Future Automation LSM-TU-HF4 technical sheet

Page 1

LSM-TU-HF 4 LIFT SYSTEM TELESCOPIC WITH HEAVY FLAP TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

LSM-TU-HF 4 LIFT SYSTEM TELESCOPIC WITH HEAVY FLAP SPECIFICATION MEASUREMENTS Maximum Screen Size 670mm (26 3/8") Height, 60mm (2 3/8") Depth Maximum Weight Capacity 30Kg (66lb) Speed 40mm/s Maximum Lift Distance 1122mm (44 3/16") from top of screen to cabinet top Internal Cabinet Height 820mm (32 5/16") Decibel Rating 52dB Packaging Dimensions TBC Shipping Weight TBC Movement Type Motorised Power Supply Required 110V - 240V AC Power Consumption 250 - 500W Power Consumption Standby 3W Mounting Patterns Supported VESA 400, 300, 200 W x 400, 300, 200 H Control Options IR Remote, RS232, Contact Closure Product Options / Features Specific B&O and Loewe mounts / adapters, Custom RAL paint finishes Package Contents Mechanism, IR remote control Marine Suitable No TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

LSM-TU-HF 4 LIFT SYSTEM TELESCOPIC WITH HEAVY FLAP CABLE ROUTING Screen Cables enter the top of the Telescopic Unit and are fed down through the Cable Track within. This can be accessed by removing the two front covers of the Telescopic Unit. The cables then pass through the LSM Beam and into the LSM Cable Track. Cables must be routed carefully to prevent any interference with the LSM beam as it operates. Screen and Mechanism cables should be routed to a control box outside of the cabinet via an opening in the back of the cabinet or a conduit leading to the bottom. SCREEN CABLES MECHANISM CABLES POWER CABLE A TO MAINS POWER DETAIL A TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

LSM-TU-HF 4 LIFT SYSTEM TELESCOPIC WITH HEAVY FLAP MECHANISM UP - OUT OF CABINET Aperture Depth = Screen Depth + 140 [5 1/2"] Minimum 150 [5 7/8"] 13/16" Maximum 200 [7 7/8"] 20 Minimum Distance 1/8" 3 from Screen to Base Panel to Edge of Base 13/16" Cabinet Aperture 20 B 26 3/8" 670 Max Screen 2 9/16" Height 66 44 3/16" 1122 5 3/4" Maximum 146 Lift Distance Back of Mechanism to Mount 13/16" 13/16" 20 20 DETAIL C C 32 5/16" 820 Internal Cabinet Height Internal Cabinet Width = Screen Width + 180 [7 1/16"] Minimum Width = 1000 [39 3/8"] B SECTION B-B TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

LSM-TU-HF 4 LIFT SYSTEM TELESCOPIC WITH HEAVY FLAP MECHANISM DOWN - IN CABINET Aperture Width = Screen Width +46mm [1 13/16"] Maximum Flap Weight 5Kg [11Ibs] Aperture Depth = Screen Depth + 140 [5 1/2"] Minimum 150 [5 7/8"] Maximum 200 [7 7/8"] 5 3/4" 146 Back of 3/8" Cabinet to 10 Mount Minimum Distance between Screen D and Cabinet Top 13/16" 20 Maximum Thickness of Base and Cabinet Top 26 3/4" 680 32 5/16" Max 820 Screen Internal Height Cabinet Height 5 1/8" 130 Minimum Screen 6 5/16" 161 Height from Base D of Cabinet SECTION D-D TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 5 FUTUREAUTOMATION

Page 6

LSM-TU-HF 4 LIFT SYSTEM TELESCOPIC WITH HEAVY FLAP BASE PANEL AND FLAP PANEL DETAILS 3/8" 3/8" Flap depth dimensions are based on a 3mm thick piano hinge 10 10 Required flap dimensions may vary dependant on the hinge used IMPORTANT: Flap Panel weight must not exceed 5Kg [11Ibs] 1/16" 2 DETAIL E E FLAP PANEL Flap Panel Depth = Cabinet Aperture -6mm [1/4"] Minimum 144mm [5 11/16"] Maximum 194mm [7 5/8"] Flap Panel Width = Cabinet Aperture Width -6mm [1/4"] 19 11/16" 1" 500 25 Cut-out for HF Push Rod BASE PANEL C L Base Panel Depth = 3 9/16" Cabinet Aperture 90 -34mm [1 5/16"] Minimum 116mm [4 9/16"] Maximum 166mm [6 1/2"] 2 15/16" 75 Base Panel Width = Cabinet Aperture Width -6mm [1/4"] TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

LSM-TU-HF 4 LIFT SYSTEM TELESCOPIC WITH HEAVY FLAP SCREEN MOUNT ADJUSTABILITY A standard adjustable height VESA 400 mount is included. This is also 15 3/4" compatible with VESA 300 and 200 mounting patterns 400 11 13/16" 300 7 7/8" 200 20 1/4" 515 29 9/16" 26 13/16" 751 681 Highest Possible Lowest Possible Centreline of Mount Centreline of Mount TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 7 FUTUREAUTOMATION

Page 8

LSM-TU-HF 4 LIFT SYSTEM TELESCOPIC WITH HEAVY FLAP MECHANISM INSTALLATION OVERVIEW The Flap Plate is attached to the under The HF Unit is fixed to the rear face side of the Flap and fixings are of the cabinet with wood screws. concealed with a magnetic Cover Plate. F The Flap Panel is attached to a hinge at the back of the cabinet aperture. DETAIL F The outer limits of the travel of the actuator can be adjusted to alter the Open and Closed positions of the Flap. The LSM is fixed to the back of the cabinet with wood screws. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 8 FUTUREAUTOMATION

Page 9

LSM-TU-HF 4 LIFT SYSTEM TELESCOPIC WITH HEAVY FLAP OVERALL MECHANISM DIMENSIONS 73 3/8" 1864 23 1/16" 585 32 3/16" 818 32 1/4" 32 1/16" Back 819 815 Tray Height 3 15/16" 100 19 3/4" 501 31 5/16" 6 15/16" 795 177 22 5/16" 568 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 9 FUTUREAUTOMATION

Page 10

LSM-TU-HF 4 LIFT SYSTEM TELESCOPIC WITH HEAVY FLAP CONTROL BOX DIMENSIONS 207 8 1/8" 13/16" max.20 max.

RS232 PORT CONTACT CLOSURE PORT IR OUTPUT 1/4" 52 INDICATOR LED 7 2 1/16" EMERGENCY STOP CONNECTOR 8 5 IR LEAD INPUT 5/16" 3/16" 3.5mm [1/8"] JACK 5 7/8" 150 NOTES CABLE LOOM LENGTH SUPPLIED AT APPROX. 3m [118"] CONTOL BOX MUST BE LOCATED IN ACCESSIBLE LOCATION TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 10 FUTUREAUTOMATION