Future Automation DCL-M3 technical sheet

Page 1

DCL-M3 MARINE DOME CAMERA LIFT MECHANISM AS SUPPLIED TECHNICAL SHEET (CAMERA NOT SUPPLIED) UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 1 FUTUREAUTOMATION

Page 2

DCL-M3 MARINE DOME CAMERA LIFT SPECIFICATION MEASUREMENTS Product Dimensions 490mm [19 5/16"] W x 630mm [24 13/16"] L 260mm [10 1/4"] Maximum Camera Size Maximum Weight Capacity 5Kg [11lb] Max. Movement Type Motorised Control System Housed externally in IP66 Control box on 3m [10'] Loom Power Supply Required 110V - 240V AC 50/60Hz Power Consumption Max. 720W Power Consumption Standby 3W Control Options IR Remote, RS232, Contact Closure Product Options / Features Custom height mechanisms, Custom mounts / adapters, Custom RAL paint finishes, Marine suitable version Package Contents Mechanism, IR remote control Environment Marine Mecahnism: BLACK - RAL9005 Standard Colour Camera Mount: WHITE - RAL9910 Satin Finish Marine Suitable Yes TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 2 FUTUREAUTOMATION

Page 3

DCL-M3 MARINE DOME CAMERA LIFT 24 13/16" 630 Mechanism Total Length 10 1/2" GENERAL DIMENSIONS Cable Exit 266 Ceiling Aperture A Representative Ceiling Panel - Not Supplied

145 5 11/16"

7 5/16" SECTION B-B 185 |CAMERA HIDDEN| B B Moving Panel 45° 260 10 1/4" 9/16" max. 1/16" max. 15 max. 2 max. 1/8" min. 3 min. A 19 5/16" 490 Mechanism Width 14 3/16" 7 1/16" SECTION A-A 360.0 SECTION B-B |CAMERA HIDDEN| 180.0 |CAMERA REVEALED| 10 1/4" max. See Sheet 4 for 260 max. Options Camera Diameter Mount Angle TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 3 FUTUREAUTOMATION

Page 4

DCL-M3 MARINE DOME CAMERA LIFT HEIGHT OPTIONS The DCL-M3 is available in 6 standard heights to accommodate different cameras. Other height options available on request. When placing an order, please reference one of the order codes listed below. Mechanism Height Max Camera Size Order Code mm [inch] mm [inch] DCL-M3-180 180 [7 1/16] 55 [2 3/16] H x Ø260 [10 1/4] Mechanism DCL-M3-205 205 [8 1/16] 80 [3 1/8 ] H x Ø260 [10 1/4] Height DCL-M3-240 240 [9 7/16] 115 [4 1/2 ] H x Ø260 [10 1/4] DCL-M3-270 270 [10 5/8 ] 145 [5 11/16] H x Ø260 [10 1/4] DCL-M3-300 300 [11 13/16] 175 [6 7/8 ] H x Ø260 [10 1/4] DCL-M3-360 360 [14 3/16] 235 [9 1/4 ] H x Ø260 [10 1/4] Max Drop = Camera Height Camera Height - 5mm [3/16"] For Cameras smaller than 160mm [6 5/16"] see DCL-M1 technical sheet. For Cameras smaller than 210mm [8 1/4"] see DCL-M2 technical sheet. Camera

For Residential/Commercial applications please see DCL-R technical documentation. TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 4 FUTUREAUTOMATION

Page 5

DCL-M3 MARINE DOME CAMERA LIFT MOUNT ANGLE CONFIGURATION The mount angles can be removed and mounted on the ends of the mechanism to suit different ceiling installations. Standard Side Alternative Mount End Mount 24 13/16" 24 13/16" 630 630 For 4 x Marine suitable M8 14 15/16" 23 5/8" ±3/16" 380 Studding 600 ±5 (Not supplied) 18 1/8" ±3/16" 14 15/16" 16 9/16" 19 5/16" 420 490 460 ±5 380 5/16" 5/16" 8.5 8.5 3 7/16" 87.5 9/16" max. 15 max.

1 15/16" 50 50 TECHNICAL SHEET 1 15/16" UK +44 (0) 1438 833577 US +1 (603) 742 9181

ISSUE 004 WWW NET . . SHEET 5 FUTUREAUTOMATION

Page 6

DCL-M3 MARINE DOME CAMERA LIFT CAMERA MOUNT Custom WHITE PAINTED Twist-IN camera mount for easy installation and servicing. Ensure camera mount clicks fully into place before operating mechanism. 3mm Thick Slotted Aluminium camera mount plate provided. If required, drill additional holes to mount camera. 1/4" 7 10 1/4" 260 Twist-IN Camera Camera Mount Mount Plate 1 15/16" 50 0" 0 1 3/8" 35 4 13/16" 123 TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 6 FUTUREAUTOMATION

Page 7

DCL-M3 MARINE DOME CAMERA LIFT MOVING PANEL INSTALLATION Custom Twist-IN panel mount included for easy installation and servicing. 1. Send Mechanism to its CLOSED position (camera lift UP & panel slide Down. 2. Install the jig panel into the mechanism by lifting and rotating. If the 4 clearance holes do not line up with the bolts above, rotate 120° Twist-IN Panel 3. Mount Loosen the 4x M5 CSK bolts (DO NOT REMOVE) and centre the moving panel in its aperture using 3mm packers. Then fully tighten all 4 bolts. 4. Twist to release the jig panel from the mechanism. 4x Panel Adjustment Bolts 5. Remove the jig panel from the Twist-IN Mount & replace with the finished panel (not-supplied) Ensure panel mount clicks fully into place before operating mechanism. 1/8"

TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 7 FUTUREAUTOMATION

Page 8

DCL-M3 MARINE DOME CAMERA LIFT CONTROL BOX DETAILS 3/16" 6 11/16" 4.5 5 1/16" 9 1/4" 170 235 128 118 1/8" max. 3000 max. CABLE LOOM LENGTH APPROX.

315 100 250 12 3/8" 3 15/16" 9 13/16"

5/8" 16.5 2 x 8 CORE CABLE MOTOR POWER + SIGNAL 6mm [0.25"] dia. EU SPEC: 0.25mm² US SPEC: 24AWG 3 CORE CABLE MAINS SUPPLY NOTES 6mm [0.25"] dia. • ENCLOSURE AND CABLE GLANDS RATED TO IP56. EU SPEC: 0.75mm² • ENCLOSURE AND LID FIXINGS ALL MADE FROM GEWISS GW PLAST 75. 2 x 3 CORE CABLE US SPEC: 18AWG ENCLOSURE MATERIAL SUITABLE FOR TEMPERATURES +60 • C TO -25 C. SWITCH LIMITS 3 CORE CABLE • INTERNAL POWER SUPPLY UNIT (PSU) WILL REQUIRE 110V (6A) OR 240V (3A) AC INPUT. 4mm [0.15"] dia. IR RECEIVER • OTHER THAN CONTROL CABLES, ALL CABLES TERMINATE AT CONTROL BOARD VIA STANDARD PHOENIX CONNECTORS. EU SPEC: 0.25mm² 3mm [0.12"] dia. • CABLE LOOM LENGTH SUPPLIED AT APPROX. 3m [118"]. LOOM CAN BE EXTENDED UP TO MAXIMUM OF APPROX. 10m [400"]. US SPEC: 24AWG EU SPEC: 0.12mm² • MINIMUM CABLE BEND RADIUS 25mm [1"]. US SPEC: 25AWG TECHNICAL SHEET UK +44 (0) 1438 833577 US +1 (603) 742 9181 ISSUE 004 WWW NET . . SHEET 8 FUTUREAUTOMATION