Rako WRB100 Technical Specifications

Page 1

Datasheet WRB100 Rako Wireless Signal Repeater What is the WRB100? Technical Data The WRB100 is a repeater used in Wireless and Wired networks. Dimensions 172x40x46mm There are two modes that the WRB100 can operate: Input Supply 12V DC (PSU included) • Wireless mode Weight 175g • Wired spine mode Housing UL94-V0 Wireless mode repeats a wireless message when it is received, Connections Wireless - jack plug for 12V DC commonly used to extend the range of transmitted commands Wired - RJ11socket or punch-down to the receivers. connector Climate Range Temperature +2C to +40C Wired spine mode links two or more WRB100 units via CAT5/ Humidity +5% to 95% CAT6 using the on-board punch-down connector, this is non-condensing commonly used when there is a large area between transmitters Cable type UTP CAT5e, CAT6, RJ11 and receivers which needs to be covered which would not be Standards RoHS feasible in Wireless repeater mode. UKCA, CE EN 60669-2-5:2016 Communication Rakom coded FM radio 433.9MHz Connections/Dimensions CAN bus Installation and Setup For information on installing and setting up the WRB100, see the WRB100 Manual. Document Version 2.0.0 telephone +44 (0) 1634 226666 | www.rakocontrols.com WE RESERVE THE RIGHT TO CHANGE THE SPECIFICATION AND DATA HEREWITH WITHOUT NOTICE. © 2024 RAKO CONTROLS LIMITED