Future Automation EAL-S technical sheet

Page 1

EAL-S ELECTRIC ADVANCE & LIFT WITH SWIVEL TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

EAL-S ELECTRIC ADVANCE & LIFT WITH SWIVEL SPECIFICATION MEASUREMENTS Screen Sizes (Approx.) 50"-80" Maximum Weight Capacity 50Kg (110lb) Depth From Wall 180mm (7 7/16") Maximum Extension From Wall 589mm (23 3/16") Maximum Lift from In Position 533mm (21") - Bi-Directional Maximum Rotation 47 Packaging Dimensions 840 x 750 x 270mm (33 1/16" x 29 1/2"x 10 5/8") Shipping Weight 25Kg (53lb) Movement Type Motorised Power Supply Required 110V - 240V AC Power Consumption Max. 120W Power Consumption Standby 3W Mounting Patterns Supported VESA 400, 300, 200 W x 400, 300, 200 H Control Options IR Remote, RS232, Contact Closure Product Options / Features Specific B&O and Loewe mounts / adapters, Custom RAL paint finishes Package Contents Mechanism, IR remote control Marine Suitable No TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

EAL-S ELECTRIC ADVANCE & LIFT WITH SWIVEL CABLE ROUTING The EAL's mounting allows for cables from the screen to be fed through the integrated cable management. This allows the cables to be stowed tidily within the mechanism. Screen and Mechanism cables should be routed to a control box behind the wall via an opening in the back of the wall or a conduit leading to it. NOTE: TURN THE MECHANISM OFF FROM THE MAINS WHEN ROUTING CABLES. THE EAD HAS A VERY POWERFUL MOTOR AND NO ANTI JAM FEATURE AVAILABLE! CABLE EXIT TO MAINS POWER 8 1/8" 2 1/16" 207 TECHNICAL SHEET 5 7/8" 52 UK +44 (0) 1438 833577 US +1 (603) 742 9181 150 ISSUE 004 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

EAL-S ELECTRIC ADVANCE & LIFT WITH SWIVEL POSITIONING AND MOVEMENT DETAILS MANTLE DEPTH 21" 533 WALL PLATE DEPTH BELOW MANTLE If the EAL is being recessed then the figure for mantle piece depth increases by the recess depth value. If the lower screen edge is not flush with the EAL wall plate (as shown in views right) then the wall plate height below the mantle increases by the offset amount. 7 1/16" 180 Due to mechanical tolerances between moving components, mechanisms may experience a level deviation of up to +/- 0.15deg between the in and out positions. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

EAL-S ELECTRIC ADVANCE & LIFT WITH SWIVEL POSITION ADJUSTMENT The EAL can be adjusted to fine tune the up and down positions. Refer to instructions for more information on switch adjustment. INCREASE LIFT TOWARD WALL AWAY FROM WALL LOOSEN BOLTS AND SLIDE IN B SLOTS TO ADJUST DECREASE LIFT DETAIL A DETAIL B A TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 5 FUTUREAUTOMATION

Page 6

EAL-S ELECTRIC ADVANCE & LIFT WITH SWIVEL GENERAL DIMENSIONS - IN 7 1/16" 12" 180 305 8 1/4" 210 29 15/16" 760 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

EAL-S ELECTRIC ADVANCE & LIFT WITH SWIVEL GENERAL DIMENSIONS - OUT Maximum achievable lift of 533mm [21"] Note: Any object, whether placed 11 1/2" 293 intentionally or accidentally within this area, may be damaged or cause damage to the mechanism. 20 1/2" 19 13/16" 520 503 8 1/4" 210 23 3/16" 18 5/16" 589 465 19 3/16" 487 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 7 FUTUREAUTOMATION

Page 8

EAL-S ELECTRIC ADVANCE & LIFT WITH SWIVEL SWIVEL ANGLE Positions can be preset to allow the mechanism to come out and swivel to a certain angle up to 45 degrees in either direction. The below views show the maximum swivel angle achievable assuming a mantle depth of 6". 65" Screen 55" Screen

6" 152

6" 152

48 3/4" 35° 42°

57 3/8"

1238 1457

75" Screen

6" 152

30° 66 1/4"

1682

TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 8 FUTUREAUTOMATION

Page 9

EAL-S ELECTRIC ADVANCE & LIFT WITH SWIVEL WALL PLATE DIMENSIONS 3/16" 5 C L SYM 7 1/16" 180 5 5/8" 143 8 1/4" C L 210 2 11/16" 68 1 3/16" 30 0" 0 6 5/16" 160 8 1/4" 210 10 1/4" 260 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 9 FUTUREAUTOMATION