Rako RK-PIR Technical Specifications

Page 1

Datasheet RK-PIR Wireless Presence Sensor What is the RK-PIR? Technical Data The RK-PIR is a presence Sensor for use with the Rako Dimensions 61.5x61.5x32mm wireless system. It is supplied with an RK-BP battery pack. (48 - 51mm ceiling cutout) Input Supply 3V Battery Pack (RK-BP included) Features include: Replace with 2 x AA 1.5V L91 Lithium (LiFeS2) batteries only • Three modes Weight 47g Always (not time-based) Connections 2-pin connector to RK-BP Time range mode Sunlight mode Climate Range +2C to +40C • Webpage programmable Humidity +5% to 95% non-condensing • Absence detection IP Rating IP20 The introduction of programming through the HUB via Standards RoHS the webpages using ‘Hub managed mode’, enables time- UKCA, CE EN 60669-2-5:2016 dependent automatic Scene selection, allowing for different Communication 433.9MHz encoded FM radio Scenes at different times of the day. Connections/Dimensions Installation and Setup For information on installing and setting up the RK-PIR see the RK-PIR Manual. Coverage Document Version 2.0.0 telephone +44 (0) 1634 226666 | www.rakocontrols.com WE RESERVE THE RIGHT TO CHANGE THE SPECIFICATION AND DATA HEREWITH WITHOUT NOTICE. © 2024 RAKO CONTROLS LIMITED