This document could not be shown here. Open the PDF.
Text of this document3 pages · 608 words
Page 1
ISSUE 001 SHEET 1 of 3 Technical Sheet SAC-U1 - Smart Airflow Control - Unit 1 The Smart Airflow Control range is designed to regulate airflow around equipment in AV racks or in confined spaces. The SAC-U1 attaches to an external section of the cabinet to aid in the natural convection inside the space. Units can be combined to create an input and output to further increase airflow. DESIGN HIGHLIGHTS • Temperature controlled variable fan state & speed with equipment overheat alarm • Near silent operation with vibration isolating rubber mounts Self contained unit with onboard electronics for simple installation • External trim panel to finish the exterior of the cabinet • OPTIONS Custom sizes available • • Any RAL colour available WARNING It is the responsibility of the installer to warn all potential end users of the dangers of interfering with mechanisms during operation www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565
Page 2
ISSUE 001 SHEET 2 of 3 Technical Sheet SAC-U1 - Smart Airflow Control - Unit 1 Temperature Sensor General Dimensions Mount Bracket 1.6 1.6 40 1.2 Sophisticated electronics 40 30 allow for a favourite viewing position to be programmed via the IR remote control. 7.1 Mechanism allows up to 180 750mm extension of screen centre from wall. All the power and signal 9.6 1.2 0.2 cables for screen and 245 30 4.5 mechanism can be 5.1 concealed within 130 the bracket. 0 Mechanism can be reversed from a left to a right - handed 0.8 or from a right to a left - handed bracket simply and quickly during 20 the installation process. Super quiet and smooth action from parallel to wall out to 90 maximum movement. 9.9 4.7 252.2 119.5 Available with Marine Lock to safely lock bracket against wall when not in viewing position. 8.6 Standard mechanism with 218.9 VESA 400 mounting is 9.4 only 90mm deep. 238.9 0.2 Group A or UNI-60 mount adds 20mm to make the total depth 4.5 19" RACK WING MOUNTS 1.6 of bracket only 110mm. 10.2 External Trim Panel 0.2 40.9 260 4.5 IEC power input Temperature sensor jack input 4.8 5.3 123 135 10.2 260 9.8 248 www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565 ON BOARD ELECTRONICS
Page 3
IEC Power Input Fans mounted on rubber fixings to run quieter and vibration free ISSUE 001 SHEET 3 of 3 Technical Sheet SAC-U1 - Smart Airflow Control - Unit 1 Design Highlights C Sophisticated electronics External allow for a favourite viewing trim panel position to be programmed via the IR remote control. Mechanism allows up to 750mm extension of screen centre from wall. Hole cut out size in the cabinet should be 230mm [9.0"] X 115 [4.5"] All the power and signal cables for screen and mechanism can be 0.4 concealed within 10 the bracket. Key hole centre mount slot of easy installation Mechanism can be reversed from a left to a right - handed or from a right to a left - handed bracket simply and quickly during [9.0] the installation process. 230 Super quiet and smooth action from parallel to wall out to 90 maximum [4.5] movement. Fan finger 115 Temperature sensor & guard Available with Marine Lock mount bracket on to safely lock bracket against flying lead to be fixed wall when not in viewing position. inside the AV cabinet Standard mechanism with VESA 400 mounting is only 90mm deep. Group A or UNI-60 mount adds 20mm to make the total depth of bracket only 110mm. Fake section of cabinet Onboard electronics www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565
Need assistance or looking to source this item?