Rako RLED30BOOST Technical Specifications

Page 1

Datasheet RLED30BOOST RLED30/WLED30 Booster Module What is the RLED30-BOOST? Technical Data The RLED30BOOST is a voltage booster for the Dimensions 172x46x40mm RLED30CV4+ and WLED30CV4, the device is used when Input Supply 12/24V DC (load dependant) the total load is approaching or exceeding the maximum limit of the RLED30CV4+ or the WLED30CV4. Weight 142g NB Housing UL94-V0 The RLED30BOOST is not a programmable dimmer, its Connections 2-way terminal for DC supply control relies on the PWM signal from the RLED30CV4+ 5-way screw terminal from LED tape or WLED30CV4. There must be no more than 10 5-way screw terminal to LED tape RLED30BOOST units per RLED30CV4+ or WLED30CV4. Protection Reverse polarity input protection Connections/Dimensions Output current limit protection Fuse 10A blade fuse Climate Range +2C to +40C Humidity +5% to 95% non-condensing Load types Constant Voltage LED Minimum Load 1W Maximum Load 12V DC 3 Channel, 90W 12V DC 4 Channel, 120W 24V DC 3 Channel, 180W 24V DC 4 Channel, 240W 2 2 Terminal Size Solid - 4.0mm ,Stranded - 2.5mm Standards RoHS UKCA, CE EN 60669-2-5:2016 Communication PWM Installation and Setup For information on installing and setting up the RLED30BOOST see the Instruction Manual. Document Version 2.0.1 telephone +44 (0) 1634 226666 | www.rakocontrols.com WE RESERVE THE RIGHT TO CHANGE THE SPECIFICATION AND DATA HEREWITH WITHOUT NOTICE. © 2024 RAKO CONTROLS LIMITED