This document could not be shown here. Open the PDF.
Text of this document3 pages · 864 words
Page 1
DESIGN HIGHLIGHTS ISSUE 002 •Automatic variable fan SHEET 1 of 3 Technical Sheet SAC-U2 - Smart Airflow Control - Unit 2 speeds for different temperatures •Compact design and easy The Smart Airflow Control range is designed to regulate airflow around equipment in installation AV racks or in confined spaces. The SAC-U1 attaches to an external section of the cabinet to aid in the natural •Onboard electronics convection inside the space. Units can be combined to create an input and output to FUNCTION further increase airflow. An electric wall bracket that •Ideal for cooling AV can move an LCD or Plasma components such as screen out from the wall amplifies, receivers etc DESIGN HIGHLIGHTS to an angle of 90 one way. •Neat compact design Cables for the screen can • Temperature controlled be routed through the variable fan state & speed •Simple to install bracket for a very neat look. with equipment overheat alarm •Extra quiet fans fully isolated SUITABILITY • Near silent operation with The PSE90 wall bracket vibration isolating rubber is suitable for screens mounts OPTIONS from 37" up to 65". • Separate control board for The smaller FSE90 flexible installation bracket is suitable for •Any RAL colour available 15" to 32" screens. • External trim panel to finish •Custom sizes available the exterior of the cabinet SPECIFYING Check wall makeup to decide on fixings to be used. Check screen details for mounting possibilities. Check angles for viewing. OPTIONS CONTROL • Custom sizes available Supplied with basic infrared remote. Can be learnt by • Any RAL colour available many learning remotes. Also has switch control and RS232 so can be operated by relays, switches, Crestron / AMX or Lutron systems. WARNING It is the responsibility of the installer to warn all potential end users of the dangers of interfering with mechanisms during operation www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565 IMPORTANT Mechanisms which lift or move weights need to be checked on a yearly basis for any damage which may result in an accident
Page 2
7.1 180 9.6 245 0 0.8 20 9.9 4.7 252.2 119.5 8.6 218.9 9.4 238.9 0.2 4.5 1.6 40.9 IEC power input Thermometer jack input 10.2 260 ISSUE 002 SHEET 2 of 3 Technical Sheet SAC-U2 - Smart Airflow Control - Unit 2 General Dimensions Control Box 2.0 Temperature Mensor Mount Bracket 50 Sophisticated electronics 1.6 1.6 allow for a favourite viewing 40 40 1.2 position to be programmed 30 via the IR remote control. Mechanism allows up to 750mm extension of screen centre from wall. 7.5 190 All the power and signal 5.9 cables for screen and 150 mechanism can be 1.2 0.2 concealed within 30 4.5 the bracket. Mechanism can be reversed from a left to a right - handed or from a right to a left - handed 2.0 bracket simply and quickly during 3.7 52 the installation process. 94 Super quiet and smooth action from parallel to wall out to 90 maximum 1.2 0.0 movement. 0.0 30.6 0.9 0.9 Fan Panel Internal Trim Panel External Trim Panel Available with Marine Lock to safely lock bracket against wall when not in viewing position. 10.2 260 Standard mechanism with 10.2 0.2 10.2 0.2 VESA 400 mounting is 4.5 260 260 4.5 only 90mm deep. Group A or UNI-60 mount adds 20mm to make the total depth of bracket only 110mm. 3.7 5.3 4.8 5.3 4.8 5.3 95 135 123 135 123 135 0.2 9.8 9.8 9.8 4.5 248 248 248 www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565
Page 3
ISSUE 002 SHEET 3 of 3 Technical Sheet SAC-U2 - Smart Airflow Control - Unit 2 Design Highlights External trim panel Sophisticated electronics allow for a favourite viewing Temperature Fake section of position to be programmed sensor jack AV cabinet via the IR remote control. Fan panel input Mechanism allows up to 750mm extension of screen centre from wall. Temperature sensor & mount bracket on flying lead to be fixed All the power and signal inside the AV cabinet cables for screen and IEC power input mechanism can be on rear face concealed within the bracket. Mechanism can be reversed Control board from a left to a right - handed on flying lead or from a right to a left - handed bracket simply and quickly during Fans mounted on rubber the installation process. fixings to run quieter and vibration free Super quiet and smooth action from parallel to wall out to 90 maximum [9.0] movement. 230 G Available with Marine Lock [4.5] Mounting Mounting to safely lock bracket against 115 option A option B wall when not in viewing position. Standard mechanism with VESA 400 mounting is only 90mm deep. The FCS stacked option allows 2 different ways Group A or UNI-60 mount adds of mounting to suit your 20mm to make the total depth cabinet of bracket only 110mm. Internal Trim Panel Fan Trim Panel CABLE MANAGEMENT SLOT Hole cut out size in the cabinet should be 230mm [9.0"] X 115 [4.5"] Internal trim panel Extenal Trim Panel Fan Panel G www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565 F F
Need assistance or looking to source this item?