Future Automation PH technical sheet

Page 1

EDIT CUSTOM PROPERTIES 29. TITLE TO DESIRED PH2 PRODUCT CODE PROJECTOR HINGE MECHANISM 30. SUBHEADING TO DESIRED PRODUCT DESCRIPTION EDIT CUSTOM PROPERTIES TECHNICAL SHEET 31. ISSUE NO. UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 009 TO DESIRED ISSUE NUMBER WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

PH2 PROJECTOR HINGE MECHANISM SPECIFICATION MEASUREMENTS Maximum Projector Dimensions 470x480x220mm (18 1/2" X 18 7/8" X 8 11/16") Shipping Dimensions 1000x900x600mm (39 3/8" X 35 7/16" X 23 5/8") Maximum Projector Weight 50Kg (110lb) Shipping Weight 100Kg (220lb) Movement Type Motorised Standard Finish Powder-coated black Noise level 52db Power Supply Required 110V - 240V AC Control Options IR Remote, RS232, Contact Closure, RF Available Product Options / Features Custom RAL paint finishes Package Contents Mechanism, IR remote control TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 009 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

PH2 PROJECTOR HINGE MECHANISM MOUNTING OPTIONS Mechanism is supplied with hardware to allow projector to be mounted in an inverted configuration. This can be removed and projector can be mounted to the base of the hinging panel. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 009 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

PH2 PROJECTOR HINGE MECHANISM CABINET DESIGN For future servicing the 4"

mechanism requires a 102

removable front panel. 23 13/16"

605

705 27 3/4"

575 22 5/8"

31 11/16"

805

18 7/8" 480 158 6 3/16"

13/16" 20

23 7/16"

595

These apertures allow Mechanism flexibility for projecter wiring loom exits cable entry. out the bottom. 13/16" 20

22 1/4" 565

TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 009 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

PH2 PROJECTOR HINGE MECHANISM 6" 153 Top of stud to Centreline of CABINET DESIGN projector projector carriage mounting surface 9/16" 15

65 2 9/16" 15

9/16"

DETAIL B 17 1/16" 14 5/16" 434 364 18 1/16" 460 6" 153 14 15/16" Top of stud to 379 projector Top of stud to mounting surface projector mounting surface B INVERTED PROJECTOR STANDARD PROJECTOR 12" ORIENTATION ORIENTATION 305 TECHNICAL SHEET Minimum UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 009 WWW NET . . SHEET 5 FUTUREAUTOMATION Y Y

Page 6

PH2

PROJECTOR HINGE MECHANISM

300 274 74 11 13/16" 10 3/4" 2 7/8" 0 10 3/8" THRU MOUNTING MECHANISM Fixing holes BACK VIEW 27 11/16" 27 11/16" 703 703 25 11/16" 24 1/16" 652 612 10 3/8" THRU Fixing holes 16" Mechanism cable can be 407 13 7/16" repositioned by user to exit out 342 the back if required 6 3/8" 162 7/16" 2 13/16" 12 72 0 0

Cable access for 0 projector cables 82 801 602 3 3/16" 31 9/16"

23 11/16"

1 9/16" 1 9/16" Standard mechanism FRONT VIEW 40 40 cable exit BOTTOM VIEW 25 11/16" 25 11/16" 652 652 13 7/8" 13 7/8" 352 352 8 5/16" THRU 5 x Fixing holes 2 1/16" 52 0 0 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 009 WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

PH2 PROJECTOR HINGE MECHANISM MECHANISM RECOVERY 3" 76 7 1/16" 1" 180 25 1 3/16" 30 0

41 0 1 5/8"

Access to this cut-out will allow Access to this hole will allow 27 97 mechanism recovery in rare case mechanism recovery in rare case 1 1/16" 3 13/16"

of a motor failure. of a motor failure. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 009 WWW NET . . SHEET 7 FUTUREAUTOMATION

Page 8

18 7/8" PH2 480 Z MAX PROJECTOR HINGE MECHANISM Take care that all MAXIMUM PROJECTOR SIZE parts of the projector setup will clear the front panel. D 18 7/8" 480 MAX DETAIL D C 18 1/2" 470 MAX 220 MAX 8 11/16" IMPORTANT: The maximum projector dimensions shown do not account for cables or connectors. Z Make sure there is enough room for cables including cable bend radius. SECTION C-C C TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 009 WWW NET . . SHEET 8 FUTUREAUTOMATION

Page 9

PH2 PROJECTOR HINGE MECHANISM RS232 Port

207

Contact closure port 20 max. 13/16" max.

Emergancy stop connector IR output indicator LED IR lead input 3.5mm [1/8"] jack

2 CORE CABLE 52 MOTOR POWER 1/4" 2 1/16" 7

7mm [1/4"] dia. 2 CORE CABLE EU SPEC: 0.75mm² US SPEC: 18AWG MOTOR POWER 7mm [1/4"] dia. EU SPEC: 0.75mm²

US SPEC: 18AWG 8 5 5/16" 3/16"

5 7/8" 6 CORE CABLE 150 CATCH SWITCHES AND MOTOR CONTROL 7mm [1/4"] dia. NOTES EU SPEC: 0.5mm² US SPEC: 20AWG CABLE LOOM LENGTH SUPPLIED AT APPROX.. 3m [118"] 6 CORE CABLE CONTOL BOX MUST BE LOCATED IN AN EASILY ACCESSIBLE LOCATION CATCH SWITCHES AND MOTOR CONTROL 7mm [1/4"] dia. TECHNICAL SHEET EU SPEC: 0.5mm² UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 009 US SPEC: 20AWG WWW NET . . SHEET 9 FUTUREAUTOMATION