Rako – WLED150CV1 – Wired – LED Dimmer
The WLED150CV1 is a single-channel constant voltage LED dimmer for use in a Rako wired system. It plugs into a RAK-LINK, or connects to the network elsewhere through a WK-CONNECT. Smaller loads go on the WLED75CV1.
£256.00 + VAT
Lead time circa 2–4 days
Special order, non-returnable
- Refurbished In-House
Components repaired or replaced where needed, then cleaned and bench tested.New, Box Opened
Unused surplus stock with opened packaging. This unit is sold untested. - Specification Help
Need help with specification or compatibility? Speak to our team.
Specification
Additional information
| Manufacturer | Rako |
|---|---|
| Range | Rako Wired |
| Model | WLED150CV1 |
| Type | LED Dimmer |
| Condition | New |
| Configuration / programming method | Initial setup & programming – Via Windows / MacOS programming software (Engineer required) / Tweaks to lighting scenes and levels – Via Windows / MacOS programming software (Engineer required). Or via iOS / Android app (By end user) |
| Number of controllable circuits | 1 |
| Controllable circuit types | Constant Voltage LED |
| Configurable minimum dimming levels | Yes |
| Configurable dimming fade speeds | Yes |
| Compatible with wall mounted keypads | Yes – A full range of wired and wireless keypads, with engraved scene buttons, available in multiple styles and finishes. Keypads sold separately. |
| Compatible with wireless infrared remotes | Yes – Infrared remotes sold separately |
| Compatible With 3rd Party Control Systems | Yes – Controllable with 3rd party control systems such as Savant, Crestron, Control 4, etc. Control systems sold separately. |
| Warranty | 2 years hardware warranty provided by Rosette Electrical |
| Control type | Constant Voltage LED |
| Load types | Constant Voltage LED |
| Minimum load | 1W |
| Maximum load | 12V DC – 150W; 24V DC – 300W |
| Input supply | Load – 12/24V DC; Rako Wired Network – 15V DC |
| Dimensions | 172x46x40mm |
| Weight | 175g |
| Housing | UL94-V-0 |
| Connections | Input – 2-way screw terminals; Output – 6-way screw terminals; Rako Wired network – RJ11 port |
| Terminal size | Solid – 4.0mm², Stranded – 2.5mm² |
| Protection | Reverse polarity input protection; Output current limit protection |
| Fuse | 10A blade fuse |
| Operating temperature | +2C to +40C |
| Humidity | +5% to 95% non-condensing |
| Communication | CAN bus |
| Standards | RoHS; UKCA, CE; EN 60669-2-5:2016 |
Specification Sheets & Documents
- Rako - WLED150CV1 - Technical SpecificationsView PDF: Rako - WLED150CV1 - Technical Specifications
- Rako - WLED150CV1 - Instruction ManualView PDF: Rako - WLED150CV1 - Instruction Manual
Not sure it’s the right part?
Speak to our in-house specialists about your system, we’ll help identify the part you need.
