Future Automation LSM-TU-HF6 technical sheet

Page 1

LSM-TU-HF 6 LIFT SYSTEM TELESCOPIC WITH HEAVY FLAP TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

LSM-TU-HF 6 LIFT SYSTEM TELESCOPIC WITH HEAVY FLAP SPECIFICATION MEASUREMENTS Maximum Screen Size 805mm (31 11/16") Height, 60mm (2 3/8") Depth Maximum Weight Capacity 30Kg (66lb) Speed 40mm/s Maximum Lift Distance 1349mm (53 1/8") from top of screen to cabinet top Internal Cabinet Height 950mm (37 3/8") Decibel Rating 52dB Packaging Dimensions TBC Shipping Weight TBC Movement Type Motorised Power Supply Required 110V - 240V AC Power Consumption 250 - 500W Power Consumption Standby 3W Mounting Patterns Supported VESA 400, 300, 200 W x 400, 300, 200 H Control Options IR Remote, RS232, Contact Closure Product Options / Features Specific B&O and Loewe mounts / adapters, Custom RAL paint finishes Package Contents Mechanism, IR remote control Marine Suitable No TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

LSM-TU-HF 6 LIFT SYSTEM TELESCOPIC WITH HEAVY FLAP CABLE ROUTING Screen Cables enter the top of the Telescopic Unit and are fed down through the Cable Track within. This can be accessed by removing the two front covers of the Telescopic Unit. The cables then pass through the LSM Beam and into the LSM Cable Track. Cables must be routed carefully to prevent any interference with the LSM beam as it operates. Screen and Mechanism cables should be routed to a control box outside of the cabinet via an opening in the back of the cabinet or a conduit leading to the bottom. SCREEN CABLES MECHANISM CABLES POWER CABLE A TO MAINS POWER DETAIL A TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

LSM-TU-HF 6 LIFT SYSTEM TELESCOPIC WITH HEAVY FLAP MECHANISM UP - OUT OF CABINET 13/16" 20 1/8" Aperture Depth = Minimum Distance 3 Screen Depth + 140 [5 1/2"] from Screen to Base Panel to Minimum 150 [5 7/8"] Edge of Base Cabinet Aperture Maximum 200 [7 7/8] SECTION D-D B 13/16" 20 D D 5 3/4" 31 11/16" 146 805 Back of Mechanism 53 1/8" 13/16" to Mount 1349 20 13/16" Maximum 20 Lift Distance DETAIL C C 37 3/8" 950 Internal Cabinet Height Internal Cabinet Width = Screen Width + 180 [7 1/16"] Minimum Width = 1000 [39 3/8"] B SECTION B-B TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

LSM-TU-HF 6 LIFT SYSTEM TELESCOPIC WITH HEAVY FLAP MECHANISM DOWN - IN CABINET Aperture Width = Screen Width +46mm [1 13/16"] Maximum Flap Weight 5Kg [11Ibs] Aperture Depth = Screen Depth + 140 [5 1/2"] Minimum 150 [5 7/8"] 5 3/4" 146 Maximum 200 [7 7/8"] Back of Cabinet to Mount SECTION D-D D 9/16" 13/16" 15 20 Minimum Distance Maximum between Screen Thickness and Cabinet Top of Base and Cabinet Top 31 11/16" 805 37 3/8" Max 950 Screen Internal Height Cabinet Height 5 1/8" 130 6 15/16" Minimum Screen 177 Height from Base D of Cabinet TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 5 FUTUREAUTOMATION

Page 6

LSM-TU-HF 6 LIFT SYSTEM TELESCOPIC WITH HEAVY FLAP BASE PANEL AND FLAP PANEL DETAILS 3/8" 3/8" Flap depth dimensions are based on a 3mm thick piano hinge 10 10 Required flap dimensions may vary dependant on the hinge used IMPORTANT: Flap Panel weight must not exceed 5Kg [11Ibs] 1/16" 2 DETAIL E E FLAP PANEL Flap Panel Depth = Cabinet Aperture -6mm [1/4"] Minimum 144mm [5 11/16"] Maximum 194mm [7 5/8"] Flap Panel Width = Cabinet Aperture Width -6mm [1/4"] 19 11/16" 1" 500 25 Cut-out for HF Push Rod BASE PANEL C L Base Panel Depth = 3 9/16" Cabinet Aperture 90 -34mm [1 5/16"] Minimum 116mm [4 9/16"] 2 15/16" Maximum 166mm [6 9/16"] 75 Base Panel Width = Cabinet Aperture Width -6mm [1/4"] TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

LSM-TU-HF 6 LIFT SYSTEM TELESCOPIC WITH HEAVY FLAP 15 3/4" 400 SCREEN MOUNT ADJUSTABILITY 11 13/16" A standard adjustable height VESA 400 mount is included. This is also 300 compatible with VESA 300 and 200 mounting patterns 7 7/8" 200 C L C L 20 1/4"515

37 1/2" 34 3/4" 953 883 Highest possible mount height Lowest possible mount height TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 7 FUTUREAUTOMATION

Page 8

LSM-TU-HF 6 LIFT SYSTEM TELESCOPIC WITH HEAVY FLAP The Flap Plate is attached to the under MECHANISM INSTALLATION OVERVIEW side of the Flap and fixings are concealed with a magnetic Cover Plate The HF Unit is fixed to the rear face of the cabinet with wood screws. F The Flap Panel is attached to a hinge at the back of the cabinet aperture. DETAIL F The outer limits of the travel of the actuator can be adjusted to alter the Open and Closed positions of the Flap. The LSM is fixed to the back of the cabinet with wood screws. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 8 FUTUREAUTOMATION

Page 9

LSM-TU-HF 6 LIFT SYSTEM TELESCOPIC WITH HEAVY FLAP OVERALL MECHANISM DIMENSIONS 86 7/16" 2196 23 1/16" 585 37 3/16" 37 5/16" 945 948 37 3/8" Back 949 Tray Height 3 15/16" 100 6 15/16" 19 3/4" 31 5/16" 177 501 795 22 5/16" 568 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 9 FUTUREAUTOMATION

Page 10

LSM-TU-HF 6 LIFT SYSTEM TELESCOPIC WITH HEAVY FLAP CONTROL BOX DIMENSIONS 16" 407

20 max. 13/16" max.

RS232 PORT CONTACT CLOSURE PORT IR OUTPUT 1/4" 52 INDICATOR LED 7 2 1/16" EMERGENCY STOP CONNECTOR 8 5 IR LEAD INPUT 5/16" 3/16" 3.5mm [1/8"] JACK 5 7/8" 150 NOTES CABLE LOOM LENGTH SUPPLIED AT APPROX. 3m [118"] CONTOL BOX MUST BE LOCATED IN ACCESSIBLE LOCATION TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 10 FUTUREAUTOMATION