Future Automation SPS-VS-5-QA2 technical sheet

Page 1

SPS-VS-5 - QA2 SLIDING PANEL MECHANISM - VERTICAL SPLIT TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

SPS-VS-5 - QA2 SLIDING PANEL MECHANISM - VERTICAL SPLIT SPS-V - VERTICAL - SINGLE PANEL MODEL DESCRIPTION MIN SCREEN HEIGHT MAX SCREEN HEIGHT SPS-V-5 Vertical - Single Panel 700 [27 9/16"] 800 [31 1/2"] SPS-V-6 Vertical - Single Panel 801 [31 9/16"] 950 [37 3/8"] SPS-V-7 Vertical - Single Panel 951 [37 7/16"] 1100[ 43 5/16"] SPS-V-8 Vertical - Single Panel 1101[ 43 3/8"] 1250[ 49 3/16"] SPS-VS - VERTICAL SPILT - DOUBLE PANEL SPS-VS-5 Vertical - Double Splitting Panel 700 [27 9/16"] 800 [31 1/2"] SPS-VS-6 Vertical - Double Splitting Panel 801 [31 9/16"] 950 [37 3/8"] SPS-VS-7 Vertical - Double Splitting Panel 951 [37 7/16"] 1100[ 43 5/16"] SPS-VS-8 Vertical - Double Splitting Panel 1101[ 43 3/8"] 1250[ 49 3/16"] SPS-HZ - HORIZONTAL - SINGLE PANEL MODEL DESCRIPTION MIN SCREEN WIDTH MAX SCREEN WIDTH SPS-HZ-6 Horizontal - Single Panel 1400 [55 1/8"] 1600 [63"] SPS-HZ-7 Horizontal - Single Panel 1601 [63 1/16"] 1850 [72 13/16"] SPS-HZ-8 Horizontal - Single Panel 1851 [72 7/8"] 2100 [82 11/16"] SPS-HZS - HORIZONTAL SPILT- DOUBLE PANEL SPS-HZS-6 Horizontal - Double Splitting Panel 1400 [55 1/8"] 1600 [63"] SPS-HZS-7 Horizontal - Double Splitting Panel 1601 [63 1/16"] 1850 [72 13/16"] SPS-HZS-8 Horizontal - Double Splitting Panel 1851 [72 7/8"] 2100 [82 11/16"] TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

SPS-VS-5 - QA2 SLIDING PANEL MECHANISM - VERTICAL SPLIT 2. Panel Retracts 1. Panel Closed SPECIFICATION MEASUREMENTS Minimum Screen Height 700 [27 9/16"] Maximum Screen Height 800 [31 1/2"] Minimum Screen Width 1100 [43 5/16"] Maximum Screen Width 1600 [63"] Maximum Moving Panel Weight 30Kg (88lbs) per panel Maximum Screen Weight 45Kg (99lbs) Total Mechanism Weight TBC Packaging Dimensions (LxWxH) TBC Shipping Weight TBC 4. Screen Advances 3. Panel Lifts Movement Type Motorised Power Supply Required 110V - 240V AC Power Consumption Max. 120W Power Consumption Standby 3W Mounting Patterns Supported VESA 400, 300, 200 W x 400, 300, 200 H Control Options IR Remote, Contact Closure Product Options / Features AB pairing option Package Contents Mechanism, IR remote control, Bolt Pack Marine Suitable Yes (Indoor) TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

SPS-VS-5 - QA2 SLIDING PANEL MECHANISM - VERTICAL SPLIT CABINET DIMENSIONS - WIDTH AND HEIGHT 40 9/16" Height Below Height Below 1030 Screen Height Install Height 5 5/16" 5 5/16" clearance overidden Screen Center Line Screen Center Line 135 135 SECTION A-A 44 1/2" 85 1/16" 44 1/2" 40 9/16" 31 1/2" 27 9/16" Internal Cabinet Width = Screen Width + 280 1130 2160 1130 1030 800 700 B 85 1/16" SECTION B-B SECTION B-B Screen Width Install Width 2160 Minimum Screen Height Maximum Screen Height 43 5/16" 63" 11" 31 1/2" 1100 1600 Screen Width + 280 800 B 27 9/16" 700 L C 43 5/16" 1100 1030 40 9/16" Moving Panel Height = (Screen Height - 5) / 2 63" 1600 A A Height Above Screen 20 11" 13/16" 280 C Screen L Opening Width = 2160 84 1/4"2140 84 1/4"2140 2160 Opening Height = Screen Height +10 85 1/16" 85 1/16" Opening Height Screen Width +10 Opening Width = Install Height Opening Height = Screen Height +10 Install Height Screen Width +10 Mechanism Height 13/16"20 Mechanism Height

L C 1130 44 1/2" Height Below Screen Moving Panel Height = (Screen Height - 5) / 2 B The install height for the SPS-VS-7 is always 2460 [96 7/8"] regardless of the B screen. C TECHNICAL SHEET The SPS-VS will always require additional space below the seceen L UK +44 (0) 1438 833577 US +1 (603) 742 9181 C ISSUE 002 compared to above the screen . L WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

SPS-VS-5 - QA2 SLIDING PANEL MECHANISM - VERTICAL SPLIT CABINET DIMENSIONS - DEPTH A Screen - OUT Screen - IN The minimum depth of 235mm [9 1/4"] allows for a 1 15/16" 50 maximum screen depth of 30mm [1 3/16"]. D Max. Front Panel and Batten Thickness DETAIL D Screens with a greater thickness will need the cabinet depth to increase i.e. a 100mm [3 15/16"] thick screen will require a cabinet of 305mm [12"]. 13/16" Screens thinner than 30mm [1 3/16"] must still use 20 the minimum 235mm [9 1/4"] cabinet depth. Front Panel Thickness 1 3/16" 30 2 9/16" 65 Moving Panel A A Retract Thickness Recomended batten to support front panel above opening The moving panel retracts back by 65mm [2 9/16"] before splitting. For this reason it is advised the front panel work and support batten is no more than 50mm [1 15/16"] thick to give 15mm [9/16"] clearance. A Thicker panels are possible, but will add to the cabinet depth and require customisation to the mechanism design. 9 1/4" 235 Minimum Internal Cabinet Depth TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 5 FUTUREAUTOMATION

Page 6

A SPS-VS-5 - QA2 SLIDING PANEL MECHANISM - VERTICAL SPLIT QA2 - QUAD ARM The Quad Arm has a service mode that can be used during installation and servicing of the mechanism and the screen. QA2 - OUT QA2 - SWIVEL QA2 - SERVICE QA2 - IN This allows the screen to be andvanced out from the wall to provide access to rear of the screen and inside the mechanism A A during fitting. 130 5 1/8"

E E A A 19 11/16" 40° 500 Max Mount Height Maximum QA2 swivel is 75 . A However depending on the screen and cabinet 15 3/4" depth this will need to be reduced to prevent 400 the screen being obscured by the cabinet. Max Mount Width 29 15/16" 761 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

SPS-VS-5 - QA2 SLIDING PANEL MECHANISM - VERTICAL SPLIT CABINET DETAILING & ACCESS The SPS mechanism requires certain access for installation and QA2 to be serviced. For installation the top panel must be removable to provide access to all the fixing points of the SPS mechanism. For servicing the best option is to have the areas to the left and right of the opening on hinges. This will provide enough access Top Panel to everything that will be needed to service and maintain the (removable for installation) mechanism. Alternatively the side panels could be made to be Hinging side panel easily removable on suitable catches / fixings. (removable for service & maintenance) The Moving Panel Mechanism mounts to the side walls of the cabinet, and the Advance Bracket mounts to the back of the Moving panel bracket cabinet. It is essential that these surfaces can take the weight of the mechanism, moving panel and screen. The SPS and QA2 are each supplied with a control box on a 3m [10'] flying lead linked together via contact closure. These must be fitted in an easily accessible location. These will be the first item to be checked if there is an issue with the mechanism. Hinging side panel Mains power and control connections (IR sensor / receiver, (removable for service contact closure) are all made at the control box. & maintenance) Motor Telescopic Drive shaft RS232 Link Mechanism Cables Power Cables Control box wiring loom must be routed To Mains Power to the bottom left corner of the cabinet. Bottom panel (removable for service & maintenance) TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 7 FUTUREAUTOMATION

Page 8

SPS-VS-5 - QA2 SLIDING PANEL MECHANISM - VERTICAL SPLIT CONTROL BOX NOTE: RS232 CONTROL METHOD UNAVAILABLE. 207 8 1/8"

RS232 PORT IR OUTPUT INDICATOR LED CONTACT CLOSURE PORT IR LEAD INPUT EMERGENCY STOP 3.5mm [0.14"] JACK max CONNECTOR CABLE LOOM 20 LENGTH APPROX 13/16" 118 1/8" 3000 8 CORE CABLE SPS SWITCHES 10mm [3/8"] dia. 1/4" EU SPEC: 0.5mm²

US SPEC: 20AWG 8

5/16"

52 2 1/16" 2 CORE CABLE MAINS INPUT 5 SPS MOTOR 10mm [3/8"] dia. 3/16" 5 7/8" EU SPEC: 4mm² 150 US SPEC: 12AWG NOTES • POWER SUPPLY UNIT (PSU) WILL ALLOW 110V OR 240V AC INPUT. THE SAME PSU IS USED FOR EU OR US MAINS SUPPLIES. • OTHER THAN CONTROL CABLES, ALL CABLES TERMINATE AT CONTROL BOARD VIA STANDARD PHOENIX CONNECTORS. • CABLE LOOM LENGTH SUPPLIED AT APPROX. 3m [118"]. LOOM CAN BE EXTENDED UP TO MAXIMUM OF APPROX. 10m [400"]. • MINIMUM CABLE BEND RADIUS 25mm [1"]. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 8 FUTUREAUTOMATION

Page 9

1. Mount the SPS side channels to the side walls of the cabinet. SPS-VS-5 - QA2 Ensure the mechanism mount brackets are positioned 10mm back from the edge of the front SLIDING PANEL MECHANISM - VERTICAL SPLIT panels. 2. <PARA >Install the telescopic drive shaft between both sides of INSTALLATION OVERVIEW Up Switch the mechanism. ensure that the moving panel brackets are at the same height. 3. Run the mechanism, adjust the up switch so that the carriages moves the height of the moving panel + 25mm [1"]. C Rear View 1. Mount the mechanism side channels to the side walls of the cabinet. Ensure the mechanism Down Switch mount brackets are positioned 10mm back from the edge of the front panels. Up Switch Adjustment Loosen the bolt and slide the switch striker to the desired position. Ensure the bolt is tightened after adjustment. Switch Striker 2. Install the telescopic drive shaft between both 4. Mount the moving panel to the sides of the mechanism. Ensure that the moving panel brackets 110mm from moving panel brackets are at the same height. the base of the moving panel. 5. mount the moving panel back onto the mechanism, use the slots in the mount brackets to align the panel and get it into the desired position TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 9 FUTUREAUTOMATION

Page 10

SPS-VS-5 - QA2 SLIDING PANEL MECHANISM - VERTICAL SPLIT INSTALLATION OVERVIEW 4. Mount the moving panel to the moving panel brackets 15mm 5. Mount the moving panel back onto the mechanism, use the slots in the from the base of the moving panel and 94mm in from the edge. mount brackets to align the panel and get it into the desired position. 3 11/16" 3 11/16" 94 94 3 11/16" 94 Rear View of moving panel 4 5/16"110 4 5/16"110 3/8" 10 1. Mount the SPS side channels to the side walls of the cabinet. Ensure Recommended to use 5mm 3 11/16" the mechanism mount 3/8" shims to align the top moving 94 brackets are positioned 10 panel with the lower moving 10mm back from the panel. edge of the front panels. 2. <PARA >Install the 3/8" telescopic drive shaft 10 between both sides of Moving panel the mechanism. ensure bracket that the moving panel brackets are at the same height. Recommended to use 5mm shims to align the moving panel with the base of the aperture. 3/8" 10 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 10 FUTUREAUTOMATION