Rako RAK-LINK Technical Specifications

Page 1

Datasheet RAK-LINK Wired System Connection Unit What is the RAK-LINK? Technical Data The RAK-LINK is an essential component of any Rako Wired Dimensions 137x253x80mm network. Input Supply 230V AC 50Hz The RAK-LINK provides power to the Wired network and Protection 6A Type B MCB protection required communicates between the Wired network and the RAK8 Output 15V DC 3A for Rako wired network units. Up to 32 circuits can be mapped to a single RAK-LINK (4 RAK8 units); multiple RAK-LINKs may be used should Weight 2Kg more circuits be required. Climate Range Temperature +2C to +40C The RAK-LINK supports up to two CAT5 or CAT6 cables via Humidity +5% to 95% the punch-down connector and has three RJ11 ports that non-condensing can connect Rako Wired accessories. Cable types CAT5e, CAT6, RJ11 The power supply on the RAK-LINK is capable of powering Terminals 3-way terminal block for mains input, up to 40 Rako Wired devices via the punch-down 8 way krone connector for Rako Wired network connectors. Ports 3 x RJ11 (Rako wired network only), 1 x RJ45 (RAKs only) Dimensions Cable entry Multiple knockouts on top, bottom, side and rear Standards RoHS UKCA, CE EN 60669-2-5:2016 Communication CAN and RS485 Installation and Setup For information on installing and setting up the RAK-LINK, see the RAK-LINK Manual. Connections Document Version 2.0.0 telephone +44 (0) 1634 226666 | www.rakocontrols.com WE RESERVE THE RIGHT TO CHANGE THE SPECIFICATION AND DATA HEREWITH WITHOUT NOTICE. © 2024 RAKO CONTROLS LIMITED