Future Automation FSA2-WB technical sheet

Page 1

ISSUE 004 SHEET 1 of 7 Technical Sheet WB FSA2 - Wall Box for FSA2 DESIGN HIGHLIGHTS FUNCTION A wall box for mounting the • Adjustable tilt function FSA2 Mount in a recess to allow fo an ultra slim • Bi-directional swivel motion installation up to 90° • Stylish look and finish • Outer trim panel for neat SUITABILITY finish The WB FSA2 is suitable for • Cable knockout holes installation in 16"stud walls • Integrated cable The FSA2 mount is suitable for management screens with VESA 200 mount pattern. The FSA3 mount is suitable for screens from 26" up to 37" with a max weight of 15kg. SPECIFYING Check wall makeup to decide on fixings to be used. Check viewing angles and position for feasibility. Check screen details for mounting possibilities. CONTROL WARNING IMPORTANT Manual operation. It is the responsibility of the installer to make sure the product is safely secured to the wall or ceiling. Cable management is neatly organised and will not be obstructed or pinched by the bracket. www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565

Page 2

ISSUE 004 SHEET 2 of 7 Technical Sheet WB FSA2 - Wall Box for FSA2 ANGLED AT 45° FSA 2 DESIGN HIGHLIGHTS NOTE: LARGER SCREENS MAY The double arm design allows the screen to be fully moved away NOT ACHIEVE THIS ANGLE from the wall and rotated in both directions for multiple viewing angles. Ideal for installations in kitchens and bedrooms. IN POSITION WHEN INSTALLED IN WALL BOX 1.2 30 45°

ANGLED AT 90° NOTE: LARGER SCREENS MAY NOT ACHIEVE THIS ANGLE 17.4 442 MAXIMUM EXTENSION

www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565 90°

Page 3

ISSUE 004 SHEET 3 of 7 Technical Sheet WB FSA2 - Wall Box for FSA2 Cable Routing Using the integrated cable management on the FSA2 mount route the cable as shown ensuring sufficient slack at moving points. CABLE KNOCKOUT Use the knockout panels to pass the cables through the wall box into the wall cavity. FSA2 CABLE MANAGEMENT www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565

Page 4

ISSUE 004 SHEET 4 of 7 Technical Sheet WB FSA2 - Wall Box for FSA2 Wall Box Mounting Dimensions 13.9

354 3.7

95 6.0

152 3.0

76 14.8375 0.0

76 6.0

152 1.2

31 www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565

Page 5

ISSUE 004 SHEET 5 of 7 Technical Sheet WB FSA2 - Wall Box for FSA2 General Dimensions 15.0

381 17.3 440 MAXIMUM SCREEN 3.8

96 EXTENSION 0.04

15.8 402 0.9

28 3.5 90 SCREEN OFFSET FROM WALLBOX www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565

Page 6

ISSUE 004 SHEET 6 of 7 Technical Sheet WB FSA2 - Wall Box for FSA2 COVER PANEL SPACERS IN WALL BOX WALL TRIM STRIPS SNAP OUT GROMMET HOLES FOR CABLES CRESTRON MODULE COVER PANEL FSA2 MOUNT www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565

Page 7

ISSUE 004 SHEET 7 of 7 Technical Sheet WB FSA2 - Wall Box for FSA2 2.0 50.8

14.0

HORIZONTAL JOISTS 356 TO SECURE WALL BOX TO 4.0 101.6 MINIMUM 14.8

376 16.0 406 FIXING HOLES JOIST CENTRES INSERT WALL BOX INTO THE VOID AS SHOWN AND SECURE THROUGH SIDE FIXING HOLES www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565