Future Automation PS80-SAM114 technical sheet

Page 1

PS80 SAM 114" CUSTOM PULL & SWIVEL TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

PS80 SAM 114" CUSTOM PULL & SWIVEL SPECIFICATION MEASUREMENTS Maximum Weight Capacity 120Kg (265lb) Maximum Extension From Wall 569mm (22 3/8") Depth From Wall 84mm (3 5/16") Packaging Dimensions 1270 x 380 x 200mm (50" x 14 15/16" x 7 7/8") Shipping Weight 20Kg (44lb) Movement Type Manual Product Options / Features Specific B&O and Loewe mounts / adapters, Custom RAL paint finishes, WB80 Package Contents Mechanism Marine Suitable No TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

PS80 SAM 114" CUSTOM PULL & SWIVEL GENERAL DIMENSIONS 47 1/4"

1200 22 3/8"

569 39 3/8"

1000

50 5/16" 100

1 15/16" 8.5 3 15/16"

995 960 37 3/4" 39 3/16"

84 3 5/16"

TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

PS80 SAM 114" CUSTOM PULL & SWIVEL 8 11/16" WALL PLATE DIMENSIONS

220

7 1/16"

180 30 38 88 5 1/8" 157 257 1 3/16" 1 1/2"

3 7/16"6 3/16"10 1/8"

130

3/8" TYP 10

714 28 1/8"

130 15 9/16"

11" TECHNICAL SHEET

279 UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

PS80 SAM 114" CUSTOM PULL & SWIVEL RECESS MOUNTING When recess mounting a screen on the PS80 the gap around the edge can be as little as 5mm [3/16"]. Ventilation would have to be provided by opening the top and maybe the bottom of the recess. A larger gap of 50mm [1 15/16"] around the screen would enable extra ventilation and enough space for finger access to manoeuvre the screen if required. 1 15/16" 50 To allow for ventallation and room to get a hand on top of screen to pull out 3/16"

5 Possible with additional cabinet ventilation TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 5 FUTUREAUTOMATION

Page 6

PS80 SAM 114" CUSTOM PULL & SWIVEL MOUNTING DETAILS DETAIL B The whole area of the wall plate needs to be well supported. Ideally DETAIL A solid plaster over brickwork. Pushing forces Pulling forces of of twice the twice the screens If mounting to a stud work wall its important to have 2 vertical studs screens weight weight can be behind on both sides of the wall plate. See details A & B. can push here. exerted here. A RECESS DEPTH = 3 3/4"

95 + Screen Depth B Ideal location for power and signal cables to enter recess TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

PS80 SAM 114" CUSTOM PULL & SWIVEL MOUNTING DETAILS The screen can be levelled by adjusting the grub screws. C DETAIL C Once the screen is level tighten the pinch bolt. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 001 WWW NET . . SHEET 7 FUTUREAUTOMATION