Future Automation M-FSA2 technical sheet

Page 1

ISSUE 001 SHEET 1 of 5 Technical Sheet M-FSA2 - Flat Screen Aluminium FUNCTION DESIGN HIGHLIGHTS A double arm wall bracket designed for use with small • Stunning brushed screens. Locks have been aluminium finish Lock Points on Wall added to hold the screen in the IN position when used in • Bi-directional swivel an indoor marine environment. • Strong stylish design Cables for the screen can be • Locks to hold the bracket in routed under the bracket for a the in position. Ideal for an neat look. indoor marine environment Wall Plate SUITABILITY OPTIONS • Non Marine version Suitable for screens with VESA available. 100 & 200 mount patterns. The M-FSA2 wall bracket is suitable for screens from 26" up to 32" with a max weight of 10kg. SPECIFYING Check wall makeup for suitability. Check viewing angles and position for feasibility. Check screen details for mounting Vesa compatibility. Bracket Handles Upright for Screen Mount WARNING IMPORTANT It is the responsibility of the installer to make sure the product is safely secured to the wall. Cable management is neatly organised and will not be obstructed or pinched by the bracket. www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565

Page 2

AA ISSUE 001 SHEET 2 of 5 Technical Sheet M-FSA2 - Flat Screen Aluminium Bracket Lock Bracket Movement DETAIL A SCALE 1 : 2 A By only releasing one lock the bracket can rotate in one direction around the lock still engaged. A maximum angle of 55 can be achieved in either direction. Simple robust clip locks onto stainless steel post mounted onto wall behind the screen. Recess Mounting When recessing the bracket a minimum gap of 10mm [0.4"] top and bottom and 50mm [2.0"] sides should be around the screen. NOTE: A larger gap at the side is required if the bracket is going to be used by releasing only one lock as shown above right. Screens up to 1000mm [39.4"] wide

can achieve a maximum angle of 90 in both directions when both locks are released. 0.4 min. Angle of rotation reduced for larger screens. 10 min. 50 min. 2.0 min. www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565

Page 3

ISSUE 001 SHEET 3 of 3 Technical Sheet M-FSA2 - Flat Screen Aluminium Dimensions MIN ARM EXTENSION HANDLES HIDDEN 74 2.9 Handle position can be adjusted Bracket so that they are either visible or hidden behind the screen. Depth HANDLES VISIBLE 9.9 0.0 9.9 12.3 12.3 0 252 252 312 312 MAX ARM EXTENSION 0.0 15.713.3 13.315.7 0 398338 338398 www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565

Page 4

ISSUE 001 SHEET 4 of 5 Technical Sheet M-FSA2 - Flat Screen Aluminium Dimensions - Wall Plates C B WALL PLATE CATCH PLATE 60 2.4 95 3.7 0.9 22 80 3.1 C 73 2.9 VESA Mount L C 0 0.0 Wall Plate L 1.0 25 2 x 5 0.2 80 3.1 95 3.7 6 x 8.4 0.3 DETAIL C SCALE 1 : 2 DETAIL B SCALE 1 : 3 3.0 2.4 0.0 2.43.0 0 75 60 60 75 www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565

Page 5

ISSUE 001 SHEET 5 of 5 Technical Sheet M-FSA2 - Flat Screen Aluminium Bracket Installation STEP 1. STEP 2. Lay screen face down on floor, offer up the bracket and align Fasten wall plate to the dimension taken in the previous step to determine screen mount holes with the slots in the uprights. final screen position. Adjust bracket vertical position and position of handles as With locks attached to the bracket, offer up to the wall, mark their positions desired and measure distance from top wall plate mount holes and fasten into place. to top of screen. Top Wall Plate mount holes to topof screen. www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565