r e c o m me nde d. (Two each Lutron Part No. SB-1G). Interface Control (GRX-AV, -ATC, -PRG, -RS232) Mounts on 4” -square utility box. (3) 14 www.lutron.com
Page 15
Accessories (continued) XP Switching/LP Dimming Panels FIG. 3 FIG. 1 XP Panel (24, 32 and 48 switching circuits) Wall-mounted: allow 12” (305 mm) clearance above C a nd below panel. Refer e nce public a t ion P/N 362-849. B LP Panel (16-32 switching legs) B Wall-mounted: allow 12” (305 mm) clearance above a nd below panel. Refer e nce public a t ion P/N 366-552. D A C D FIG. 2 C Architrave Door Jamb Control (GRX-4S-DW) D B Mini XP Pa n e l (4, 8, 12, and 16 switching circ u i t s ) Mounts directly in door jamb. (2) Wall-mounted; allow 12” (305 mm) clearance above a nd below panel. Refer e nce public a t ion P/N 366-529. E Mini LP Panel (4, 8, and 12 switching legs) E Wall-mounted: allow 12” (305 mm) clearance above FIG. 4 a nd below panel. Refer e nce public a t ion P/N 366-530. A A B FIG. MODEL NO. A B C D E DEPTH A C D 1 XP, LP 14.375” 59” 8” 41.75” 11” 4” Power Booster (NGRX-PB),Fluorescent Interface (37cm) (150cm) (20cm) (106cm) (28cm) (10cm) (GRX-FDBI), Electronic Low Voltage Interface 2 Mini XP, 14.375” 26” 8” 21.5” 10.75” 4” (GRX-ELVI), Mount in two-gang wallbox. (4) Mini LP (37cm) (66cm) (20cm) (55cm) (28cm) (10cm) Dimming Panels FIG. 1 C FIG. 2 C FIG. 3 C B D B D D B A A Mini Panel, GP3 and GP4 (3 and 4 circuits) GP8, GP12, GP16, GP20, and GP24 Panels Wall-mounted: allow 12” (305 mm) clearance above (8, 12, 16, 20 and 24 circuits) a nd below panel. Refer e nce public a t ion P/N 362-643. Wall-mounted: allow 12” (305 mm) clearance above A a nd below panel. Refer e nce public a t ion P/N 3 6 2 - 6 0 5 . FIG. MODEL NO. A B C D DEPTH GP72 Panel Handles up to 3 feeds. Floor-standing: allow 12” (305 mm) clearance above panel. Reference 1 GP3,GP4 11” 18” 9.625” 19.5” 6.25” publication P/N 362-788. (28cm) (46cm) (25cm) (50cm) (16cm) 2 G P 8, 1 2, 1 6 , 27.6” 32.9” 11.9” 35” 12” 20 and 24 (70cm) (84cm) (30cm) (89cm) (31cm) 3 GP72 52.3” 86” 50” 87” 14” (133cm) (218cm) (127cm) (220cm) (36cm) 15
Page 16
GRAFIK Eye® S P E C I F I C A T I O N S Key performance features for all system components . LUTRON Quality Systems Safety standards listed above apply to one or more products in the GRAFIK Eye product line. Consult factory for specific infor m a t i o n . Registered to ISO 9001 General Specifications • The entire lighting control system shall be U.L., CSA or CE marked as appropriate. Manufacturer shall maintain ISO 9001 certification. Dimming system shall be covered by a minimum one-year warranty from time of purchase . • Manufacturer shall be capable of providing on-site service support within 24 hours anywhere in the continental U.S.A., an d within five business days anywhere in the world, e xcept where special visas are required . • Premium Temperature Margins: Panels operate at a minimum of 20 degrees Celsius below the power con ducting component temperature rating. Electronic components live twice as long for every 10 degrees Celsius below the rating at which they operate both increasing semicon ductor reliability and ensuring the system’s design life span. Accessories Control Unit • Four-Scene Control(s) shall be Preset dimming control shall incorporate an airgap switch relay which shall be capable of recalling any one of four accessible without removing the faceplate . scenes, master raise/lower and off. • P reset dimming con t rol shall meet ANSI/IEEE Std. C62.41©1980, tested to with s t a nd Control shall provi de access for voltage surges of up to 6000V and current sur ges of up to 200A without damag e. up to 16 scenes . • Preset dimming control shall provi de power failure memory . • Wireless Infrared Transmitter(s) • Faceplate shall attach using no visible means of attachment. shall be capable of recalling any on e of four preset scenes and off. • Controls shall incorporate built-in wi de angle Infrared Receiver, providing control In addition, a master raise/lower shall via a separate Wireless Remote Control T ransmitter from up to 50 feet away . be provided. The transmitter shall be • Programming of preset scenes shall be accomplished without the use of an ENTER manufactured by the dimming system or STORE button. manufacturer. The range of the transmitter to an y s i ngle receiver shall be at least 50 feet. • System should employ common architecture for prod ucts, accessories and user interfaces . 16 www.lutron.com
Page 17
Ballasts • Ballasts shall withstand 4000 volt surges as specified in ANSI C62.41. • Ballasts shall preheat lamp cathodes before applying arc voltage to ensur e rated lamp life is not diminished . • Ballasts shall internally limit in-rush Installation current to not e xceed three amps at 277 volts or seven amps at 120 volts • Wiring from preset dimming control to avoid computer problem s, nuisance to Dimming Panel and Accessory circuit breaker trips, and control Controls shall be Low Voltage Class contact malfunction s. 2 Wiring (SELV). XP Switching Panel Dimming Panels: LP/GP • Relays shall be rated for 16 Amps , • Panels shall be completely prewired by the manufacturer. The contractor shall be continuous duty, for the followin g required to provi de input feed wiring, load wiring, and control wiring. load types: Incan descent/Tungsten, • Panels shall be cooled via free-convection, unai ded by fans, and capable o f Electronic and Magnetic Low Voltag e, continuous operation to all of these section specifications within an ambien t Neon/Cold-Cathode, high intensity temperature range of 0°C (32°F) to 40°C (104°F). Panel shall provi de capability to discharge, high in-rush Electronic an d electronically assign each circuit to any zone in the dimming system. Panels usin g Magnetic Fluorescent lamp ballasts . mechanical switches, rewiring, or EPROMS shall not be acceptable . • Load shall be switched in a manner • One type of Dimming Module/Card shall be used for all sources. Systems requirin g that ensures no arcing will occur at different types of modules or modular dimming cards shall not be acceptable . the mechanical contacts when power • A positive air gap relay shall be employed with each dimmer to ensure that th e is applied to the load circuit. load circuits are open when the “off” function is selected at a control station. • Dimmers shall operate the following sources/load types with a smooth contin uous Square Law dimming curve: Incan descent, Tungsten and Magnetic Low Voltag e Transformer, Electronic Low Voltage T ransformer, Fluorescent Electronic Dimmin g Ballasts (Ballasts for Fluorescent fixtures must be Lutron Hi-lume “FDB” or “Eco-10” series), Neon and Cold-Cathod e. • Dimmers shall also be capable of operating sources on a non-dim basis. Dimmers shall be electronically assigned to the appropriate load type/dimming curve an d can be reassigned at any tim e. Universal-type dimmers that do not adjust th e dimming curve shall not be acceptable . 17
Page 18
GRAFIK Eye 3 0 0 0 & 4 0 0 0 Colors, finishes, or dering information ® S E R I E S and warranty. GRAFIK Eye Accessories and Control Units are available in a variety of colors and finishes. Custom paint matching an d personalized engraving of Accessories and Control Units also are available. Consult your Lutron representative to find th e right custom solution for your needs . Engraving is available in the following typestyles: HELVETICA BOLD Choice of translucent ROMAN BLOCK or opaque cover . GOTHIC Engrave scene Engraving is available in the name beneath each button, i.e. Room following colors: Setup, G e ne ra l Me e t i ng, A/V White, Beige, Black, Brown, Gray P re s e nt a t i on, etc. Controls are available in the Your company name or Choice of six distinct colors an d following colors: logo here. three metallic/metal finishes . Control Unit * Example: Model GRX-3104-T-BC shown above . Cover—Opaque to match base color (A) or translucent black (T). Base—White (WH), bei ge (BE), ivory (IV), brown (BR), black (BL), gray (GR), bright brass (BB), brigh t chrome (BC), satin brass (SB). Accessories Accessory Controls, receptacles an d White (WH) Beige (BE) Ivory (IV) Brown (BR) Black (BL) jacks are available in white (WH), beige (BE), ivory (IV), brown (BR), black (BL), and gray (GR). Architrave™ Controls are available in bright brass (BB), and white (WH). Gray (GR) Bright Brass Bright Chrome Satin Brass Handheld transmitters and ceilin g (BB) (BC) (SB) receivers are available in white (WH). Global Product Offerings: Ordering Information: Add suffix to all Model Nos. when Follow the examples below when creating Model Nos. to or der product: ordering for global power • To order a four-zone Control Unit with a bright brass (BB) base and a requirements: translucent (T) cover in 120V, the model number would be GRX-3104-T-BB . Volts Model Suffix • To order a six-zone Control Unit with a white cover (A) to match a white (WH) 120V (none) base in 230V, the model number would be GRX-3106-A-WH-CE. 100V –JA 220-240V –AU Consult your Lutron representative for more details about custom finishes an d 230V –CE engraving or call the Lutron Hotline at 1.800.523.9466. 18 www.lutron.com
Page 19
Warranty Lutron warrants each new unit, for a period of one year from the date of shipment, to be free from defects in materials or workmanship under conditions of normal use and specified ambient temperature when installed and operated under Lutron product specifications and in accordance with the applicable National Electrical Code and Safety Standards of Underwriters Laboratories. Lutron shall, at its option, repair or replace any defective unit which in its opinion, has not been improperly installed, wired, insulated, used or maintained, provided, however, that Lutron shall not be required to remove, install or re-install any defective unit and provided that Lutron is promptly notified of said defect within the aforementioned warranty period. The foregoing warranty and optional remedies are exclusive and, except for the foregoing warranties, THERE ARE NO EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY NOR OF Lutron is the ANY OTHER TYPE. In no event shall Lutron or any other seller be liable for consequential World’s Leading Manufacturer or special damages, nor for any repair work undertaken without its prior written of Lighting Controls consent, nor shall Lutron’s liability on any claim for damages arising out of or connected A de d ic a t ion to quality and a with the manufacture, sale, installation, delivery of use of said unit ever exceed the c o m m i t me n t to pro duct inno v a t io n price paid therefore. have ma de Lutron the world’s leading These products may be covered by one or more of the following U.S. patents: 4,797,599; manufacturer of solid state controls 4,803,380; 4,893,062; 5,030,893; 5,191,265; 5,430,356; 5,463,286; 5,633,540; DES to ma na ge t he visual enviro n me nt . 308,647; DES 310,349; DES 311,170; DES 311,382; DES 311,485; DES 311,678; DES L u t ron was amo ng the first 313,738; DES 335,867; DES 344, 264; and cor responding foreign patents. Other U.S. c o m p a n i es to be re g i s t e red to ISO and foreign patents may be pending. 9001, the bro a dest int e r na t io na l Lutron reserves the right to make product improvements or changes without prior q uality standa rd. notice. Lutron, GRAFIK Eye, Eco-10, Hi-lume, Serena and Architrave are trademarks of L u t ron pro ducts are available in Lutron Electronics Co., Inc. AutoCAD is a trademark of Autodesk, Inc. Microsoft, Access v o l t a ge s , fre q u e nc ies and capacities and Windows are trademarks of Microsoft Corp. for re s ide nt ial, comme rc ial a nd © 1997 Lutron Electronics Co., Inc. i ns t i t u t io n al applic a t io ns, and they meet or exc e e d a p p l icable na t io nal a nd int e r na t io n al pro duct safety Consult your Lutron representative for the latest prod uct information or to standards. find the right combination of Control Units, Accessories and Dimming Modules C u s t o m ers in over 65 coun t r ies for a specific job . de p e nd on Lutron cont rols fo r If you need more detailed information about GRAFIK Eye controls or other re l ia b i l i t y , de s ign eleganc e, and Lutron lighting control prod ucts, dial into our FAX-On-Demand line through our s u p e r ior perfo r ma nc e. For the toll-free hotline or visit us at our website . na me of your ne a rest re p re s e nt a t i v e , Hotline: 1.800.523.9466 distributor or sales ag e nt, call a ny of our worldw ide of f ic e s. Website: www.lutron.com 19
Page 20
World Headquarters Asian Offices L u t ron Electro n ics Co., Inc. L u t ron As u ka Corpora t ion K.K. 7200 Suter Road Ma dre Ma t s uda Bldg., 3F C o o p e r s b u r g, PA 18036-1299 U.S.A. 4-13 Kio i - c ho Toll Free: 800-523-9466 C h i y o da - K u, Tokyo 102, J a p a n (U.S.A., Canada & Caribbean) Toll Fre e : (0120) 083417 (J a p a n ) Tel: 610-282-3800; Tel: 03-3234-1486; I nt e r na t io n al 1-610-282-3800 I nt e r na t io n al 81-3-3234-1486 Fax: 610-282-3090; Fax: 03-3234-0167; I nt e r na t io n al 1-610-282-1243 I nt e r na t io n al 81-3-3234-0167 European Headquarters Hong Kong Sales Office L u t ron EA Ltd. Tel: 2593-1119; L u t ron Ho u s e I nt e r na t io n al 852-2593-1119 6 Sovere ign Close Fax: 2593-1197; Wa p p i ng I nt e r na t io n al 852-2593-1197 L o ndon, E1-9HW, Eng l a nd UAE, Dubai Sales Office F re e p h o n e : 0800 282107 (U.K.) Tel/Fax: 04-440-206; 0130-8151-34 (Germ a ny ) I nt e r na t io n al 971-4-440-206 Tel: 0171-702-0657; I nt e r na t io n al 44-171-702-0657 Fax: 0171-480-6899; I nt e r na t io n al 44-171-480-6899 LUTRON Quality Systems Safety standards listed above apply to one or more products in the GRAFIK Eye product line. Consult factory for specific infor m a t i o n . Registered to ISO 9001 w w w. l u t ro n . c o m ©1997 Lutron Electronics Co., Inc. Printed in U.S.A 9/97 P/N 366-580 For help with applications, call: 8 0 0 - 5 2 3 - 9 4 6 6 (U.S.A., Canada & Caribbean); (1) 610-282-3800 (Other Ar e a s )
Need assistance or looking to source this item?