Future Automation HQA2 technical sheet

Page 1

HQA HEAVY QUAD ARM TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 006 WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

HQA HEAVY QUAD ARM SPECIFICATION MEASUREMENTS Product Dimensions 1128mm (44 7/16") x 1023mm (40 1/4") x 180mm (7 1/16") Maximum Weight Capacity 150Kg (330lb) Maximum Speed 30mm/s Maximum Extension From Wall 831mm (32 11/16") Depth From Wall 192mm (7 9/16") Product Weight 85Kg (187.4lb) Packaging Dimensions TBC Shipping Weight TBC - Both Ways (Screen Width Dependent) Maximum Rotation 75 Movement Type Motorised Power Supply Required 110V - 240V AC Power Consumption Max. 120W Power Consumption Standby 3W Mounting Patterns Supported VESA 1000, 900, 800, 600, 400 W x 600, 400, 300 H Control Options IR Remote, RS232, Contact Closure Product Options / Features Specific B&O and Loewe mounts / adapters, Custom RAL paint finishes, Marine suitable version Package Contents Mechanism, IR remote control Marine Suitable No TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 006 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

HQA HEAVY QUAD ARM Design Highlights MAXIMUM MECHANISM SWIVEL ANGLE Sophisticated electronics NOTE: USE OF LARGER SCREENS REDUCE THIS MAXIMUM ANGLE allow for a favourite viewing position to be programmed via the IR remote control.

The mechanism allows up to 831mm [32 11/16"] extension 180 7 1/16" of screen centre from wall.

The bracket can move parallel to the wall to initially take the screen out of a tight recess. The screen will then turn to the appropriate side up to a maximum of 75°, please note that larger screens reduce the maximum achievable swivel angle. Hook on removable uprights 75° allow the bracket to take a wide variety of screens. The arms on the right-hand side of the bracket are reserved to conceal all power and signal cables. 32 11/16" Available with Marine Lock to 831 safely lock bracket against Maximum Extension wall when not in viewing from Wall position. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 006 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

HQA HEAVY QUAD ARM Cable Management The HQA has removable arm covers on the inside faces that allow all cables to be run inside the arms of the mechanism to keep them out of sight. Cable enters here Cable exits here Removable covers on inside faces TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 006 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

HQA HEAVY QUAD ARM Overall Dimensions 44 7/16" 1128 9 13/16" 5/8" 250 16 31 3/4" 807 38 5/8" 981 27 7/16" 697

1023 1008 40 1/4"

39 11/16"

12 7/16" 317 30 3/16" 768 Maximum Vertical Mounting Distance 1 5/16" 33 0"

0 13 3/4" 350 785 30 7/8"

180 7 1/16"

2 1/2" 64 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 006 WWW NET . . SHEET 5 FUTUREAUTOMATION

Page 6

HQA HEAVY QUAD ARM Swivel Angles Examples below show the maximum swivel angles achieved based on differing srceen sizes.

98" SCREEN EXAMPLE 85" SCREEN EXAMPLE 6 14 1/4" 9/16"

55° 45° 75 7/16"

87 15/16"

1916 2233

TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 006 WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

HQA HEAVY QUAD ARM Recess Mounting In order to mount the HQA in a recess, a minimum of 10mm perimeter gap from the screen is required, also ensure adequate ventilation for tight recesses. When putting in recesses and using the bracket at the maximum angle, beware of obscuring part of the screen. With a deeper or wider screen the maximum angle will need to be reduced. 3/8" 10 MINIMUM A A 3/8" 10 MINIMUM RECESS DEPTH = SCREEN DEPTH + 190 [7.5] SECTION A-A TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 006 WWW NET . . SHEET 7 FUTUREAUTOMATION