Rako RMT-500 Technical Specifications

Page 1

Datasheet RMT-500 500W Trailing Edge Dimmer What is the RMT-500? Technical Data The RMT-500 is a trailing-edge dimmer used in a Rako Dimensions 138x46x40mm Wireless system. Once programmed into a system it can be Input Supply 230V AC 50Hz controlled from any Rako transmitter such as the RCM, RNC, Weight 120g RK-EOS, RK-MOD or HUB. Housing UL94-V0 The RMT-500 has been designed for flexible installation, Protection Short circuit protection Thermal shutdown for a retrofit solution it can be installed behind a ceiling or if the lighting is wired back to a central location it can be Connections Supply IN: 3-way screw terminal mounted centrally using the supplied mounting bracket. Load OUT: 3-way screw terminal Climate Range Temperature +2C to +40C Features Humidity +5% to 95% non-condensing • Up to 16 custom scenes Load Types Trailing Edge Dimmable only: • Keypad or software programmable Mains LED • Customisable fade rates and dimming profiles Electronic low voltage transformer • LED diagnostic feedback Minimum Load 1W • Manual test/programming button Maximum Load Mains LED - 250W Electronic low voltage transformer - 450W Connections/Dimensions 2 Terminal Sizes 4mm Standards RoHS UKCA, CE EN 60669-2-5:2016 Communication FM radio, 433.9MHz Installation and Setup For information on installing and setting up the RMT-500, see the RMT-500 Manual. Document Version 2.0.0 telephone +44 (0) 1634 226666 | www.rakocontrols.com WE RESERVE THE RIGHT TO CHANGE THE SPECIFICATION AND DATA HEREWITH WITHOUT NOTICE. © 2024 RAKO CONTROLS LIMITED