Rako DIN-4C Technical Specifications

Page 1

Datasheet DIN-4C 4-Channel Blind Controller Module Overview Specification The DIN-4C is a four-channel relay switching module for controlling curtain and blind motors. Mechanical W157xH110xD59mm Dimensions Each output on the DIN-4C can be configured in Rasoft Pro to be controlled individually, or grouped depending on the Width = 9 DIN Modules application. Weight 275g Mounting Top Hat DIN Rail IEC/EN 60715 Once configured in Rasoft Pro, the DIN-4C is controllable by Rako Wired Keypads such as the WK-MOD and WCM. Vertical Clearance 150mm The DIN-4C can be controlled using Rako Wireless Keypads DIN Bus: 0.5–1.5mm² (20–15 AWG) such as the RK-MOD and RNC when used in conjunction Cable Size Input/Load: 1.0–2.5mm² (17–13 AWG) with a WK-HUB or WRB100. DIN Bus - 4 way screw terminal Terminals Relay Outputs - Push terminal Connections Electrical Protection Over temperature protection Motorised curtains, screens and blinds providing open, stop, close Typical Loads functionality as defined by IEC/EN 60669-2-1. Maximum Load 1.5A/Channel RoHS Certification & Standards UKCA, CE EN 60669-2-5 Communication DIN Bus (DPU Usage: 8) Environmental Operating Temperature +2 °C to +40 °C Temperature +2C to +40C Climate Range Humidity +5% to 90% non condensing Dimensions Installation and Setup For information on installing and setting up the DIN-4C, see the Instruction Manual. Document Version 1.0.0 telephone +44 (0) 1634 226666 | www.rakocontrols.com Specifications and data are subject to change without notice. © 2025 Rako Controls Ltd