Rako – WAVMI – Wired – System Accessories
The WAVMI is a five-input mains switching interface for a Rako wired system, which turns signals from equipment such as PIR sensors, fire alarms and gate controls into Rako commands. Each input can be configured to its own room or channel, with a command sent when the input is made or broken. The WAVFR is a similar interface for ten volt-free inputs.
£239.00 + VAT
Lead time circa 2–4 days
Special order, non-returnable
- Refurbished In-House
Components repaired or replaced where needed, then cleaned and bench tested.New, Box Opened
Unused surplus stock with opened packaging. This unit is sold untested. - Specification Help
Need help with specification or compatibility? Speak to our team.
Specification
Additional information
| Manufacturer | Rako |
|---|---|
| Range | Rako Wired |
| Model | WAVMI |
| Type | System Accessories |
| Condition | New |
| Configuration / programming method | Initial setup & programming – Via Windows / MacOS programming software (Engineer required) / Tweaks to lighting scenes and levels – Via Windows / MacOS programming software (Engineer required). Or via iOS / Android app (By end user) |
| Warranty | 2 years hardware warranty provided by Rosette Electrical |
| Input supply | Mains supply – 230V AC; Wired network – 15V DC via RAK-LINK |
| Dimensions | 190x105x66mm |
| Weight | 350g |
| Housing | UL94-V0 |
| Connections | Contact inputs – 5 x 4-way terminal; Mains supply – 3-way terminal; Punch down connector; RJ11 port |
| Operating temperature | +2C to +40C |
| Humidity | +5% to 95% non-condensing |
| Communication | CAN |
| Standards | RoHS; UKCA, CE; EN 60669-2-5:2016 |
Specification Sheets & Documents
- Rako - WAVMI - Technical SpecificationsView PDF: Rako - WAVMI - Technical Specifications
- Rako - WAVMI - Instruction ManualView PDF: Rako - WAVMI - Instruction Manual
Not sure it’s the right part?
Speak to our in-house specialists about your system, we’ll help identify the part you need.
