Rako – RAVIR – Wireless – Infrared Interface
The RAVIR is an infrared interface for a Rako wireless system, which turns standard RC5 infrared commands into Rako wireless ones so that an IR remote can select lighting scenes. It can control one, two or four rooms. The RAVIR needs its own 9V or 12V DC supply.
Contact us for pricingThe RAVIR is priced on request. Tell us the quantity you need and we will send you a price.Contact us for pricing
- Refurbished In-House
Components repaired or replaced where needed, then cleaned and bench tested.New, Box Opened
Unused surplus stock with opened packaging. This unit is sold untested. - Specification Help
Need help with specification or compatibility? Speak to our team.
Specification
Additional information
| Manufacturer | Rako |
|---|---|
| Range | Rako Wireless |
| Model | RAVIR |
| Type | Infrared Interface |
| Condition | New |
| Configuration / programming method | Initial setup & programming – Via Windows / MacOS programming software (Engineer required) / Tweaks to lighting scenes and levels – Via Windows / MacOS programming software (Engineer required). Or via iOS / Android app (By end user) |
| Warranty | 2 years hardware warranty provided by Rosette Electrical |
| Infrared | RC5; default base address 5 (VCR1) |
| Default setting | One room: scenes 1-4, off, master raise and lower |
| Rooms | 1 by default; 2 or 4 when set in Rasoft Pro |
| IR receiver | On the unit; removable for remote mounting on a 3-core cable |
| Input supply | External 9V or 12V DC power supply |
| Fixing | Mounting bracket |
| Communication | Infrared (RC5) in; FM radio (Rako wireless) out |
Specification Sheets & Documents
- Rako - RAVIR - Instruction ManualView PDF: Rako - RAVIR - Instruction Manual
Not sure it’s the right part?
Speak to our in-house specialists about your system, we’ll help identify the part you need.
