Future Automation LSH-S7-MO technical sheet

Page 1

LSH-S-7-MO MARINE OUTDOOR LIFT SYSTEM HEAVY WITH SWIVEL TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

TOP CAP OPTIONS: MODELDESCRIPTIONMIN SCREEN HEIGHTMAX SCREEN HEIGHT LSH-S-7-MO LSH-5Vertical Lift for 55" Screens680 [26 3/4"]800 [31 1/2"] MARINE OUTDOOR LIFT SYSTEM HEAVY WITH SWIVEL 920 [36 1/4"] 6 LSH-Vertical Lift for 65" Screens 800 [31 1/2"] 920 [36 1/4"] 7 LSH-Vertical Lift for 75" Screens1040 [40 15/16"] ADDITIONAL MOTOR OPTIONS: 8 LSH- Vertical Lift for 85" Screens1040 [40 15/16"]1160 [45 11/16"] MODEL DESCRIPTION MIN SCREEN HEIGHT MAX SCREEN HEIGHT FP - FIXED PANEL Z - SERVO MOTOR LSH-9Vertical Lift for 98" Screens1160 [45 11/16"]1280 [50 3/8"] LSH-S-5-MO Vertical Lift with Swivel for 55" Screens 680 [26 3/4"] 800 [31 1/2"] Higher lifting capacity & faster operation. TU - TELESCOPE (Not applicable to swivel) See LSH-TU-MO Tech 10 LSH- Vertical Lift for 100" Screens1280 [50 3/8"]1400 [55 1/8"] 920 [36 1/4"] LSH-S-6-MO Vertical Lift with Swivel for 65" Screens 800 [31 1/2"] See LSHZ-S-MO Tech 1520 [59 13/16"] 11 LSH- Vertical Lift for 115" Screens1400 [55 1/8"] 920 [36 1/4"] LSH-S-7-MO Vertical Lift with Swivel for 75" Screens 1040 [40 15/16"] ADDITIONAL FLAP OPTIONS: 1520 [59 13/16"] 12 LSH-Vertical Lift for 120" Screens1640 [64 9/16"] LSH-S-8-MO Vertical Lift with Swivel for 85" Screens 1040 [40 15/16"] 1160 [45 11/16"] LSHZ-S-9-MO Vertical Lift with Swivel for 98" Screens 1160 [45 11/16"] 1280 [50 3/8"] DESCRIPTION MODELMIN SCREEN WIDTHMAX SCREEN WIDTH 10-MO LSHZ-S- Vertical Lift with Swivel for 105" Screens 1280 [50 3/8"] 1400 [55 1/8"] BE - BOX ENCLOSURE S-5 LSH- Vertical Lift & Swivel for 55" Screens680 [26 3/4"]800 [31 1/2"] 1520 [59 13/16"] 11-MO LSHZ-S- Vertical Lift with Swivel for 115" Screens 1400 [55 1/8"] S-TU - SWIVEL & TELESCOPE 920 [36 1/4"] Vertical Lift & Swivel for 65" Screens LSH-S-6800 [31 1/2"] See LSH-S-TU-MO Tech 1520 [59 13/16"] 12-MO LSHZ-S- Vertical Lift with Swivel for 120" Screens 1640 [64 9/16"] 920 [36 1/4"] LSH-S-7Vertical Lift & Swivel for 75" Screens1040 [40 15/16"] DSP - DROP & SLIDE HF - HINGING FLAP LSH-S-8 Vertical Lift & Swivel for 85" Screens1040 [40 15/16"]1160 [45 11/16"] See LSH-DSP-MO Tech See LSH-HF-MO Tech ADDITIONAL MOVEMENT OPTIONS: LSH-S-9Vertical Lift & Swivel for 98" Screens1160 [45 11/16"]1280 [50 3/8"] LSH-S-10Vertical Lift & Swivel for 100" Screens1280 [50 3/8"]1400 [55 1/8"] DRL - DROP & ROLL 1520 [59 13/16"] LSH-S-11Vertical Lift & Swivel for 115" Screens1400 [55 1/8"] 1520 [59 13/16"] LSH-S-12 Vertical Lift & Swivel for 120" Screens1640 [64 9/16"] EP - EXTENSION POLE STANDARD I - INVERTED See LSH-S-EP-MO Tech See LSH-MO Tech See I-LSH-MO Tech TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 2 FUTUREAUTOMATION

10 3/8"

2 3/8" 60 16 9/16" 420

80 20 160 180 240 260 320 340 400 3 1/8" 100 420 13/16" 6 5/16" 7 1/16" 9 7/16" 10 1/4" 12 5/8" 13 3/8" 15 3/4"

3 15/16" 16 9/16"

Page 3

LSH-S-7-MO MARINE OUTDOOR LIFT SYSTEM HEAVY WITH SWIVEL SPECIFICATIONMEASUREMENTS Maximum Screen Height1040mm [40 15/16"] Minimum Screen Height920mm [36 1/4"] Maximum Lifting Capacity100Kg [220lb] (Higher Lifting Capacity Option Available, see LSHZ-S-7) SPECIFICATION MEASUREMENTS Internal Cabinet Height1350mm [53 1/8"] Maximum Screen Height 1040mm [40 15/16"] Screen Height Max. 920 [36 1/4""] Minimum Screen Height 920mm [36 1/4"] Min. 800 [31 1/2"] Packaging DimensionsTBC Maximum Lifting Capacity 100Kg [220lbs] (Higher Lifting Capacity Option Available, see LSHZ-S-7-MO) Shipping WeightTBC Internal Cabinet Height 1350mm [53 1/8"] Movement TypeMotorised SpeedTBC Packaging Dimensions TBC 53 1/8" Power Supply Required110V - 240V AC 1350 Shipping Weight TBC Power Consumption250 - 500W Movement Type Motorised Power Consumption Standby3W Speed TBC Power Supply Required 110V - 240V AC Mounting Patterns SupportedVESA 600, 400, 300 W x 600, 400, 300 H Power Consumption 250 - 500W Vertical Mounting Patterns PositioningMount holes in the bottom 115mm [4 1/2"] of the screen require a VOA Adaptor Power Consumption Standby 3W Control OptionsIR Remote, RS232, Contact Closure, RF Available Colour OptionsCustom RAL paint finishes Mounting Patterns Supported VESA 600, 400, 300 W x 600, 400, 300 H Package ContentsMechanism, IR remote control Control Options IR Remote, RS232, Contact Closure, RF Available Marine SuitableYes Colour Options Custom RAL paint finishes Outdoor SuitableNo (Marine Outdoor Option Available, see LSH-S-7-MO) Package Contents Mechanism, IR remote control Marine Suitable Yes Outdoor Suitable Yes TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

A 5mm Gap is recommended between the Base and the cabinet opening. B 53 1/8" 1350 Internal Enclosure Height LSH-S-7-MO Keep this area clear for MARINE OUTDOOR LIFT SYSTEM HEAVY WITH SWIVEL cable management system. GENERAL DIMENSIONS B 23 5/8" 600 Mount Slots 1 3/16" Screen Height + 20 [13/16"] 3 15/16" max. 30 100 max. 3/16" 3/16" Suggested 3 15/16" max. 5 5 Screen Depth Cabinet 100 max. The depth that the screen is Thickness Screen Depth larger than 100mm [3 15/16"] A must be added on to the depths B of the cabinet, base and top cap. Note: For screens that are larger than 100mm [3 15/16"] the depths of the enclosure, base and top panel must be C increased. Screen Height Screen Height Max. 880 [34 5/8"] Max. 1040 [40 15/16"] Removable cabinet front Min. 750 [29 1/2"] Min. 920 [36 1/4"] 53 1/8" 53 1/8" 1350 1350 for access for installation Internal Internal and servicing. Enclosure Enclosure Height Height Screen Width Screen Width 10 5/8" 270 12 1/16" 306 14 3/16" Mechanism 360 14 3/16" Depth Min. Internal B 360 Solid surface to Solid surface to Enclosure Depth SECTION A-A A Internal Enclosure Width = Min. Internal mount lift to. mount lift to. Internal Enclosure Width = MECH UP Screen Width + 100 [4"] Enclosure Depth Screen Width + 100 [4"] TECHNICAL SHEET SECTION A-A UK +44 (0) 1438 833577 US +1 (603) 742 9181 MECH DOWN ISSUE 001 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

1 15/16" 50 B Screen Width 1 3/16" 30 Suggested Cabinet LSH-S-7-MO Thickness B MARINE OUTDOOR LIFT SYSTEM HEAVY WITH SWIVEL APERTURE DETAILS

55 167 13/16" P P 0 6 9/16" 2 3/16" 0" + 55 [2 3/16"] 20 Aperture Depth Top Panel Top Panel Height B Screen Height The depth that the screen is Max. 880 [34 5/8"] 13/16" 1 3/16" SCREEN larger than 100mm [3 15/16"] Min. 750 [29 1/2"] 20 30 must be added on to the depths (Suggested) Cabinet Top Panel Cabinet Top 41 5/16" of the cabinet, base and top cap. Thickness 1050 Aperture Depth = Internal Screen Depth + 135 [5 5/16"] Enclosure (Minimum 235 [9 1/4"]) Height Recommended channel and rubber seals to prevent water ingress. Suitable drainage also required. DETAIL B Fixed Panel: Aperture Width = Screen Width + 60 [2 3/8"] A suggested top panel and floor surface construction based upon the (Box Enclosure: Aperture Width = Screen Width + 70 [2 3/4"]) dimensions shown on sheet 6. Solid surface to mount lift to. SCREEN Internal Enclosure Width = Screen Width + 100 [4"] B VIEWING SIDE TECHNICAL SHEET Top Panel UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 V WWW NET . . SHEET 5 FUTUREAUTOMATION W Recommended channel and rubber seals to prevent water ingress. Suitable drainage also required. DETAIL W SECTION V-V V

Page 6

LSH-S-7-MO MARINE OUTDOOR LIFT SYSTEM HEAVY WITH SWIVEL BASE PANEL AND TOP PANEL DETAILS Base thickness to be equal to or larger than the cabinet thickness. BASE PANEL Base Width = Aperture Width - 10 [3/8"] 1 3/16" 30 C L C 0" 0 Base Depth = 4 1/2" Aperture Depth - 10 [3/8"] 115 (Minimum 225 [8 7/8"]) 1 3/4" C VIEWING SIDE SECTION C-C R45 13/16" 20 Suggested tapered detail 3/16" 5 (Suggested) DETAIL E 3/16" TOP PANEL 9 1/16" 5 Top Panel Width = Aperture Width + 40 [1 9/16"] 230 C D L E 0" 0 2 3/16" Top Panel Depth = 55 Aperture Depth + 40 [1 9/16"] (Minimum 275 [10 13/16"]) 8 1/16" 205 D VIEWING SIDE SECTION D-D

0 0" NOTE: Changes to the top panel will affect

540 540 360 360 the suggested dimension shown on sheet 5. 21 1/4" 21 1/4" 14 3/16" 14 3/16" Recesses for top panel

mount brackets. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

LSH-S-7-MO MARINE OUTDOOR LIFT SYSTEM HEAVY WITH SWIVEL General Mitigations: FIXED PANEL - INTEGRATION CONSIDERATIONS • Activate hold-to-run/dead-man switch operation. Mitigation • Locate controls within direct line of sight of the mechanism. The cabinet top should be floating/ not permanently fixed to allow vertical movement if • Implement password or key switch protected operation. High Risk - Crushing Hazard Top Panel an obstruction is caught between it and the base Crush hazard between the top panel and the cabinet panel. top when the mechanism is closing. Mitigation Low Risk - Falling Objects Hazard The top panel is constructed to allow vertical Falling object hazard if objects are left on top movement in the presence of an obstruction, causing of the top panel. the mechanism to return to open again. Mitigation See general mitigations. Cabinet Top High Risk - Crushing Hazard Crush hazard at the cabinet aperture when the Low Risk - Impact Hazard mechanism is opening. Impact hazard around the mechanism when swivelling. Mitigation A Tapeswitch can be installed underneath the Mitigation base panel to detect any obstructions. Scan the Set swivel limits to prevent impact with QR code and navigate to the Cabinet Guidelines surrounding objects. See also general mitigations. document for further details. Base Panel Low Risk - Crushing Hazard Cables could be snagged if not properly managed High Risk - Crushing Hazard through and around the mechanism, causing Crush hazard below the mechanism when the damage to the mechanism and electronics. mechanism is closing. Mitigation Mitigation Ensure sufficient cable slack is allowed around Ensure the area below the mechanism is kept movement joints to prevent stretching and/or clear at all times when the mechanism is being damage to the cables and/or the mechanism. used. If installing or maintaining the mechanism do so with the mechanism turned off. The installer is responsible for conducting a site-specific risk assessment. Due to the unique conditions of each installation, Future Automation cannot provide an exhaustive list of all potential risks. Installers must ensure that all risks associated with installation, operation, and maintenance are identified and mitigated in accordance CONSIDERATIONS SHEET with applicable legislation and best practice. UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 Further safety and servicing guidance is available at: www.futureautomation.net/safety WWW NET . . SHEET 7 FUTUREAUTOMATION

Page 8

LSH-S-7-MO MARINE OUTDOOR LIFT SYSTEM HEAVY WITH SWIVEL BOX ENCLOSURE DETAILS Top Safety Panel Box Enclosure Base Panel For size specific box enclosures with further details, please see CAD. Maximum lifting capacity: 100kg [225lbs] Z - SERVO MOTOR Higher lifting capacity & faster operation. Base Panel (Not applicable to swivel) See LSHZ-S-MO Tech 8 1/16" 205 13/16" 20 Box Enclosure Base Side Panel Thickness F Removable panel to allow access to mount adjustment from the rear 740 Internal Box Enclosure Depth = 29 1/8" Box Enclosure Height = Screen Depth + 95 [3 3/4"] Screen Height + 20 [13/16"] 23 5/8" (Minimum 195 [7 11/16"]) Internal Box Enclosure Height = 600 Removable Panel Height Removable Panel Screen + Base Panel Height + 20 [13/16"] Width SECTION F-F Base Depth = Screen Depth + 115 [4 1/2"] 1" (Minimum 215 [8 7/16"]) 25 F Internal Box Enclosure Width = Screen Width + 10 [3/8"] TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 8 FUTUREAUTOMATION

Page 9

LSH-S-7-MO MARINE OUTDOOR LIFT SYSTEM HEAVY WITH SWIVEL BOX ENCLOSURE - BOX ENCLOSURE BASE AND TOP SAFETY PANEL DETAILS TOP PANEL For top panel dimensions, please see sheet 6. Base thickness to be equal to or larger than Base Panel the cabinet thickness. BOX ENCLOSURE BASE 13/16" Base Width = Screen Width + 10 [3/8"] 20 C L G 0" 0 3/8" Base Depth = 10 13/16" Screen Depth + 115 [4 1/2"] 20 (Minimum 215 [8 7/16"]) 6 7/8" 175 G SECTION G-G VIEWING SIDE

130 130 5 1/8" 5 1/8"

TOP SAFETY PANEL 13/16" 3 3/8" max. Top Safety Panel Width = Screen Width + 10 [3/8"] 20 85 max. C L 4x 12 1/2" THRU 0" 0 3/8" 10 2 1/8" 53.5 VIEWING SIDE

400 520 400 520 380 500 380 500 15 3/4" 20 1/2" 15 3/4" 20 1/2"

14 15/16" 19 11/16" 14 15/16" 19 11/16"

TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 9 FUTUREAUTOMATION

Page 10

LSH-S-7-MO MARINE OUTDOOR LIFT SYSTEM HEAVY WITH SWIVEL General Mitigations: BOX ENCLOSURE - INTEGRATION CONSIDERATIONS • Activate hold-to-run/dead-man switch operation. • Locate controls within direct line of sight of the mechanism. • Implement password or key switch protected operation. High Risk - Crushing Hazard Top Panel Crush hazard between the base panel and the cabinet top as the lift closes. Mitigation Low Risk - Falling Objects Hazard The top panel is constructed to allow vertical Falling object hazard if objects are left on top movement in the presence of an obstruction, causing of the top panel. the mechanism to return to open again. Mitigation See general mitigations. Box Enclosure Cabinet Top Low Risk - Crushing Hazard Crush hazard at the cabinet aperture when Low Risk - Impact Hazard mechanism is opening. Impact hazard around the mechanism when swivelling. Mitigation A Tapeswitch can be installed underneath the Mitigation base panel to detect any obstructions. Scan the Set swivel limits to prevent impact with QR code and navigate to the Cabinet Safety surrounding objects. See also general mitigations. document for further details. Base Panel Low Risk - Crushing Hazard Cables could be snagged if not properly managed High Risk - Crushing Hazard through and around the mechanism, causing Crush hazard below the mechanism when the damage to the mechanism and electronics. mechanism is closing. Mitigation Mitigation Ensure sufficient cable slack is allowed around Ensure the area below the mechanism is kept movement joints to prevent stretching and/or clear at all times when the mechanism is being damage to the cables and/or the mechanism. used. If installing or maintaining the mechanism do so with the mechanism turned off. The installer is responsible for conducting a site-specific risk assessment. Due to the unique conditions of each installation, Future Automation cannot provide an exhaustive list of all potential risks. Installers must ensure that all risks associated with installation, operation, and maintenance are identified and mitigated in accordance CONSIDERATIONS SHEET with applicable legislation and best practice. UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 Further safety and servicing guidance is available at: www.futureautomation.net/safety WWW NET . . SHEET 10 FUTUREAUTOMATION

Page 11

LSH-S-7-MO MARINE OUTDOOR LIFT SYSTEM HEAVY WITH SWIVEL SWIVEL DETAILS The LSH-S can swivel a full 180° in both the clockwise and counterclockwise direction. 180° Top Panel CCW hidden for clarity 180° Top Panel CW hidden for clarity TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 11 FUTUREAUTOMATION

Page 12

LSH-S-7-MO MARINE OUTDOOR LIFT SYSTEM HEAVY WITH SWIVEL CABLE ROUTING Screen cables should be routed through the cable management chain, under the beam and through the centre of the swivel pole up to the screen. Mechanism cables should be routed to the control box, which should be stored in a safe and accessible location. MECHANISM CABLES MAINS POWER SCREEN CABLES To external connections Control Box To mains power (110V or 240V AC) Power Supply Unit TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 12 FUTUREAUTOMATION

Page 13

3 CORE CABLE IR RECEIVER 3mm [0.12"] dia. EU SPEC: 0.12mm² US SPEC: 25AWG LSH-S-7-MO MARINE OUTDOOR LIFT SYSTEM HEAVY WITH SWIVEL CONTROL BOX DETAILS 12 3/8" 9 13/16" 315 250

170 FUTURE AUTOMATION 6 11/16"

UDC3 CONTROL BOARD POWER SUPPLY UNIT INPUT = 110V (6A) OR 240V (3A) AC MAINS OUTPUT = 24V DC, 21A CABLE LOOM LENGTH APPROX. 118 1/8" 3000 3 CORE CABLE IR RECEIVER 3mm [0.12"] dia. VIEW EU SPEC: 0.12mm² SCALE 1 : 2.5 3 CORE CABLE US SPEC: 25AWG MAINS SUPPLY 6mm [0.25"] dia. EU SPEC: 0.75mm² 3 CORE CABLE US SPEC: 18AWG MAINS SUPPLY 6mm [0.25"] dia. EU SPEC: 0.75mm² 3 CORE CABLE US SPEC: 18AWG LIFTING BEAM SWITCH LIMITS 2 CORE CABLE 6mm [0.25"] dia. LIFTING BEAM MOTOR EU SPEC: 0.5mm² 3 CORE CABLE 10mm [0.4"] dia. US SPEC: 20AWG LIFTING BEAM SWITCH LIMITS EU SPEC: 1.5mm² 6mm [0.25"] dia. US SPEC: 16AWG EU SPEC: 0.5mm² US SPEC: 20AWG NOTES • ENCLOSURE AND CABLE GLANDS RATED TO IP56. • ENCLOSURE AND LID FIXINGS ALL MADE FROM GEWISS GW PLAST 75. • C TO -25 C. ENCLOSURE MATERIAL SUITABLE FOR TEMPERATURES +60 • POWER SUPPLY UNIT (PSU) WILL ALLOW 110V OR 240V AC INPUT. THE SAME PSU IS USED FOR EU OR US MAINS SUPPLIES. 2 CORE CABLE • OTHER THAN CONTROL CABLES, ALL CABLES TERMINATE AT CONTROL BOARD VIA STANDARD PHOENIX CONNECTORS. LIFTING BEAM MOTOR • CABLE LOOM LENGTH SUPPLIED AT APPROX. 3m [118"]. LOOM CAN BE EXTENDED UP TO MAXIMUM OF APPROX. 10m [400"]. 10mm [0.4"] dia. • MINIMUM CABLE BEND RADIUS 25mm [1"]. EU SPEC: 1.5mm² US SPEC: 16AWG TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 13 FUTUREAUTOMATION