This document could not be shown here. Open the PDF.
Text of this document25 pages · 3,078 words
Page 1
product specifications 3691309g 08.14.26 Vierti Keypads Vierti keypads provide homeowners with a simple and elegant way to operate lights, shades / draperies, motorised screens, and many other devices. Hybrid keypads function as a dimmer or a switch and keypad combined into a single 1-Column, 4-Button 2-Column, device. Hybrid keypads are excellent for 4-Button / 4-Button retrofit applications because they eliminate the need to install two separate devices. Vierti keypads feature large, easy-to-use buttons with LEDs to aid in locating the keypad in low-light conditions. Non-configured keypads are available as bulk models and only include a mounting plate. Configured models include a mounting plate and personalised button kit. Predefined button kits, configured replacement button kits, and wallplates are purchased separately, and are available in Arctic White or Matte Black polymer finish. Wallplates are available in a variety of additional finishes, allowing the colour to complement the aesthetics of a space. Keypad markings are important for programming and use of the keypads when installed. The marking colour has been Keypads include a construction cover that chosen for increased readability, with default provides protection against damage from markings available as standard product construction debris for the button kits. The offerings. Custom personalised button kits cover also allows for viewing and operation can be designed to describe its programming of the keypad buttons while in place and is using myProjects, Lutron Designer, or the replaced by the wallplate when construction Vierti personalisation form has been completed. (engraving.lutron.com/Vierti). Personalised replacement button kits can Only use with Lutron Vierti wallplates. be changed in the field after installation. Wallplates are sold separately. This allows for the keypad to be changed Note: Additional button configurations can be to a variety of button configurations and found in the Button Configurations section personalised markings. starting on page 19. Customer Assistance: www.lutron.com/RA3support 1 +44(0)20.7702.0657 (Europe)
Page 2
product specifications 3691309g 08.14.26 Vierti Keypads Model Numbers Bulk Keypads (Includes bulk keypad with Description mounting plate and construction cover) RRE-HDS-1 RA3 hybrid keypad square 1-column bulk RRE-WSS-1 RA3 keypad square 1-column bulk RRE-HDS-2 RA3 hybrid keypad square 2-column bulk RRE-WSS-2 RA3 keypad square 2-column bulk Configured Base Keypads (Includes bulk keypad with mounting plate, personalised button kit, and Description construction cover) RR-WS 1-column configured keypad RR-HD 1-column configured hybrid keypad RR-WS-2 2-column configured keypad RR-HD-2 2-column configured hybrid keypad Predefined Button Kits Description C1BK-2BXX 1 2 -YY 1-column, 2-button 1 2 C1BK-3RXX -YY 1-column, 3-button with raise / lower 1 2 C1BK-4BXX -YY 1-column, 4-button 1 2 2-column: Left column: 4-button C2BK-4RXX -YY Right column: 3-button with raise / lower 1 2 2-column: Left column: 4-button C2BK-42XX -YY Right column: 2-button Configured Replacement Button Kit Description C1BK 1-column personalised replacement button kit C2BK 2-column personalised replacement button kit Wallplates Description LW-S-C1-XX 1 1-gang, 1-column wallplate LW-S-C11-XX 1 2-gang, 1-column wallplate at 60 mm on-centre spacing LW-S-C2-XX 1 1-gang, 2-column wallplate Note: See page 3 for specification information. 1 “XX” in the model number represents the colour / finish code. See Colours and Finishes options on page 25. 2 “YY” in the model number represents the engraving code. See Button Text / Icons section starting on page 21. Customer Assistance: www.lutron.com/RA3support 2 +44(0)20.7702.0657 (Europe)
Page 3
product specifications 3691309g 08.14.26 Vierti Keypads Specifications Power 220 – 240 V~ 50 / 60 Hz Power Consumption 0.5 W typical, 1.5 W Max Regulatory CE, UKCA, RoHS Compliant, WEEE Certified, REACH Compliant, Approvals ETSI EN 300 220-2, ETSI 301 489-1 Compliant, IEC / EN 60669-2-1:2021, CB Certified Environment Ambient operating temperature: 0 °C to 40 °C, 0% to 90% humidity, non-condensing. Indoor use only. IP20 rated. Communications Vierti keypads communicate with the system through Clear Connect – Type X Radio Frequency (RF) and must be located within 23 m of the centrally located wireless processor. There must be a minimum of two Clear Connect – Type X devices within 6 m of the wireless processor. Each Vierti keypad should be within 6 m of at least two other non-battery powered Clear Connect – Type X devices. Using more than two devices is ideal for creating an ultra high-performance mesh network. System devices operate on a radio frequency of 2.4 GHz. For myLutron users, please see Lutron Application Note #842 (P / N 048842) for additional information on Clear Connect – Type X best practices at www.lutron.com/europe ESD Protection Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2. Surge Protection Tested to withstand surge voltages without damage or loss of operation, in accordance with IEC 61000-4-5. Power Failure Power failure memory: Should power be interrupted, the keypad will return to its previous state when power is restored. Mounting Square Single gang: Requires a square backbox. 35 mm deep minimum. 47 mm Backbox depth recommended. 2-gang: Requires a standard UK double backbox with 120 mm fixing centres. 35 mm deep minimum. 47 mm depth recommended. Wiring Vierti keypads require a 220 – 240 V~ live and neutral connection. Vierti 1, and dimmed live hybrid keypads require a 220 – 240 V~ live, neutral 2 2 connection. All keypads accept wire gauges between 0.5 mm to 2.5 mm (20 AWG to 14 AWG). One wire per terminal. Limited Warranty www.lutron.com/warranty or call 1.844.LUTRON1 (USA/Canada) or 610.282.3800 (Others) for a printed copy. 1 For additional information, refer to the Hybrid Keypad: Load Type and Capacity section on page 10. Customer Assistance: www.lutron.com/RA3support 3 +44(0)20.7702.0657 (Europe)
Page 4
product specifications 3691309g 08.14.26 Vierti Keypads Design Features • At the press of a single button, lights fade ON or OFF to desired levels and shades / draperies open or close to desired positions. • Ligh t levels and shade / drapery positions can be fine-tuned by pressing and holding the raise / lower buttons. • Programmable to select scene or room preset levels or positions. • Adjustable intensity of the status LED is accomplished through system level programming. • Configurable raise / lower selection using programming software. – Last button pressed (default) - devices controlled by the last button pressed will raise / lower. – Programmed devices - only the devices programmed to the button will raise / lower. Hybrid-Only Design Features • In ternal dimmer is controlled by the keypad buttons to verify proper installation prior to system programming. • In ternal dimmer can be assigned to any button on the hybrid keypad and can be programmed to be controlled by any keypad. • Advanced dimming technology designed for compatibility with a broader range of high-efficiency bulbs. • Pr ogrammable high-end and low-end trim settings to customise the dimming range and optimise LED compatibility. • See Hybrid Keypad: Load Type and Capacity section on page 10. • Internal dimmer can be operated as a switched output through the use of the design GUI. Customer Assistance: www.lutron.com/RA3support 4 +44(0)20.7702.0657 (Europe)
Page 5
product specifications 3691309g 08.14.26 Vierti Keypads Dimensions All dimensions are shown as mm 1-Column UK Square Box Front View Side View 90.2 90.2 3 28 2-Column UK Square Box Front View Side View 90.2 90.2 3 28 Customer Assistance: www.lutron.com/RA3support 5 +44(0)20.7702.0657 (Europe)
Page 6
product specifications 3691309g 08.14.26 Vierti Keypads Dimensions (continued) All dimensions are shown as mm 2-Gang, 1-Column Front View UK Square Box Side View 90.2 150.2 3 28 Customer Assistance: www.lutron.com/RA3support 6 +44(0)20.7702.0657 (Europe)
Page 7
product specifications 3691309g 08.14.26 Vierti Keypads Flush Mounting All dimensions are shown as mm Square Style WWallplaallplattee WWallall 3 Note: A square, flangeless backbox (Lutron P/N EBB-1-SQ or similar style) is recommended for the most flush installation possible. Flanged square backboxes may also be used for retrofit applications or to meet local standards. Square backboxes with no flanges must be installed with the box sides at a minimum depth of flush and maximum depth of 19 mm from the wall surface for best possible installation. Customer Assistance: www.lutron.com/RA3support 7 +44(0)20.7702.0657 (Europe)
Page 8
product specifications 3691309g 08.14.26 Vierti Keypads Parts Identification Square Style 1-Column Backbox2 Bulk Keypad with Mounting Plate Button Kit1 Construction Cover3 Wallplate2 Configured Base Keypad Square Style 2-Column Backbox2 Bulk Keypad with Mounting Plate Button Kit1 Construction Cover3 Wallplate2 Configured Base Keypad 1 The button kit is included with the configured base keypad. It needs to be purchased separately when the bulk keypad is purchased in distribution. 2 The wallplate and required backbox are sold separately. They are not included with the product. 3 Important: The construction cover must remain in place until the wallplate is installed. The construction cover must be removed in order to install the button kit and wallplate. Buttons can be used while construction cover is on, before wallplate is installed. Customer Assistance: www.lutron.com/RA3support 8 +44(0)20.7702.0657 (Europe)
Page 9
product specifications 3691309g 08.14.26 Vierti Keypads Parts Identification (continued) Square Style 2-Gang, 1-Column Backbox2 Mounting Plate4 Bulk Keypads Mounting Plate Screws4 Mounting Screws Button Kits1 Construction Covers3 Wallplate2 Configured Square Backbox Base Keypads 1 The button kits are included with the configured base keypads. 2 The wallplate and required backbox are sold separately. They are not included with the product. 3 Important: The construction covers must remain in place until the wallplate is installed. The construction covers must be removed in order to install the wallplate. Buttons can be use while construction covers are on, before wallplate is installed. 4 The mounting plate and its associated screws are included with the wallplate. Customer Assistance: www.lutron.com/RA3support 9 +44(0)20.7702.0657 (Europe)
Page 10
product specifications 3691309g 08.14.26 Vierti Keypads Hybrid Keypad: Load Type and Capacity Minimum Load Neutral Connection Model With Without Maximum Number Voltage Load Types Neutral Neutral Load Dimming Switching LED * 0 W 10 W 1 A 150 W Preferred ELV with LEDs 10 W - 250 W Required RRE-HDS-1 ELV with 10 W - 250 W Required RRE-HDS-2 220 – 240 V~ Inc. / Hal. Required RR-HD 50 / 60 Hz Inc. / Hal. 0 W 10 W 250 W Preferred RR-HD-2 PHPM-PA-CE 1 interface - 3 interfaces Required GRX-TVI 1 interface - 3 interfaces Required * LED rating is 1 A. If no current rating is specified on the LED lamp, a power rating of 150 W can be used. Note: Do not install hybrid keypads to control sockets or motor-operated appliances. Customer Assistance: www.lutron.com/RA3support 10 +44(0)20.7702.0657 (Europe)
Page 11
product specifications 3691309g 08.14.26 Vierti Keypads Keypad Operation Status LEDs Keypad Buttons Raise / Lower Buttons Status LEDs • Show which keypad button has been activated. • Pressed (active) button LEDs are brighter than other buttons. Keypad Buttons • Press to activate desired levels or positions. – This behaviour is programmable in the system software. Raise / Lower Buttons • Press to raise / lower desired levels. Customer Assistance: www.lutron.com/RA3support 11 +44(0)20.7702.0657 (Europe)
Page 12
product specifications 3691309g 08.14.26 Vierti Keypads Hybrid Keypad Operation Local Load Control Status LEDs Keypad Buttons Raise / Lower Buttons Status LEDs • Show which keypad button has been activated. • Pressed (active) button LEDs are brighter than other buttons. Keypad Buttons • Press to activate desired levels or positions. – This behaviour is programmable in the system software. Local Load Control • Left-most column on a device provides local control of internal dimmer or switch for control of light / shade prior to programming. • Default operation depends on the button configuration (model number): – 2B: Top button is ON, bottom button is OFF – 3RL (Switching): Top button is ON, the next button is ON, the next button is OFF, and the buttons at the bottom have no action – 3RL (Dimming): Top button is ON, the next button is 50%, the next button is OFF, and the buttons at the bottom raise and lower the lights – 4B (Dimming): Top button is ON, the next button is 50%, and the next two buttons are OFF – 4B (Switching): Top three buttons are ON, the bottom buttons are OFF Raise / Lower Buttons • Press to raise / lower desired levels. Note: The right column of the 2-column hybrid keypad has no default operations. Its button LED flashes for 3 seconds when pressed and activates only after system commissioning. Customer Assistance: www.lutron.com/RA3support 12 +44(0)20.7702.0657 (Europe)
Page 13
product specifications 3691309g 08.14.26 Vierti Keypads Keypad: Wiring Diagram Square Style Backbox N = Neutral Breaker L = Live = Earth L N Customer Assistance: www.lutron.com/RA3support 13 +44(0)20.7702.0657 (Europe)
Page 14
product specifications 3691309g 08.14.26 Vierti Keypads Hybrid Keypad Models: Wiring Diagram for Square Style Backbox With neutral (dimming or switching mode): N = Neutral Breaker Load L = Live = Earth = Controlled Output L N N Without neutral (dimming mode only): N = Neutral Breaker Load L = Live = Earth = Dimmed Live N N L Note: See Hybrid Keypad: Load Type and Capacity section on page 10. Customer Assistance: www.lutron.com/RA3support 14 +44(0)20.7702.0657 (Europe)
Page 15
product specifications 3691309g 08.14.26 Vierti Keypads How to Build a Non-Configured Model Number Bulk Keypads Note: Bulk keypads do not come with a wallplate or button kit. A mounting plate is included with the bulk keypad unit. RRE – S – System Type Number of Columns RR: RadioRA 3 1: 1-Column 2: 2-Column Keypad Type Backbox Shape WS: Keypad S: Square Style HD: Hybrid Keypad Customer Assistance: www.lutron.com/RA3support 15 +44(0)20.7702.0657 (Europe)
Page 16
product specifications 3691309g 08.14.26 Vierti Keypads How to Build a Single Gang Wallplate Kit Model Number LW – S – – Family Colours and Finishes LW: Vierti Wallplate Kit Polymer Finishes AW: Arctic White BL: Matte Black Ganging S: Single Gang Metal Finishes AB: Aged Brass AZ: Aged Bronze BC: Bright Chrome Gangs and Openings BRB: Brushed Brass C1: 1-Gang, 1-Column Wallplate CP: Champagne C2: 1-Gang, 2-Column Wallplate GP: Graphite SN: Satin Nickel Customer Assistance: www.lutron.com/RA3support 16 +44(0)20.7702.0657 (Europe)
Page 17
product specifications 3691309g 08.14.26 Vierti Keypads How to Build a Multigang Wallplate Kit Model Number LW – S – C11 – Family Colours and Finishes LW: Vierti Wallplate Kit Polymer Finishes AW: Arctic White BL: Matte Black Wallplate Option Metal Finishes S: 60 mm on-centre spacing* AB: Aged Brass AZ: Aged Bronze BC: Bright Chrome BRB: Brushed Brass Gangs and Openings CP: Champagne C11: 2-Gang, 1-Column Wallplate GP: Graphite SN: Satin Nickel *Available for 1-column only. Customer Assistance: www.lutron.com/RA3support 17 +44(0)20.7702.0657 (Europe)
Page 18
product specifications 3691309g 08.14.26 Vierti Keypads How to Build a Predefined Button Kit Model Number C BK – – Family Button Text / Icons C: Vierti Button Kit 1-Column L1: Light Levels L2: Time of Day Number of Columns 2-Column 1: 1-Column L1S1: Light Levels / Shade Levels 2: 2-Column L2S1: Time of Day/ Shade Levels* Button Configurations Colours and Finishes 1-Column Polymer Finishes 2B: 2-Button AW: Arctic White 3R: 3-Button with Raise / Lower BL: Matte Black 4B: 4-Button 2-Column 42: 4-Button / 2-Button 4R 4-Button / 3-Button with Raise / Lower * Available in Button Configuration 42 only. Customer Assistance: www.lutron.com/RA3support 18 +44(0)20.7702.0657 (Europe)
Page 19
product specifications 3691309g 08.14.26 Vierti Keypads Button Configurations 1-Column 2-button (2B) 3-button with 4-button (4B) Raise / Lower (3R) 2-Column 2-button / 2-button (22)* 2-button / 3-button with 2-button / 4-button (24)* Raise / Lower (2R)* 3-button with Raise / Lower / 3-button with Raise / Lower / 3-button with Raise / Lower / 2-button (R2)* 3-button with Raise / Lower (RR)* 4-button (R4)* * Available in personalised version only. Customer Assistance: www.lutron.com/RA3support 19 +44(0)20.7702.0657 (Europe)
Page 20
product specifications 3691309g 08.14.26 Vierti Keypads Button Configurations (continued) 2-Column (continued) 4-button / 2-button (42) 4-button / 3-button with 4-button / 4-button (44)* Raise / Lower (4R) * Available in personalised version only. Customer Assistance: www.lutron.com/RA3support 20 +44(0)20.7702.0657 (Europe)
Page 21
product specifications 3691309g 08.14.26 Vierti Keypads Button Text / Icons Lutron Defined (default, predefined button kits only) Default marking icons shown below. L1: Light Levels On Bright Bright Low Medium Off Off Low Off L2: Time of Day Morning Morning Evening Afternoon Off Evening Off Customer Assistance: www.lutron.com/RA3support 21 +44(0)20.7702.0657 (Europe)
Page 22
product specifications 3691309g 08.14.26 Vierti Keypads Button Text / Icons (continued) Lutron Defined (default, predefined button kits only) Default marking icons shown below. Bright Open Bright Open Morning Open Medium Medium Favourite Afternoon Low Close Low Close Evening Close Off Off Off L1S1 L1S1 L2S1 Light Levels Shade Levels Light Levels Shade Levels Time of Day Shade Levels Personalisation Final personalisation to be specified in myProjects, Lutron Designer, or the Vierti personalisation form. Visit engraving.lutron.com/Vierti for personalisation options. Personalisation must be defined at the time of order. Note: Orders cannot be processed until personalisation details are received. Customer Assistance: www.lutron.com/RA3support 22 +44(0)20.7702.0657 (Europe)
Page 23
product specifications 3691309g 08.14.26 Vierti Keypads Mounting A square, flangeless backbox (Lutron part number EBB-1-SQ or similar style) is recommended for the most flush installation possible. Flanged square backboxes may also be used for retrofit applications or to meet local standards. Square backboxes with no flanges must be installed with the box sides flush with or slightly inset to the wall surface. Note: Wallplate will not be flush to the wall when using flanged backboxes. Square Style (Square Backbox) 1-Gang, 1-Column Vertical mounting holes are not compatible with square backbox installations. Please do not use. Note: Use Lutron part number EBB-1-SQ if a backbox is needed for the project. This backbox is 74 mm x 74 mm x 47 mm. 1-Gang, 2-Column Vertical mounting holes are not compatible with square backbox installations. Please do not use. Note: Use Lutron part number EBB-1-SQ if a backbox is needed for the project. This backbox is 74 mm x 74 mm x 47 mm. Customer Assistance: www.lutron.com/RA3support 23 +44(0)20.7702.0657 (Europe)
Page 24
product specifications 3691309g 08.14.26 Vierti Keypads Mounting (continued) Square Style (Square Backbox) (continued) 2-Gang, 1-Column Note: Button configurations can be mixed and matched to achieve up to 9 possible combinations. The 2-gang mounting plate is included with the 2-gang, 1-column wallplate. Customer Assistance: www.lutron.com/RA3support 24 +44(0)20.7702.0657 (Europe)
Page 25
product specifications 3691309g 08.14.26 Vierti Keypads Colours and Finishes Polymer Finishes Metal Finishes (wallplates only) Arctic White Matte Black Aged Brass Aged Bronze Bright Chrome Brushed Brass AW BL AB AZ BC BRB Champagne Graphite Satin Nickel CP GP SN • Aged Brass and Aged Bronze finishes are produced using a handcrafted process which introduces a unique variation in both the hue and the graining. There will be natural variation from unit to unit. • Due to printing limitations, colours and finishes shown cannot be guaranteed to perfectly match actual product colours. • Keychains are available for more precise colour matching (Metal Finishes only): - Signature Metal Chip Kit Demo: SM-CK-DEMO Lutron, Clear Connect, RadioRA 3, Vierti, and any related trade dress and logos are trademarks or registered trademarks of Lutron Electronics Co., Inc. in the US and/or other countries. All other product names, logos, and brands are property of their respective owners. Customer Assistance: www.lutron.com/RA3support 25 +44(0)20.7702.0657 (Europe)
Need assistance or looking to source this item?