This document could not be shown here. Open the PDF.
Text of this document8 pages · 1,494 words
Page 1
product specifications 369607e 09.14.15 Wired International seeTouch® Keypads HomeWorks® QS international seeTouch® keypads provide homeowners with a simple and elegant way to operate lights, shades / draperies, motorized screens, thermostats, and many other devices. All HomeWorks® QS wired international seeTouch® keypads have two contact closure inputs on the back of the unit which provide independent functions from the front buttons. Some models are available with an infrared HomeWorks® QS wired international seeTouch® (IR) receiver. keypads are available in many button ® QS international seeTouch® configurations, shown on the following two HomeWorks keypads feature large, easy-to-use buttons, plus pages. They are also available in insert (above a unique backlit engraving option that makes left) and non-insert (above right) styles. The insert the keypads readable any time of the day or style keypad allows for easy ganging. Keypad night. seeTouch® buttons are rounded, allowing and Button/Wallplate kits sold separately. engraving to be displayed at an upward angle, increasing readability. Replacement Kits are available in a variety of colors and with custom engraving to clearly identify each button’s function. ® wallplates snap on with no visible means Lutron of attachment. Multi-gang wallplates sold separately. www.lutron.com 1 Technical Support: 800.523.9466 (USA) +44.(0)20.7702.0657 (Europe)
Page 2
product specifications 369607e 09.14.15 Wired International seeTouch® Keypads Insert Style Model Numbers Base Units HQWIS-NB-NONE Keypad without Wallplate /Button Kit HQWIS-NBIR-NONE IR Keypad without Wallplate/Button Kit HWIS-2B-I-XX* HWIS-3B-I-XX* HWIS-4B-I-XX* Button/Wallplate Kits HWIS-2B-I-XX* 2 button HWIS-3B-I-XX* 3 button HWIS-4B-I-XX* 4 button HWIS-5BRL-I-XX* 5 button with Raise/Lower HWIS-5BRL-I-XX* HWIS-5BIR-I-XX* HWIS-6BRL-I-XX* HWIS-5BIR-I-XX* 5 button with Raise/Lower and IR HWIS-6BRL-I-XX* 6 button with Raise/Lower HWIS-7BRL-I-XX* 7 button with Raise/Lower HWIS-8BRL-I-XX* 8 button with Raise/Lower HWIS-8BIR-I-XX* 8 button with HWIS-7BRL-I-XX* HWIS-8BRL-I-XX* HWIS-8BIR-I-XX* Raise/Lower and IR HWIS-10BRL-I-XX* 10 button with Raise/Lower Replacement Button Kits SIB-2B-XX*-E 2 button SIB-3B-XX*-E 3 button HWIS-10BRL-I-XX* SIB-4B-XX*-E 4 button Ordering Example: SIB-5BRL-XX*-E 5 button with Raise/Lower HQWIS-NB-NONE (Base Unit) and SIB-5BIR-XX*-E 5 button with HWIS-2B-I-AW (Wallplate/Button Kit) Raise/Lower and IR SIB-6BRL-XX*-E 6 button with Raise/Lower SIB-7BRL-XX*-E 7 button with Raise/Lower SIB-8BRL-XX*-E 8 button with Raise/Lower SIB-8BIR-XX*-E 8 button with Raise/Lower and IR SIB-10BRL-XX*-E 10 button with Raise/Lower * ”XX” in the model number represents color / finish code. See Colors and Finishes at end of document. www.lutron.com 2 Technical Support: 800.523.9466 (USA) +44.(0)20.7702.0657 (Europe)
Page 3
product specifications 369607e 09.14.15 Wired International seeTouch® Keypads Non-Insert Style Model Numbers Base Units HQWIS-NB-NONE International seeTouch® without Wallplate or Button Kit HQWIS-NBIR-NONE International seeTouch® with IR without Wallplate or Button Kit HWIS-2B-F-XX* HWIS-3B-F-XX* HWIS-4B-F-XX* Button/Faceplate Kits HWIS-2B-F-XX* 2 button non-insert HWIS-3B-F-XX* 3 button non-insert HWIS-4B-F-XX* 4 button non-insert HWIS-5BRL-F-XX* 5 button non-insert with raise/lower HWIS-5BRL-F-XX* HWIS-5BIR-F-XX* HWIS-6BRL-F-XX* HWIS-5BIR-F-XX* 5 button non-insert with raise/lower and IR HWIS-6BRL-F-XX* 6 button non-insert with raise/lower HWIS-7BRL-F-XX* 7 button non-insert with raise/lower HWIS-8BRL-F-XX* 8 button non-insert with raise/lower HWIS-8BIR-F-XX* 8 button non-insert with HWIS-7BRL-F-XX* HWIS-8BRL-F-XX* HWIS-8BIR-F-XX* raise/lower and IR HWIS-10BRL-F-XX* 10 button non-insert with raise/lower Replacement Button Kits SIB-2B-XX*-E 2 button replacement kit SIB-3B-XX*-E 3 button replacement kit HWIS-10BRL-F-XX* SIB-4B-XX*-E 4 button replacement kit SIB-5BRL-XX*-E 5 button replacement kit Ordering Example: with raise/lower HQWIS-NB-NONE (for base unit) plus SIB-5BIR-XX*-E 5 button replacement kit HWIS-2B-F-AW (for button/faceplate kit) with raise/lower and IR SIB-6BRL-XX*-E 6 button replacement kit with raise/lower SIB-7BRL-XX*-E 7 button replacement kit with raise/lower SIB-8BRL-XX*-E 8 button replacement kit with raise/lower SIB-8BIR-XX*-E 8 button replacement kit with raise/lower and IR SIB-10BRL-XX*-E 10 button replacement kit with raise/lower * ”XX” in the model number represents color / finish code. See Colors and Finishes at end of document. www.lutron.com 3 Technical Support: 800.523.9466 (USA) +44.(0)20.7702.0657 (Europe)
Page 4
product specifications 369607e 09.14.15 Wired International seeTouch® Keypads Specifications Model Numbers See pages 2 and 3 for complete lists of model numbers. Power 24–36 V- 30 mA Typical Power 0.6 W; 1 Power Draw Unit (PDU) Consumption Test conditions: all backlights on medium intensity, two LEDs on (two presets active), keypad powered at 24 V- Regulatory CE, S C-tick, UL, cUL Approvals Environment Ambient operating temperature: 0 °C to 40 °C (32 °F to 104 °F), 0% to 90% humidity, non-condensing. Indoor use only. Communications Connects to QS wired device link on Homeworks® QS processor. ESD Protection Tested to withstand 15 kV electrostatic discharge without damage or memory loss, in accordance with IEC 801-2. Power Failure Power failure memory: should power be interrupted, the keypad will return to its previous state when power is restored. Mounting EBB-15 RD (Round wallbox) 71 mm diameter x 61 mm deep or EBB-15 SQ (Square wallbox) 71 mm wide x 71 mm high x 47 mm deep. 2 Wiring Control wire must be 1 pair 1.0 mm (18 AWG) SELV / PELV / NEC® Class 2 2 2 for power and 1 pair 0.5 mm to 1.0 mm (22 AWG to 18 AWG) SELV / PELV / NEC® Class 2 twisted/shielded for data (see Wiring). Warranty www.lutron.com/TechnicalDocumentLibrary/Intl_Warranty.pdf Design Features • Green status LEDs. • Available as an insert style control for • Backlit button/engraving. muti-ganging. • • Field-changeable Button/Wallplate Kits Lutron® wallplates snap on with no visible allow for easy customization. means of attachment. • • All terminal block inputs are over-voltage Use Replacement Kits to change color, and miswire-protected against wire reversals button configuration, engraving, or to and shorts. convert between insert and non-insert style configurations. www.lutron.com 4 Technical Support: 800.523.9466 (USA) +44.(0)20.7702.0657 (Europe)
Page 5
product specifications 369607e 09.14.15 Wired International seeTouch® Keypads Dimensions All dimensions are shown as mm Front View Side View Back View QS Link Connector 1 2 3 86 4 Sensor/ Contact Closure Input Connector 86 6 35 Mounting and Parts Identification Adapter Keypad Mounting Mounting Screws Screws Wallplate Wallbox Keypad Wallplate Adapter Replacement Kit Non-insert version shown www.lutron.com 5 Technical Support: 800.523.9466 (USA) +44.(0)20.7702.0657 (Europe)
Page 6
product specifications 369607e 09.14.15 Wired International seeTouch® Keypads Operation Status LEDs Show which keypad button has been activated. Keypad Buttons Press to activate desired levels or positions. IR Receiver Use a compatible IR remote to activate button functions. Raise / Lower Buttons Lights increase or decrease in intensity and Non-insert version shown shades /draperies move towards the open or close limit. www.lutron.com 6 Technical Support: 800.523.9466 (USA) +44.(0)20.7702.0657 (Europe)
Page 7
product specifications 369607e 09.14.15 Wired International seeTouch® Keypads Wiring Control Link Wiring to Control Link • Keypad wiring may be in a daisy- 2 SELV / PELV / NEC® Class 2 control wiring: 1.0 mm chain, star or T-tap configuration. (18 AWG) 2 • The total length of wire on a QS Data link: twisted, shielded pair 0.5 to 1.0 mm wired link is not to exceed (22 AWG to 18 AWG) 2 2 610 m. Control wiring 1.0 mm (18 AWG) 1.0 mm 1: Common 2: V+ (18 AWG) • Up to 100 devices can be connected to the QS wired 1.0 mm2 link. This can include wired (18 AWG) ® 1 international seeTouch 2 Common 3 keypads along with other 2 4 1.0 mm devices as defined in the (18 AWG) Input 2 ® QS software. HomeWorks • An external power supply may Input 1 be required depending on the total current draw of all wired devices on the processor link. Data Link - twisted, shielded pair Note: Use appropriate wire connecting 2 2 • Make connections inside the 0.5 mm to 1.0 mm devices as specified by local codes. wallbox or in a switch/junction (22 AWG to 18 AWG) 3: MUX box with a maximum wire length 4: MUX of 2.5 m from the link to Contact Closure Input the Keypad. • Inputs must be dry contact closure, solid-state, • Two 1.0 mm2 (18 AWG) conductors open collector, or active-low (NPN)/active-high for common (terminal 1) and V+ (PNP) output. (terminal 2). These will not fit in – Open collector NPN or active-low on-state terminals. Connect as shown. voltage must be less than 2 V- and sink 3.0 mA 2 • One shielded, twisted pair 0.5 mm to – Open collector PNP or active-high on-state 2 1.0 mm (22 AWG to 18 AWG) for voltage must be greater than 12 V- and data link (terminals 3 and 4). source 3.0 mA • Connect Drain/Shield as shown. • Keypad is miswire protected up to 36 V-. Do not connect to Ground (Earth) or • Outputs must stay in the closed or open states Wallstation. Connect the bare drain for at least 40 msec in order to be recognized by wires and cut off the outside shield. the Keypad. www.lutron.com 7 Technical Support: 800.523.9466 (USA) +44.(0)20.7702.0657 (Europe)
Page 8
product specifications 369607e 09.14.15 Wired International seeTouch® Keypads Colors and Finishes Architectural Metal Finishes (wallplates only) Architectural Matte Finishes Satin Brass Bright Brass Bright Chrome Arctic White Argentum SB BB BC AW AR Antique Brass Antique Bronze Satin Chrome Mica QB QZ SC MC Satin Nickel Bright Nickel Gold SN BN AU • Due to printing limitations, colors and finishes shown cannot be guaranteed to perfectly match actual product colors. • Color chip portfolios and keychains are available for more precise color matching. Architectural Metal portfolio AMTL-CK-1 Architectural Matte keychain AM-CK-1 www.lutron.com 8 Technical Support: 800.523.9466 (USA) +44.(0)20.7702.0657 (Europe)
Need assistance or looking to source this item?