Future Automation LSM-S-FP, fixed panel safety considerations

Page 1

LSM-S-FP LIFT SYSTEM MEDIUM WITH SWIVEL FIXED PANEL INTEGRATION CONSIDERATIONS General Mitigations: • Implement a hold to run/dead man switch operation. • Control methods should be located within direct line of site of the mechanism. High Risk - Crushing Crush hazard between the base • Implement password or key switch protected operation. panel and the cabinet top as the lift closes. Mitigation Ensure the top panel is not fixed to the box Tapeswitch TS16S enclosure. In the event of an obstruction the lid will lift Sensing Edge to clear it. Top Panel FIG A High Risk - Crushing Crush hazard at the cabinet aperture when mechanism is Low Risk - Falling Objects Falling object opening. hazard if objects are left on top of the top Mitigation The cabinet top should be floating panel. on locator dowels to allow vertical movement if Mitigation See general an obstruction is caught between it and the base mitigations. panel. A tapeswitch is another useful method to prevent fingers getting crushed (see Fig A). Base Panel Low Risk - Crushing Cables could be snagged if High Risk - Crushing Crush hazard below not properly managed through and around the the mechanism when mechanism is mechanism, causing damage to the mechanism closing. and electronics. Mitigation Ensure area below the mechanism Mitigation Ensure sufÏcient cable slack is allowed around movement joints to prevent is kept clear at all times when the mechanism stretching and/ or damage to the cables and/ is being used. If installing or maintaining the mechanism do so with the mechanism turned or mechanism. off. UK +44 (0) 1438 833577 US +1 (603) 742 9181 CONSIDERATIONS SHEET WWW.FUTUREAUTOMATION.NET ISSUE 002 SHEET 1