Future Automation PLH technical sheet

Page 1

PLH PLASMA LIFT HINGE FUNCTION The electric flap drops down into the cabinet before the screen is raised. DESIGN HIGHLIGHTS The base panel fills the opening when the screen is in the up position. •Drop & Roll concealed flap mechanism creates a tidy An optional swivel mount is available, appearance allowing the screen to be watched from multiple viewing angles. •The rack and pinion system creates a robust and durable lifting mechanism SUITABILITY The PLH range of lifts is suitable •Full cable management for screen sizes from 32" to 60". •Mechanism can be sized to Standard sizes based on suit specific screens 25Kg [55lb] maximum screen weight. •Onboard electronics Heavy Duty PLH mechanism is •Wide range of mounting available for larger, heavier screens. options A range of height, width and depth configurations are available to accommodate a broad range of OPTIONS audio / visual products. •Bang & Olufsen / Loewe mount options SPECIFYING Specify the Television. Specify the direction of rotation required. Establish cabinet dimensions. Construction of the cabinet can take place whilst the mechanism is being manufactured by Future Automation. CONTROL Supplied with basic infrared remote. Can be learnt by many learning remotes. Also has switch control and RS232 so can be operated by WARNINGIMPORTANT relays, switches, Crestron / AMX or Lutron systems. It is the responsibility of Mechanisms which lift the installer to warn all or move weights need potential end users of to be checked on a the dangers of interfering yearly basis for any with mechanisms during damage which may operation result in an accident TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 0015 WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

PLH PLASMA LIFT HINGE SPECIFICATION MEASUREMENTS Maximum Screen Depth 70mm (2 3/4") Maximum Weight Capacity 25Kg (55lb) - left and right hinge options available (see table on sheet 5 for further details) Maximum Rotation 90 Movement Type Motorised Power Supply Required 240V or 110V Power Consumption Max. 500W Power Consumption Standby 3W Mounting Patterns Supported VESA 400, 300, 200 W x 400, 300, 200 H Control Options IR Remote, RS232, Contact Closure Product Options / Features Specific B&O and Loewe mounts / adapters, Custom RAL paint finishes, Marine suitable version available Package Contents Mechanism, IR remote control Marine Suitable No TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 0015 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

PLH Design Highlights PLASMA LIFT HINGE The PLH is an extremely robust screen lifting solution, making it ideal for applications where GENERAL INFORMATION extra strength is required. The mechanism is available in The electric flap lowers into the cabinet by many different size options to approximately 40mm [1.5"] before rolling back accomodate a variety of in the cabinet. The screen is then raised cabinet dimensions. through the aperture in the cabinet top. This method of flap movement gives the neatest possible appearance as there is no flap panel visible when the screen is in the viewing position. The electric flap lowers and rolls back into the cabinet before the TV is raised Once fully elevated, the base panel fills the through the aperture. aperture in the cabinet top. VESA 200, 300 & 400 Many size options are available allowing mounting patterns the most efficient cabinet dimensions Mounting holes to secure the available. to be used for the chosen screen. mechanism to the cabinet. Full cable management keeps all screen power and signal cables safe and secure during mechanism operation. Many mounting options are available for Once the TV is in the viewing Loewe and Bang & Olufsen screens. position, the base panel fills the aperature in the cabinet top. An advanced control system allows the lift mechanism to be easily controlled via home automation systems such as Crestron and AMX. Two way communication is also possible via RS232. Mechanism can be factory configured as left hand (LH) or right hand (RH) hinge point mechanism. This allows the PLH mechanism to be used in almost any corner installation. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 0015 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

PLH PLASMA LIFT HINGE PLH-RH HINGE MECHANISM The PLH mechanism allows a screen to be rotated up to 90 about its end. Left Handed and Right Handed versions are available. Up to four user defined angular positions can be stored in the mechanism memory via the IR remote control. PLH-LH BASE PANEL DETAILS The base panel requires a circular cut out for the hinging mount to fix through. A removable insert is required to allow the base panel to pass over the screen mount pole. REMOVABLE INSERT TO REQUIRED FOR LEFT HAND (LH) ALLOW BASE TO PASS REQUIRED FOR RIGHT HAND (RH) MECHANISM CONFIGURATIONS OVER SCREEN MOUNT. MECHANISM CONFIGURATIONS

4 3/8"112 4 3/8"111 7 7/8" 2 3/8" VIEWING SIDE 2 3/8" 7 7/8" 200 60 60 200 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 0015 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

PLH PLASMA LIFT HINGE CABINET DIMENSIONS Maximum flap panel weight - 4kg [9lb] Maximum screen thickness - 70mm [2 3/4"] Maximum screen weight - 25kg [55lb] Maximum base panel weight - 6kg [13lb] MAXIMUM SCREEN HEIGHT INTERNAL HEIGHT mm [inches] mm [inches] 1/4" 485 [19 1/8] H 760 [29 15/16] 6 Base / Flap Panel Width 535 [21 1/16] H 810 [31 7/8] 585 [23 1/16] H 860 [33 7/8] 7 7/8" 635 [25] H 910 [35 13/16] [0.6 to 0.9] 200 685 [26 15/16] H 960 [37 13/16] 17 to 23 735 [28 15/16] H 1010 [38 3/4] 785 [30 7/8] H 1060 [41 3/4] 7 7/8" 835 [32 7/8] H 1110 [43 11/16] 200 885 [34 13/16] H 1160 [45 11/16] 935 [36 13/16] H 1210 [47 5/8] 8 1/8" 206 2 13/16" 985 [38 3/4] H 1260 [49 5/8] 72 MAXIMUM SCREEN WIDTH - MAXIMUM SCREEN WIDTH - BASE / FLAP PANEL WIDTH INTERNAL WIDTH ROTATION <70 ROTATION <90 [0.6 to 0.8] 1"25 mm [inches] mm [inches] mm [inches] mm [inches] 17 to 20 2 13/16" 72 750 [29 1/2] 700 [27 9/16] 770 [30 5/16] W 920 [36 1/4] 35 13/16" Internal 910 850 [33 7/16] 800 [31 1/2] 870 [34 1/4] W 1020 [40 3/16] Height 950 [37 3/8] 900 [35 7/16] 970 [38 3/16] W 1120 [44 1/8] Internal Width 1050 [41 5/16] 1000 [39 3/8] 1070 [42 1/8] W 1220 [48 1/16] 1150 [45 1/4] 1100 [43 5/16] 1170 [46 1/16] W 1320 [51 15/16] 1250 [49 3/16] 1200 [47 1/4] 1270 [50] W 1420 [55 7/8] 1350 [53 1/8] 1300 [51 3/16] 1370 [53 15/16] W 1520 [59 13/16] 1450 [57 1/16] 1400 [55 1/8] 1470 [57 7/8] W 1620 [63 3/4] 1550 [61"] 1500 [59 1/16"] 1570 [61 13/16"] W 1720 [67 11/16"] 12 5/8" UK +44 (0) 1438 833577 US +1 (603) 742 9181 320 TECHNICAL SHEET ISSUE 0015 WWW NET . . SHEET 5 FUTUREAUTOMATION

Page 6

PLH PLASMA LIFT HINGE CONTROL BOX DETAILS RS232 PORT CONTACT CLOSURE IR OUTPUT 8 3/16"208 PORT INDICATOR LED EMERGENCY STOP CONNECTOR IR LEAD INPUT 3.5mm [0.14"] JACK 1/4" 7 11/16"17 5/16"8 2 1/16"52 3/16"5 5 7/8" NOTES 150 MAINS INPUT • POWER SUPPLY UNIT (PSU) WILL ALLOW 110V OR 240V AC INPUT. THE SAME PSU IS USED FOR EU OR US MAINS SUPPLIES. • OTHER THAN CONTROL CABLES, ALL CABLES TERMINATE AT CONTROL BOARD VIA STANDARD PHOENIX CONNECTORS. • CABLE LOOM LENGTH SUPPLIED AT APPROX. 3m [118"]. LOOM CAN BE EXTENDED UP TO MAXIMUM OF APPROX. 10m [400"]. • MINIMUM CABLE BEND RADIUS 25mm [1"]. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 0015 WWW NET . . SHEET 6 FUTUREAUTOMATION