Future Automation WB-DA3 technical sheet

Page 1

WB-DA3 WALL BOX FOR DA3 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

WB-DA3 WALL BOX FOR DA3 SPECIFICATION MEASUREMENTS Product Dimensions (WxHxD) 661mm (26 1/2") x 727mm (28 5/8") x 99mm (3 7/8") Product Weight 13kg (29lb) Packaging Dimensions 880mm (34 5/8") x 800mm (31 1/2") x 220mm (8 11/16") Shipping Weight 15kg (33lb) Mounting Patterns Supported VESA 400, 300, 200, 100 W x 400, 300, 200, 100 H Product Options / Features Specific B&O and Loewe mounts / adapters, Custom RAL paint finishes 1x Wall Box, 1x Pair of Accessory Clamps, 1x Buffer Stop, 2x Horizontal Wall Trim Strips , 2x Vertical Wall Trim Package Contents Strips & Bolt Pack Marine Suitable No TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

WB-DA3 1" 26 Minimum Depth B WALL BOX FOR DA3 MINIMUM ADJUSTMENT Behind Mount Bracket ACCESSORY MOUNTING 3 5/16" The WB-DA3 features easily adjustable 84 accessory clamps and mounting space Minimum Height for AV accessories. Behind Mount Bracket To access the mounting space, the DA3 must first be moved to the out position. 13/16" 20 Minimum Distance from Arm to Clamps B SECTION B-B 10 3/4" 274 Distance from Upright to Buffer Post 1 1/2" 39 SECTION D-D Maximum Depth Behind Mount Bracket C MAXIMUM ADJUSTMENT D D 21 15/16" 558 Maximum Height Behind Mount Bracket 5/16" 7.5 TECHNICAL SHEET Minimum Distance UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 from Arm to Clamps WWW NET . . SHEET 3 FUTUREAUTOMATION C SECTION C-C

Page 4

WB-DA3 WALL BOX FOR DA3 CABLE ROUTING Cables can be run along the top or bottom arms as shown. Secure the cables using cable ties and make sure to allow slack at pivot points. CABLE KNOCK OUT CABLE TIE BRIDGE APPROX CABLE TIE J BOX KNOCK OUT POSITION ALLOW SUFFICIENT SLACK AT PIVOT POINTS TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

WB-DA3 WALL BOX FOR DA3 GENERAL DIMENSIONS IN POSITION OUT POSITION 24 11/16"

628

57 23 min. 7/8" min. 2 1/4"

122 4 13/16"

26" 3 7/8" 661 99

400 15 3/4"

782 30 3/4"

727 694 28 5/8" 27 5/16"

400 15 3/4"

SECTION A-A 4 15/16" 125 C WALL BOX L C TO SCREEN L 8 1/8" 17 7/8" 207 454 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 5 FUTUREAUTOMATION

Page 6

WB-DA3 WALL BOX FOR DA3 WALL BOX MOUNTING DIMENSIONS

269 237 150 150 0 10 9/16" 5 7/8" 0" 5 7/8" 9 5/16"

53 54 53 2 1/8" 2 1/16" 2 1/16"

11 15/16" 303 1/4" 7" 6.5 178 3 1/2" 89 C C L L 0" SYM SYM 0 3 1/2" 89 1/4" 6.5 7" 178 11 15/16" 303 1 13/16" 46 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

WB-DA3 WALL BOX FOR DA3 WALL FRAMING DIMENSIONS Horizontal studs should be used, with the Wall Box fixed through the three top and three bottom fixing holes. 25"

635

FIXING HOLES TOP

4" min. 101 min.

699 min. 27 1/2" min.

SIDE FIXING SLOTS BOTTOM FIXING HOLES INSERT THE WALL BOX INTO THE VOID AS SHOWN THEN SECURE THROUGH FIXING HOLES TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 003 WWW NET . . SHEET 7 FUTUREAUTOMATION