Future Automation SPS-HZS-8-QA2-60 technical sheet

Page 1

SPS-HZS-8 - QA2-60 SLIDING PANEL MECHANISM - HORIZONTAL SPLIT TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

SPS-HZS-8 - QA2-60 SLIDING PANEL MECHANISM - HORIZONTAL SPLIT SPS-V - VERTICAL - SINGLE PANEL MODEL DESCRIPTION MIN SCREEN HEIGHT MAX SCREEN HEIGHT SPS-V-5 Vertical - Single Panel 700 [27 9/16"] 800 [31 1/2"] SPS-V-6 Vertical - Single Panel 801 [31 9/16"] 950 [37 3/8"] SPS-V-7 Vertical - Single Panel 951 [37 7/16"] 1100[ 43 5/16"] SPS-V-8 Vertical - Single Panel 1101[ 43 3/8"] 1250[ 49 3/16"] SPS-VS - VERTICAL SPLIT - DOUBLE PANEL SPS-VS-5 Vertical - Double Splitting Panel 700 [27 9/16"] 800 [31 1/2"] SPS-VS-6 Vertical - Double Splitting Panel 801 [31 9/16"] 950 [37 3/8"] SPS-VS-7 Vertical - Double Splitting Panel 951 [37 7/16"] 1100[ 43 5/16"] SPS-VS-8 Vertical - Double Splitting Panel 1101[ 43 3/8"] 1250[ 49 3/16"] SPS-HZ - HORIZONTAL - SINGLE PANEL MODEL DESCRIPTION MIN SCREEN WIDTH MAX SCREEN WIDTH SPS-HZ-6 Horizontal - Single Panel 1400 [55 1/8"] 1600 [63"] SPS-HZ-7 Horizontal - Single Panel 1601 [63 1/16"] 1850 [72 13/16"] SPS-HZ-8 Horizontal - Single Panel 1851 [72 7/8"] 2100 [82 11/16"] SPS-HZS - HORIZONTAL SPLIT- DOUBLE PANEL SPS-HZS-6 Horizontal - Double Splitting Panel 1400 [55 1/8"] 1600 [63"] SPS-HZS-7 Horizontal - Double Splitting Panel 1601 [63 1/16"] 1850 [72 13/16"] SPS-HZS-8 Horizontal - Double Splitting Panel 1851 [72 7/8"] 2100 [82 11/16"] TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

SPS-HZS-8 - QA2-60 SLIDING PANEL MECHANISM - HORIZONTAL SPLIT 1. Panel Closed 2. Panel Retracts SPECIFICATION MEASUREMENTS Minimum Screen Width 1851 [72 7/8"] Maximum Screen Width 2100 [82 11/16"] Minimum Screen Height 1000 [39 3/8"] Maximum Screen Height 1300 [51 3/16"] Maximum Moving Panel Weight 15Kg (33lbs) Maximum Screen Weight 80Kg (176lbs) Total Mechanism Weight TBC Packaging Dimensions (LxWxH) TBC Shipping Weight TBC 3. Panel Slides 4. Screen Advances Movement Type Motorised Power Supply Required 110V - 240V AC Power Consumption Max. 120W Power Consumption Standby 3W Mounting Patterns Supported VESA 400, 300, 200 W x 400, 300, 200 H Control Options IR Remote, Contact Closure Product Options / Features AB pairing option Package Contents Mechanism, IR remote control, Bolt Pack Marine Suitable Yes (Indoor) TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

• The Screen Advance Heavy bracket can SPS-HZS-8 - QA2-60 accommodate a screen bolt pattern up to: VESA 800x600. Up to M8 diameter fixings. • The bracket can be positioned within the SLIDING PANEL MECHANISM - HORIZONTAL SPLIT opening as required based on TV VESA A mount location. CABINET DIMENSIONS - WIDTH AND HEIGHT 81 7/8" B B 2080 Width Left of Width Right of Screen Width Instal Width Screen Center Line Screen Center Line 78 3/4" 2000 72 7/8" 75 9/16" 81 7/8" 3 1/8" 78 3/4" 1851 1920 Screen + 2080 Screen + 80 2000 6 5/16" The SPS-HZ will always require 110mm [4 5/16"] to the side the opening oposite Opening Height = 160 75 9/16" 82 11/16" 6 5/16" 3 1/8" 3 1/8" Opening Width = the slide direction. Screen Height + 10 1920 2100 (2 x Screen) + 160 Screen + 80 Screen + 80 Screen Width +10 3 1/8" 80 The remaining height required is determined by the width of the screen being Screen Height Install Height installed in the mechanism. 82 11/16" 39 3/8" 51 3/16" 11" 2100 1000 1300 Screen Height + 280 The install height is calculated be the following formula (2 x Screen Height) + 190. 75 9/16" 1920 If this comes out under the mechanism height the mechanism height needs to be used instead. 72 7/8" 1851 A 151 9/16" SECTION B-B 3850 Minimum Screen Height Mechanism Width 39 3/8" 1000 135 A 51 3/16" 5 5/16" 1300 SECTION A-A 11" 78 3/4" 280 C C Min. Width Right of Screen = 2000 Width Left of Screen = Screen Width + 80 L L B B Screen C L SECTION B-B Maximum Screen Height Instal Width = (2 x Screen Width) + 160 C C Width left of Screen = Screen Width + 80 Width Right of Screen = Screen Width + 80 L L Opening Height Opening Width = Screen Width +10 Moving Panel Width = Moving Panel Width = Opening Height = 135 (Screen Width - 5) / 2 Screen (Screen Width - 5) / 2 Screen Height +10 5 5/16" C 1 15/16" L 1 15/16" Opening Width A 50 50 13/16" 13/16" Clearance Clearance 20 20 SECTION A-A TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

SPS-HZS-8 - QA2-60 SLIDING PANEL MECHANISM - HORIZONTAL SPLIT AA CABINET DIMENSIONS - DEPTH 1 3/16" 30 The moving panel retracts back by 65mm [2 9/16"] Moving Panel The minimum depth 245mm [9 5/8"] allows for a maximum screen before splitting. For this reason it is advised the front Thickness depth of 30mm [1 3/16"]. panel work and support batten is no more than 50mm [1 15/16"] thick to give 15mm [9/16"] clearance. Screens with a greater thickness will cause the cabinet depth to increase i.e. a 100mm [3 15/16"] thick screen will require a cabinet Thicker panels are possible, but will add to the cabinet of 315mm [12 3/8"]. depth and require customisation to the mechanism design. Screens thinner than 30mm [1 3/16"] must be in the minimum DETAIL D 245mm [9 5/8"] cabinet. SCALE 1 : 3 1 15/16" AA 2 9/16" 50 65 Max. Front Panel Retract and Batton Thickness Screen - IN Recomended battens to support Recomended battens to support front panel above opening front panel above opening Screen - OUT 9 5/8" 245 Minimum Internal Cabinet Depth 13/16" 20 D Front Panel Thickness TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 5 FUTUREAUTOMATION

Page 6

SPS-HZS-8 - QA2-60 SLIDING PANEL MECHANISM - HORIZONTAL SPLIT ADVANCE - IN QA2-60 - QUAD ARM The Quad Arm has a service mode that can be used during installation and servicing of the mechanism and the screen. This allows the screen to be advanced out from the wall to ADVANCE - OUT provide access to rear of the screen and inside the mechanism AA during fitting.

140 5 1/2" AA ADVANCE - SERVICE AA 919 36 3/16" AA ADVANCE - SERVICE 700 27 9/16" 23 5/8" Max Mount Height 40° 600 Maximum QA2-60 swivel is 75 . Max Mount Width However depending on the screen and cabinet depth this will need to be reduced to prevent the screen being obscured by the cabinet. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

SPS-HZS-8 - QA2-60 SLIDING PANEL MECHANISM - HORIZONTAL SPLIT Removable Right Side Panel CABINET DETAILING & ACCESS The SPS mechanism requires certain access for installation and to be servised. For installation the side panels must be removable to provide access to all the fixing points of the SPS mechanism. Hinging top panel For servicing the best option is to have the areas to the top and bottom of the opening on hinges and the right panel easily removable. This will provide enough access to everything that will be needed to service and maintain the mechanism. Alternatively Moving Panel Bracket these panels could be made to be easily removable on suitable catches / fixings. The Moving Panel Mechanism mounts to the top and bottom walls of the cabinet, and the Advance Bracket mounts to the back of the cabinet. It is essential that these surfaces can take the weight of the mechanism, moving panel and screen. Motor The mechanism is supplied with a control box on a 3m [10'] flying lead. This must be fitted in an easily accessible location. This will be the first item to be checked if there is an issue with the mechanism. Mains power and control connections (IR sensor / receiver, contact closure) are all made at the control box. Moving Panel Bracket Control box wiring loom must To Mains Power be routed to the bottom right corner of the cabinet. RS232 Link Mechanism Cables Hinging bottom panel Power Cables Side Panel TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 7 FUTUREAUTOMATION

Page 8

SPS-HZS-8 - QA2-60 SLIDING PANEL MECHANISM - HORIZONTAL SPLIT CONTROL BOX NOTE: RS232 CONTROL METHOD UNAVAILABLE.

207 8 1/8" RS232 PORT IR OUTPUT HZ INDICATOR LED CONTACT CLOSURE PORT EMERGENCY STOP IR LEAD INPUT CONNECTOR 3.5mm [0.14"] JACK CABLE LOOM max 8 CORE CABLE LENGTH APPROX 20 ADVANCE BRACKET 118 1/8" 13/16" 10mm [3/8"] dia. 3000 EU SPEC: 0.5mm² US SPEC: 20AWG 8 CORE CABLE SPS SWITCHES 1/4" 10mm [3/8"] dia.

EU SPEC: 0.5mm² US SPEC: 20AWG 8

5/16" 4 CORE CABLE SPS MOTOR 52 2 1/16" 10mm [0.4"] dia. 2 CORE CABLE EU SPEC: 0.75mm² US SPEC: 18AWG 5 5 7/8" SPS MOTOR 3/16" 150 MAINS INPUT 10mm [3/8"] dia. EU SPEC: 2.5mm² US SPEC: 14AWG NOTES • POWER SUPPLY UNIT (PSU) WILL ALLOW 110V OR 240V AC INPUT. THE SAME PSU IS USED FOR EU OR US MAINS SUPPLIES. • OTHER THAN CONTROL CABLES, ALL CABLES TERMINATE AT CONTROL BOARD VIA STANDARD PHOENIX CONNECTORS. • CABLE LOOM LENGTH SUPPLIED AT APPROX. 3m [118"]. LOOM CAN BE EXTENDED UP TO MAXIMUM OF APPROX. 10m [400"]. • MINIMUM CABLE BEND RADIUS 25mm [1"]. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 8 FUTUREAUTOMATION

Page 9

SPS-HZS-8 - QA2-60 SLIDING PANEL MECHANISM - HORIZONTAL SPLIT INSTALLATION OVERVIEW 2. Install the telescopic drive shaft between both sides of the mechanism. Ensure that the moving panel brackets are at the same height. Rear View Up Switch Adjustment Loosen Bolt and slide the switch striker to desired position. Ensure bolt is tightened after adjustment. C Switch Striker 3. Run the mechanism, adjust the up switch so that the carriages move the height of you panel + 25mm [1"]. Down Switch 1. Mount the Mechanism side channels to the side walls of the cabinet. Ensure the mechanism mount brackets are positioned 10mm back from the edge of the front panels. Up Switch TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 9 FUTUREAUTOMATION

Page 10

SPS-HZS-8 - QA2-60 SLIDING PANEL MECHANISM - HORIZONTAL SPLIT INSTALLATION OVERVIEW 4. Mount the moving panel to the moving panel brackets 40mm 5. Mount the moving panel back onto the mechanism, use the slots in the from the base of the moving panel and 94mm in from the edge. mount brackets to align the panel and get it into the desired position. 3 11/16" 94 3 11/16" 3 11/16" Rear View of moving panel 94 94 Recommended to use 5mm shims to align the moving panel with the side of the aperture. 110 110 4 5/16" 4 5/16" 3 11/16" 94 1 9/16" 40 1 9/16" 40 1 9/16" 40 1 9/16" 40 Recommended to use 5mm 3 11/16" shims to align the left and right 94 moving panels. 3 11/16" 94 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 002 WWW NET . . SHEET 10 FUTUREAUTOMATION