Lutron RadioRA 3 – Processor
The RadioRA 3 processor is the controller for a RadioRA 3 system, and links its keypads, dimmers, sensors and blinds to the home network and the Lutron app. It is powered over its network cable. The RRKE-PROC3-KIT1 includes a PoE injector and takes a shelf, recess or junction-box adapter; the RRKE-PROC3-CW includes the recess and junction-box adapters.
Supplied as part of a Lutron systemThe RRKE-PROC3-KIT1 is part of a Lutron system that must be designed, installed and commissioned by a Lutron certified engineer. Contact our design and engineering team for a quotation.Contact our team for a quotation
- Refurbished In-House
Components repaired or replaced where needed, then cleaned and bench tested.New, Box Opened
Unused surplus stock with opened packaging. This unit is sold untested. - Specification Help
Need help with specification or compatibility? Speak to our team.
Specification
Additional information
| Manufacturer | Lutron |
|---|---|
| Range | RadioRA 3 |
| Product Type | Processors |
| Power | Power over Ethernet, IEEE 802.3af or 802.3at; Class 1 device, 1.5 W typical, 4.0 W maximum |
| Network | One RJ-45 Ethernet port, 10/100 Mbit/s |
| Network cable | Cat5e or better, up to 100 m from the router including the PoE injector; one home run per processor; indoors only |
| Communication | Clear Connect – Type A RF at 868 MHz (in-line controls, lamp dimmers, Pico, sensors, blinds) and Clear Connect – Type X RF at 2.4 GHz (Vierti keypads, RGB + tunable white tape) |
| Type A range | Devices within 9 m of the processor or a repeater; repeaters up to 18 m apart; up to 4 repeaters |
| Type X range | Devices within 23 m of the processor; at least two Type X devices within 6 m of it |
| Devices per processor | Up to 100 Type X and 95 Type A devices |
| Processors per system | Up to 4 |
| Setup | Lutron Designer PC software and the Lutron app; internet needed for first setup and firmware updates |
| Without internet | Local control carries on if the internet connection drops |
| Integration | LEAP API for AV and security systems; works with Amazon Alexa, Apple HomeKit, Google Assistant, Sonos and Ring |
| Timeclock | Kept through a power cut by an internal battery |
| Dimensions | 102.67 mm diameter, 29.82 mm deep |
| Operating environment | 0–40 °C, 0–90 % RH non-condensing, indoor only |
| Approvals | CE, UKCA |
| In the kit | Processor, PoE injector with UK, EU, US, Australian and Indian plugs, and two Ethernet leads |
| Mounting | Takes a shelf, recess or junction-box mounting adapter, sold separately |
Specification Sheets & Documents
- RadioRA 3 Processors – product specifications (3691297a, 01.09.25, UK & Europe)View PDF: RadioRA 3 Processors – product specifications (3691297a, 01.09.25, UK & Europe)
- RadioRA 3 Wireless Processor (RRKE-PROC3) Installation Guide (P/N 044411 Rev A, 12/2024)View PDF: RadioRA 3 Wireless Processor (RRKE-PROC3) Installation Guide (P/N 044411 Rev A, 12/2024)
- RadioRA 3 System Architecture – architecture for 230 VAC and 868 MHz regions (P/N 368-6138/EA Rev A, 01/2025)View PDF: RadioRA 3 System Architecture – architecture for 230 VAC and 868 MHz regions (P/N 368-6138/EA Rev A, 01/2025)
All part codes
2 codesFilter any column. Choose a code to see it on this page.
| Part code | Model |
|---|---|
| RRKE-PROC3-KIT1 | RRKE-PROC3-KIT1 |
| RRKE-PROC3-CW | RRKE-PROC3-CW |
No codes match. Clear the filter to see them all.
Not sure it’s the right part?
Speak to our in-house specialists about your system, we’ll help identify the part you need.
