Lutron International seeTouch QS Wallstations (QSWE) – Specification Submittal (369273e)

Page 1

International Wallstations 369273e 1 02.22.24 Color and Engraving Codes LEDs QSWE-2BN-___-___ QSWE-2BI-___-___ 2-Button Wallstation 1 Description Off • Often used in entryways to select Scene 1 and Off. Engraving • Large, rounded buttons are easy to use. • Backlit buttons with optional engraving make it easy to find and operate the Wallstation in low light conditions. • Optional button engraving is angled up to the eye for QSWE-2BN-AW-EGN easy reading. (Non-insert version) • The LEDs next to each button are used during programming and provide feedback when the buttons are pressed. • R eceives up to two contact closure inputs via a connector on the back of the Wallstation. QSWE-2BI-AW (Insert version) SPECIFICATION SUBMITTAL Page 1 Job Name: Model Numbers: Job Number:

Page 2

International Wallstations 369273e 2 02.22.24 Color and Engraving Codes LEDs QSWE-3BN-___-___ QSWE-3BI-___-___ 3-Button Wallstation 1 Description 2 • Often used to select scenes. Off • Large, rounded buttons are easy to use. Engraving • Backlit buttons with optional engraving make it easy to find and operate the Wallstation in low light conditions. • Optional button engraving is angled up to the eye for QSWE-3BN-AW-EGN easy reading. (Non-insert version) • The LEDs next to each button are used during programming and provide feedback when the buttons are pressed. • R eceives up to two contact closure inputs via a connector on the back of the Wallstation. QSWE-3BI-AW (Insert version) SPECIFICATION SUBMITTAL Page 2 Job Name: Model Numbers: Job Number:

Page 3

International Wallstations 369273e 3 02.22.24 Color and Engraving Codes LEDs QSWE-4BN-___-___ QSWE-4BI-___-___ 4-Button Wallstation Description • Often used to select scenes; often to select between 3 scenes and Off. • Large, rounded buttons are easy to use. • Backlit buttons with optional engraving make it easy to find and operate the Wallstation in low light conditions. QSWE-4BN-AW • Optional button engraving is angled up to the eye for (Non-insert version) easy reading. • The LEDs next to each button are used during programming and provide feedback when the buttons are pressed. • Receives up to two contact closure inputs via a 3 connector on the back of the Wallstation. 1 2 Off Engraving QSWE-4BI-AW-EGN (Insert version) SPECIFICATION SUBMITTAL Page 3 Job Name: Model Numbers: Job Number:

Page 4

International Wallstations 369273e 4 02.22.24 Color and Engraving Codes LEDs QSWE-5BRLN-___-___ QSWE-5BRLI-___-___ 5-Button Wallstation with 1 Raise / Lower 2 Scene 3 Selection 4 Buttons Description Off Engraving • Often used to select and adjust scenes. • Large, rounded buttons are easy to use. Master Raise / Lower • Backlit buttons with optional engraving make it easy to find and operate the Wallstation in low light QSWE-5BRLN-AW-EGN conditions. (Non-insert version) • Optional button engraving is angled up to the eye for easy reading. • The LEDs next to each button are used during programming and provide feedback when the buttons are pressed. Open • Master raise / lower brightens or dims all lighting or Preset 1 raises / lowers all assigned shades in the last selected Preset 2 scene or toggled group. Preset 3 • S hade control features (E01 engraving): Close - Can control Sivoia QS Window Treatments. - Pressing the Open (or Close) button once will cause the window treatments to move to their fully open (or closed) position. Tap any button (regardless of function) to stop a shade that is in motion. QSWE-5BRLI-AW-E01 - Three (3) programmable preset buttons. (Insert version) • R eceives up to two contact closure inputs via a connector on the back of the Wallstation. SPECIFICATION SUBMITTAL Page 4 Job Name: Model Numbers: Job Number:

Page 5

International Wallstations 369273e 5 02.22.24 Color and Engraving Codes LEDs QSWE-5BRLIRN-___-___ QSWE-5BRLIRI-___-___ 1 5-Button Wallstation with 2 Scene Infrared Receiver and Raise / Lower 3 Selection Buttons Description 4 Off Engraving • Often used to select and adjust scenes. • Large, rounded buttons are easy to use. IR Window • Backlit buttons with optional engraving make it easy to find and operate the Wallstation in low light Master Raise / Lower conditions. QSWE-5BRLIRN-AW-EGN • Optional button engraving is angled up to the eye for (Non-insert version) easy reading. • The LEDs next to each button are used during programming and provide feedback when the buttons are pressed. • Master raise / lower brightens or dims all lighting or Open raises / lowers all assigned shades in the last selected Preset 1 scene or toggled group. • S hade control features (E01 engraving): Preset 2 - Can control Sivoia QS Window Treatments. Preset 3 - Also controls shades with wireless IR controllers Close SVQ-3PIT, SVQ-OCIT, SVQ-4GD-OCIT, and SVQ-4S2G-IT. - Pressing the Open (or Close) button once will cause the window treatments to move to their fully open QSWE-5BRLIRI-AW-E01 (or closed) position. Tap any button (regardless of (Insert version) function) to stop a shade that is in motion. - Three (3) programmable preset buttons. • R eceives up to two contact closure inputs via a connector on the back of the Wallstation. SPECIFICATION SUBMITTAL Page 5 Job Name: Model Numbers: Job Number:

Page 6

International Wallstations 369273e 6 02.22.24 Color and Engraving Codes LEDs QSWE-6BRLN-___-___ QSWE-6BRLI-___-___ Dual Wallstation with 3-Button Group 1 Open and 3-Button with Raise / Lower Group 2 Preset Description Engraving Group 3 Close • Often used to control one or more lighting or window treatment zones simultaneously. • Large, rounded buttons are easy to use. Raise / Lower • Backlit buttons with on-button engraving make it easy to find and operate the Wallstation in low light QSWE-6BRLN-AW-E01 conditions. (Non-insert version) • Optional button engraving is angled up to the eye for easy reading. • The LEDs next to each button are used during programming and provide feedback when the buttons are pressed. 1 Open • S hade control features (E01 engraving): - Often used to select three different groups of 2 Preset shades using Open, Close, and Raise / Lower. - Used to control multiple groups of shades Off Close independently from a single-gang keypad (e.g., a window with a sheer shade and a blackout shade). - Can control Sivoia QS Window Treatments. - Pressing the Open (or Close) button once will cause the window treatments to move to their fully open QSWE-6BRLI-AW-EGN (or closed) position. Tap any button (regardless of (Insert version) function) to stop a shade that is in motion. - One (1) programmable preset button. • R eceives up to two contact closure inputs via a connector on the back of the Wallstation. SPECIFICATION SUBMITTAL Page 6 Job Name: Model Numbers: Job Number:

Page 7

International Wallstations 369273e 7 02.22.24 Color and Engraving Codes LEDs QSWE-7BRLN-___-___ QSWE-7BRLI-___-___ 1 7-Button Wallstation with 1 2 Raise / Lower Scene 3 Selection Off 4 Buttons Description Off • Often used to select and adjust scenes. Engraving • Large, rounded buttons are easy to use. • Backlit buttons with optional engraving make it easy to Master Raise / Lower find and operate the Wallstation in low light conditions. • Optional button engraving is angled up to the eye for QSWE-7BRLN-AW-EGN easy reading. (Non-insert version) • The LEDs next to each button are used during programming and provide feedback when the buttons are pressed. • Master raise / lower brightens or dims all lighting or Open raises / lowers all assigned shades in the last selected Group 1 Preset 1 scene or toggled group. Preset 2 • Functions as two independently programmable Group 2 Preset 3 controllers. Left column mimics a 2-button column Close and right column mimics a 5-button column. Wallstation can control two lighting zones, two shade groups, or one of each. Or can function as one shade group control where the right keypad controls the group of shades indicated by the left keypad. QSWE-7BRLI-AW-E01 • S hade control features (E01 engraving): (Insert version) - Used to control multiple groups of shades independently from a single-gang keypad (e.g., a window with a sheer shade and a blackout shade). - Can control Sivoia QS Window Treatments. - Pressing the Open (or Close) button once will cause the window treatments to move to their fully open (or closed) position. Tap any button (regardless of function) to stop a shade that is in motion. - Three (3) programmable preset buttons. • Receives up to two contact closure inputs via a connector on the back of the Wallstation. SPECIFICATION SUBMITTAL Page 7 Job Name: Model Numbers: Job Number:

Page 8

International Wallstations 369273e 8 02.22.24 Color and Engraving Codes LEDs QSWE-8BRLN-___-___ QSWE-8BRLI-___-___ 8-Button Wallstation with 1 Open Raise / Lower Preset 1 Scene 2 Preset 2 Selection Preset 3 Buttons Description Off Close • Often used to select and adjust scenes. Engraving • Large, rounded buttons are easy to use. • Backlit buttons with optional engraving make it Master Raise / Lower easy to find and operate the Wallstation in low light conditions. QSWE-8BRLN-AW-EGN • Optional button engraving is angled up to the eye for (Non-insert version) easy reading. • The LEDs next to each button are used during programming and provide feedback when the buttons are pressed. Group 1 Open • Master raise / lower brightens or dims all lighting or Preset 1 raises / lowers all assigned shades in the last selected Group 2 Preset 2 scene or toggled group. Preset 3 • Functions as two independently programmable controllers. Left column mimics a 3-button column Group 3 Close and right column mimics a 5-button column. Wallstation can control two lighting zones, two shade zones, or one of each. Or can function as one shade group control where the right keypad controls the QSWE-8BRLI-AW-E01 group of shades indicated by the left keypad. (Insert version) • Shade control features (E01 engraving): - U sed to control multiple groups of shades independently from a single-gang keypad (e.g., a window with a sheer shade and a blackout shade). - C an control Sivoia QS Window Treatments. - P ressing the Open (or Close) button once will cause the window treatments to move to their fully open (or closed) position. Tap any button (regardless of function) to stop a shade that is in motion. - T hree (3) programmable preset buttons. • Receives up to two contact closure inputs via a connector on the back of the Wallstation. SPECIFICATION SUBMITTAL Page 8 Job Name: Model Numbers: Job Number:

Page 9

International Wallstations 369273e 9 02.22.24 Color and Engraving Codes LEDs QSWE-8BRLIRN-___-___ QSWE-8BRLIRI-___-___ 1 Open 8-Button Wallstation with Preset 1 Scene Infrared Receiver and Raise / Lower 2 Preset 2 Selection Preset 3 Buttons Description Off Close Engraving • Often used to select and adjust scenes. • Large, rounded buttons are easy to use. IR Window • Backlit buttons with optional engraving make it easy to find and operate the Wallstation in low light conditions. Master Raise / Lower • Optional button engraving is angled up to the eye for QSWE-8BRLIRN-AW-EGN easy reading. (Non-insert version) • The LEDs next to each button are used during programming and provide feedback when the buttons are pressed. • Master raise / lower brightens or dims all lighting or raises / lowers all assigned shades in the last selected Group 1 Open scene or toggled group. Preset 1 • Functions as two independently programmable Group 2 Preset 2 controllers when engraving or no engraving is ordered. Preset 3 Left column mimics a 3-button column and right Group 3 Close column mimics a 5-button column. Wallstation can control two lighting zones, two shade zones, or one of each. Or can function as one shade group control where the right keypad controls the group of shades indicated by the left keypad. QSWE-8BRLIRI-AW-E01 • Shade control features (E01 engraving): (Insert version) - U sed to control multiple groups of shades independently from a single-gang keypad (e.g., a window with a sheer shade and a blackout shade). - C an control Sivoia QS Window Treatments. - A lso controls shades with wireless IR controllers SVQ-3PIT, SVQ-OCIT, SVQ-4GD-OCIT, and SVQ-4S2G-IT. - P ressing the Open (or Close) button once will cause the window treatments to move to their fully open (or closed) position. Tap any button (regardless of function) to stop a shade that is in motion. - T hree (3) programmable preset buttons. • Receives up to two contact closure inputs via a connector on the back of the Wallstation. SPECIFICATION SUBMITTAL Page 9 Job Name: Model Numbers: Job Number:

Page 10

International Wallstations 369273e 10 02.22.24 Color and Engraving Codes LEDs QSWE-10BRLN-___-___ QSWE-10BRLI-___-___ 10-Button Wallstation with 1 6 Raise / Lower 2 7 Scene 3 8 Selection 4 9 Buttons Description 5 Off • Often used to select and adjust scenes. Engraving • Large, rounded buttons are easy to use. • Backlit buttons with optional engraving make it Master Raise / Lower easy to find and operate the Wallstation in low light conditions. QSWE-10BRLN-AW-EGN • Optional button engraving is angled up to the eye for (Non-insert version) easy reading. • The LEDs next to each button are used during programming and provide feedback when the buttons are pressed. 1 Open • Master raise / lower brightens or dims all lighting or 2 Preset 1 raises / lowers all assigned shades in the last selected 3 Preset 2 scene or toggled group. 4 Preset 3 • Functions as two independently programmable controllers when engraving or no engraving is Off Close ordered. Left column mimics a 5-button column and right column mimics a 5-button column. Wallstation can control two lighting zones, two shade zones, or one of each. QSWE-10BRLI-AW-E01 • Receives up to two contact closure inputs via a (Insert version) connector on the back of the Wallstation. • S hade control features (E01 engraving): - Can control Sivoia QS Window Treatments. - Pressing the Open (or Close) button once will cause the window treatments to move to their fully open (or closed) position. Tap any button (regardless of function) to stop a shade that is in motion. - Three (3) programmable preset buttons. SPECIFICATION SUBMITTAL Page 10 Job Name: Model Numbers: Job Number:

Page 11

International Wallstations 369273e 11 02.22.24 Specifications Dimensions Front View Power Input (Control Link Terminal 2) SELV / PELV. Operating voltage: 24–36 V 30 mA Key Design Features • Field-changeable button and faceplate assemblies allow easy customization. 86 mm • Meets IEC 801-2. Tested to withstand 15 kV electrostatic discharge (3.5 in) without damage or memory loss. • Faceplate snaps on with no visible means of attachment. • Available as an “insert” style control for multiganging. • Use Faceplate Replacement Kits to change color, button configuration, or engraving, or to convert between non-insert and insert configurations. • Faceplate Replacement Kits may also be used to convert between 86 mm non-insert and insert configurations. (3.5 in) System Communications and Capacity Side View • SELV / PELV wiring connects Wallstations to other devices on the QS Link. 28 mm (1.1 in) • A QS system can have up to 100 devices and 100 zones; seeTouch QS wallstations each count as 1 device and 0 zones on the QS Link. • A seeTouch QS wallstation consumes 1 power draw unit (PDU) on the QS link. For complete information, see “Power Draw Units on the QS Link,” Lutron PN 369405. 54 mm ( 2.1 in) Terminals 2 Accept up to two 1.0 mm (18 AWG). Environment 0 to 40 °C (32 to 104 °F). Relative humidity less than 90% non-condensing. Back View QS Link Connector Compatibility seeTouch QS keypads are compatible with GRAFIK Eye QS, Energi Savr Node, and Quantum. C 1 B Note: Energi Savr Node does not support shade type wallstations. 2 A 3 4 Mounting Typical backbox dimensions: 75 mm (3 in) wide, 75 mm (3 in) tall, 35 mm (1.4 in) deep. ! Sensor/ WARNING – Entrapment Hazard – May result in serious injury or death. Contact These controls should only be used to Closure control equipment which is visible from Input every control location. Connector ! WARNING – Fire hazard – May result in serious injury or death. Only use these controls to operate approved load and equipment types. IMPORTANT NOTE: Examples of such equipment which must not be operated by these controls include (but are not limited to) motorized gates, garage doors, industrial doors, microwave ovens, heating pads, fireplaces, space heaters, etc. It is the installer’s responsibility to ensure that the equipment being controlled is visible from every control location and that only suitable equipment is connected to these controls. Failure to do so could result in serious injury or death. SPECIFICATION SUBMITTAL Page 11 Job Name: Model Numbers: Job Number:

Page 12

International Wallstations 369273e 12 02.22.24 Available Control Types International seeTouch wallstations are available in three types: Lights Only Lights and Shades Shades Only 1 Open Open 1 3 2 Preset 1 Group 1 Preset 1 3 Preset 2 Preset 2 2 Off 4 Preset 3 Group 2 Preset 3 Off Close Close QSWE-4BI-AW-EGN QSWE-10BRLI-AW-E01 QSWE-7BRLI-AW-E01 shown shown shown Lights Only • Controls only lights. • Has a programmable column type (choose from the list on the following pages). • Engraving options: General (EGN) and Non-Standard (NST). Lights and Shades • Left column controls only lights and has a programmable column type (choose from the list on the following pages). • Right column controls only shades and has a programmable column type (choose from the list on the following pages). • Models with preset buttons have programmable preset levels. • Engraving options: General (EGN) and Non-Standard (NST); Standard (E01) available for model QSWE-10BRLI-WH-E01 only. Shades Only • Controls only shades. • Has a programmable column type (choose from the list on the following pages). • Models with preset buttons have programmable preset levels. • Engraving options: Standard (E01) and Non-Standard (NST). SPECIFICATION SUBMITTAL Page 12 Job Name: Model Numbers: Job Number:

Page 13

International Wallstations 369273e 13 02.22.24 Available Column Types Scene (with Off) • Controls preprogrammed scenes on one or more scene controllers (such as a GRAFIK Eye QS, or an area on an ESN). • Buttons within a column control the same scene controller(s) (different buttons within a column cannot control different scene controllers). • The scene recalled by the first button in a column is programmable, subsequent buttons recall the next numerical scene, and the last button always recalls Scene Off. • A 1-button scene Wallstation will always toggle between the assigned scene and Scene Off. Scene (without OFF) • Identical function to Scene with Off, except the last button in a column recalls the next consecutive scene, not Scene Off. Zone Toggle • Buttons toggle a zone or group of zones between programmable preset values and Off (where all zones are Off). • Each zone can be programmed to a different value. • Each button can be individually programmed to a different load or group of loads. Partition • Allows the user to assign individual buttons of a column to different scene controllers (areas). • One button press (button LED lights) indicates an open partition within the space so that devices programmed to that button talk to each other in both directions. • A second button press (button LED goes off) indicates a closed partition within the space so that devices programmed to that button function independently. 2B Partition (2-button Wallstation only) • Identical function to Partition, except that there are two buttons. • A top button press indicates an open partition; a bottom button press indicates a closed partition. 2B Fine Tune (2-button Wallstation only) • Buttons function as raise and lower buttons for assigned zones. • A button tap will raise/lower the level of assigned zones by 1 percent. • Press and holding the buttons smoothly raises to high end or smoothly lowers to low end. 2B Sequence (2-button Wallstation only) • All assigned scene controllers continuously cycle through either Scenes 1–4 or Scenes 5–16 using the programmed fade times for each scene. • Useful for spaces that desire dynamic lighting, such as decorative lighting or displays in retail stores. (continued) SPECIFICATION SUBMITTAL Page 13 Job Name: Model Numbers: Job Number:

Page 14

International Wallstations 369273e 14 02.22.24 Available Column Types (continued) 2B Panic (2-button Wallstation only) • Button press causes all assigned scene controllers to go to Scene 16. • Temporarily disables all button presses and ignores scene or zone level changes. 2B Timeclock (2-button Wallstation only) • Allows the user to enable or disable the timeclock on a GRAFIK Eye QS. • A top button press enables the timeclock; a bottom button press disables the timeclock. Shade • Wallstation must have more than 1 button. • Raise / Lower buttons are recommended for programming. • The top button becomes the Open button; the bottom button becomes the Close button for associated Sivoia QS shades or third-party AC shades. • For keypads with more than two buttons, the middle buttons are programmable Preset buttons. Shade Group • Available only on a multi-column keypad where another column is a shade column. • Allows the shade column to operate as multiple independent keypads (one per group). • The shade group column selects which independent keypad is currently active (indicated by the group button whose LED is lit). Notes • Except where noted, control types linked to a GRAFIK Eye QS can be changed using the GRAFIK Eye programming menu (e.g., control programmed as lights only can be changed to shades only). • Standard (NST) programming can be acquired through a GRAFIK Eye QS, Energi Savr Node, or Quantum system. Otherwise, please reference Application Note 048428, “Wired seeTouch QS: Advanced Programming Mode”. SPECIFICATION SUBMITTAL Page 14 Job Name: Model Numbers: Job Number:

Page 15

International Wallstations 369273e 15 02.22.24 How to Build a Standard International seeTouch QS Model Number QSWE - -AW Prefix Button Insert White Configuration Style Matte (see next page) Finish N: Non-insert I: Insert How to Build a Custom International seeTouch QS Model Number QSWE- - - Prefix Button Insert Color / Engraving Configuration Style Finish Code (see next page) N: Non-insert I: Insert Engraving Codes Omit: Unengraved Color / Finish Codes EGN: G eneral Engraving For “Lights only” and “Lights and Shades” controls Satin Colors Matte Finishes E01: Standard Engraving Available with Insert (I) For “Shades only” controls style controls only. E02: Secondary engraving for “Shades only” controls Argentum AR NST: N on-Standard Text Engraving Mica MC Please visit the GRAFIK Eye QS website at Arctic white AW www.lutron.com/grafikeyeqs for custom engraving forms Architectural Metal Finishes With black plastic buttons (standard). Bright Brass BB Bright Chrome BC Engraving Notes Bright Nickel BN • The engraving option (model number and suffix) Satin Brass SB is related to the control type, as shown above in Satin Chrome SC the ‘How to Build a Standard International Satin Nickel SN seeTouch QS Model Number’ section. • Three engraving options are available: Special Metal Finishes 1. EGN: G eneral engraving for ‘Lights Only’ and Antique Brass QB ‘Lights and Shades’ controls Antique Bronze QZ 2. E01: Standard engraving for ‘Shades Only’ Gold Plated AU controls and ‘Lights and Shades’ for model QSWE-10BRLI-WH-E01 only * Note: Some Satin Colors units ship with 3. NST: Non-standard engraving for ‘Lights Only’, different color buttons. For more ‘Lights and Shades’, or ‘Shades Only’ information, please visit the seeTouch controls website at • If no engraving is specified, wallstations will ship www.lutron.com/seetouch. with an engraving certificate, with EGN being its default engraving type. If no color is specified, wallstations will ship with Arctic white (AW) finish. SPECIFICATION SUBMITTAL Page 15 Job Name: Model Numbers: Job Number:

Page 16

International Wallstations 369273e 16 02.22.24 How to Build an International seeTouch QS Model Number (continued) Button Configurations 2B 3B 4B 5BRL 2-button 3-button 4-button 5-button with raise / lower 5BRLIR 6BRL 7BRL 8BRL 5-button with IR receiver 6-button with raise / lower 7-button with raise / lower 8-button with raise / lower and raise / lower 8BRLIR 10BRL 8-button with IR receiver 10-button with and raise / lower raise / lower SPECIFICATION SUBMITTAL Page 16 Job Name: Model Numbers: Job Number:

Page 17

International Wallstations 369273e 17 02.22.24 Faceplate Information Faceplate Replacement Kits Use Faceplate Replacement Kits to change: colors, button configuration, engraving, between insert and non-insert versions. Each Kit includes an adapter, button assembly, and wallplate. Non-Insert Kit Non-insert style controls: Faceplate complements a specified button kit. When the faceplate is removed or replaced, the buttons are removed and replaced along with it. Insert Kit Insert style controls: Faceplate is a decorator style with a universal size opening that fits all button kits. This style allows for easy replacements of button kits without changing the faceplate. Model Numbers for Kits Non-Insert Insert QSWER-2BN QSWER-2BI QSWER-3BN QSWER-3BI QSWER-4BN QSWER-4BI QSWER-5BRLN QSWER-5BRLI QSWER-5BRLIRN QSWER-5BRLIRI QSWER-6BRLN QSWER-6BRLI QSWER-7BRLN QSWER-7BRLI QSWER-8BRLN QSWER-8BRLI QSWER-8BRLIRN QSWER-8BRLIRI QSWER-10BRLN QSWER-10BRLI SPECIFICATION SUBMITTAL Page 17 Job Name: Model Numbers: Job Number:

Page 18

International Wallstations 369273e 18 02.22.24

International seeTouch QS Wallstation Button Functions Summary Button Configuration 2B 3B 4B 5BRL 6BRL 7BRL 8BRL 10BRL 5BRLIR 8BRLIR EGN (General Engraving) Functionality Scene 1, Off Scene 1, Off Scenes 1-3, Scenes 1-4, Left: Left: Left: NA Off Off Scenes 1-2, Scene 1, Off Scenes 1-2, Off Off Right: Open, Right: Right: Open, Preset, Scenes 1-4, Presets 1-3, Close Off Close E01 (Standard Engraving) Functionality NA NA NA Open, Left: Left: Left: Left: Presets 1-3, Groups 1-3 Groups 1-2 Groups 1-3 Scenes 1-4, Close Right: Right: Right: Off Open, Open, Open, Right: Preset, Presets 1-3, Presets 1-3, Open, Close Close Close Presets 1-3, Close Legend: Light Control Shade Control SPECIFICATION SUBMITTAL Page 18 Job Name: Model Numbers: Job Number:

Page 19

International Wallstations 369273e 19 02.22.24 Link Wiring (<153 m/500 ft) Wallstation Installation SELV / PELV control wiring QS Link Wiring (2) 1.0 mm2 (18 AWG) 1: Common • Use SELV / PELV wiring to connect Wallstations to 2: V+ the QS link. 2 (22 AWG) s hielded, twisted • Connect two 0.5 mm pair wires to terminals 3 and 4 of the wallstation’s control link connector. Shielding (drain) of the C 1 B twisted pair wires must be connected together as 2 A 3 shown, but do not connect the shielding to earth / 4 ground or the wallstation and do not allow it to contact the grounded wallbox. • Connect the appropriate size wires to terminals 1 and 2 for power, according to your link length (see Drain table below). • Connect Drain / Shield as shown. Do not connect to Back View Ground (Earth) or Wallstation. Connect the bare Data link: drain wires and cut off the outside shield. (1) twisted, shielded pair 0.5 mm2 (22 AWG) Note: Use appropriate wire connecting devices as 3: MUX specified by local codes. 4: MUX Link Wiring (153 m/500 ft to 610 m/2 000 ft) Data Link: (1) twisted, shielded pair 0.5 mm2 (22 AWG) 3: MUX 4: MUX 4 3 2 1 2 (2) 4.0 mm (12 AWG) SELV / PELV Control wiring 2 (2) 1.0 mm (18 AWG) 2 1: Common (2) 4.0 mm 2: V+ (12 AWG) QS Link Wire Sizes (check compatibility in your area) QS Link Wiring Length Wire Gauge Lutron Cable Part Number Power (terminals 1 and 2) 2 Less than 153 m (500 ft) 1 pair 1.0 mm (18 AWG) GRX-CBL-346S (non-plenum) Data (terminals 3 and 4) GRX-PCBL-346S (plenum) 1 twisted, shielded pair 0.5 mm2 (22 AWG) Power (terminals 1 and 2) 153 to 610 m 2 (500 to 2 000 ft) 1 pair 4.0 mm (12 AWG) GRX-CBL-46L (non-plenum) Data (terminals 3 and 4) GRX-PCBL-46L (plenum) 1 twisted, shielded pair 0.5 mm2 (22 AWG) SPECIFICATION SUBMITTAL Page 19 Job Name: Model Numbers: Job Number:

Page 20

International Wallstations 369273e 20 02.22.24 Contact Closure Inputs Specifications Contact Closure Input Wiring • Inputs must be dry contact closure, solid-state, • Use SELV / PELV wiring to connect the contact open collector, or active-low (NPN) / active-high closure inputs to the Wallstation. (PNP) output. (3) 1.0 mm2 - Open collector NPN or active-low on-state voltage (18 AWG) must be less than 2 V and sink 3,0 mA - Open collector PNP or active-high on-state voltage must be greater than 12 V and source C 1 B C: Common 3,0 mA 2 A 3 • Wallstation is miswire protected up to 36 V . 4 B: Input 2 • Outputs must stay in the closed or open states for at least 40 msec in order to be recognized by the A: Input 1 Wallstation. Back View The Lutron logo, Lutron, Energi Savr Node, GRAFIK Eye, Quantum, Satin Colors, seeTouch, and Sivoia are trademarks or registered trademarks of Lutron Electronics Co., Inc. in the US and/or other countries. SPECIFICATION SUBMITTAL Page 20 Job Name: Model Numbers: Job Number: